• 한국의학물리학회지:의학물리
• /
• 제22권2호
• /
• pp.79-84
• /
• 2011

본 연구에서는 GEANT4 toolkit을 이용하여 의료용 선형가속기에 대한 몬테칼로(Monte Carlo) 전산모사를 하였다. Medical Linac2 예제를 수정해서 사용하였다. 에너지스펙트럼, 최빈에너지, 평균에너지를 EGS4 결과와 비교 하였고 선속의 중심에서부터 반경에 따른 단위면적당 광자수, 단위면적당 에너지, 평균에너지를 분석하였다. 그 결과 EGS4 결과와 큰 차이를 보이지 않기 때문에 Medical Linac2 예제의 선속특성에 관한 전산모사에 큰 문제점은 없는 것으로 판단된다. 같은 헤드구조에서도 Physics List의 모델에 따라서는 결과에 차이가 발생하므로 연구 환경에 알맞은 Physics List 모델을 선택하는 것이 중요하다고 판단된다. 본 연구는 처음 몬테칼로 전산모사를 접하는 사용자가 선속특성에 대한 전산모사를 수행하고 6 MV 광자선속의 특성을 분석하는 과정에 많은 도움이 될 것으로 사료된다.

• 한국의학물리학회지:의학물리
• /
• 제17권4호
• /
• pp.224-231
• /
• 2006

본 연구에서는 MCNPX 코드를 사용하여 6 MeV 전자선의 에너지분포를 계산하였다. 이를 위하여 선형가속기(ML6M; Mitsubishi, Japan)의 헤드를 모델화하였다. 전자선의 초기에너지 분포는 가우시안으로 가정하였으며, 이 때 평균에너지는 측정과 계산으로 구한 $R_{50}$과 공기중 선량프로 파일을 평가하여 결정하였다. 결정된 빔 변수를 적용하여 선형가속기 헤드속 주요 위치에서의 전자선 에너지분포를 계산하였다. 어플리케이터 출구에서의 광자에 대한 에너지분포를 이용하여 깊이선량률에서 오염광자의 영향을 분석하였다.

• 한국의학물리학회지:의학물리
• /
• 제28권2호
• /
• pp.45-48
• /
• 2017

This paper evaluated the amount of radiation generated by wedge filters during radiation therapy using a high-energy linear accelerator, and the dose to the worker during wedge replacement. After 10-MV photon beam was irradiated with wedge filter, the wedge was removed from the linear accelerator, and the dose rate and energy spectrum were measured. The initial measurement was approximately 1 uSv/h, and the radiation level was reduced to 0.3 uSv/h after 6 min. The effective half-life derived from the dose rate measurement was approximately 3.5 min, and the influence of AI-28 was about 53%. From the energy spectrum measurements, a peak of 1,799 keV was measured for AI-28, while the peak for Co-58 was not measured in the control room. The peaks for Au-106 and Cd-105 were found only measurement was done without wedge removement from the linear accelerator. The additional doses received by the radiation worker during wedge replacement were estimated to be 0.08-0.4 mSv per year.

• 한국의학물리학회지:의학물리
• /
• 제29권3호
• /
• pp.92-100
• /
• 2018

The manufacturer of a linear accelerator (LINAC) has reported that the target melting phenomenon could be caused by a non-recommended output setting and the excessive use of monitor unit (MU) with intensity-modulated radiation therapy (IMRT). Due to these reasons, we observed an unexpected beam interruption during the treatment of a patient in our institution. The target status was inspected and a replacement of the target was determined. After the target replacement, the beam profile was adjusted to the machine commissioning beam data, and the absolute doses-to-water for 6 MV and 10 MV photon beams were calibrated according to American Association of Physicists in Medicine (AAPM) Task Group (TG)-51 protocol. To verify the beam data after target replacement, the beam flatness, symmetry, output factor, and percent depth dose (PDD) were measured and compared with the commissioning data. The difference between the referenced and measured data for flatness and symmetry exhibited a coincidence within 0.3% for both 6 MV and 10 MV, and the difference of the PDD at 10 cm depth ($PDD_{10}$) was also within 0.3% for both photon energies. Also, patient-specific quality assurances (QAs) were performed with gamma analysis using a 2-D diode and ion chamber array detector for eight patients. The average gamma passing rates for all patients for the relative dose distribution was $99.1%{\pm}1.0%$, and those for absolute dose distribution was $97.2%{\pm}2.7%$, which means the gamma analysis results were all clinically acceptable. In this study, we recommend that the beam characteristics, such as beam profile, depth dose, and output factors, should be examined. Further, patient-specific QAs should be performed to verify the changes in the overall beam delivery system when a target replacement is inevitable; although it is more important to check the beam output in a daily routine.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권2호
• /
• pp.281-287
• /
• 2017

본 연구는 방사선 차폐 시 주로 사용되고 있는 콘크리트를 대상으로 차폐 두께를 계산한 연구로서 의료용 선형가속기를 차폐하기 위해 구성되는 벽에 대한 연구이다. 선형가속기에서 발생하는 광자선 에너지 10 MV를 대상으로 MCNPX(Ver.2.5.0)를 이용하여 적절한 차폐 두께를 계산하고자 하였다. 그 결과, 광자선 차폐를 위한 십가층은 순수 콘크리트의 경우 50~100 cm, Boron+polyethylene 첨가 시 80~100 cm에서 형성되었다. 중성자 차폐는 순수 콘크리트의 경우 100~140 cm, Boron+polyethylene 첨가 시 90~100 cm으로 계산되었다. 이를 바탕으로 분석하면, 콘크리트 재질은 Steel 계열을 사용하고 콘크리트에 Boron+polyethylene을 첨가하여 구성하는 것이 가장 효율적인 것으로 판단된다.

• 대한방사선치료학회지
• /
• 제1권1호
• /
• pp.37-42
• /
• 1985

Radiation Therapy(RT) has been used in the treatment of breast cancer for over 80 years. Technically, it should include a part or all of such areas as chest wall or breast, axilla, internal mammary nodes(IM) and supraclavicular nodes (SCL). Authors tried three-field technique for the treatment of breast cancer using 6 MV linear accelerator, exclusively the department of Radiology, Kang-Nam St. Mary's Hospital, at Catholic Medical College. The field junction was checked by a phantom study and radiation doses measured by film densitometry and TLD. The 3 fields we used in this study were two isocentric opposing tangential fields encompassing the breast, chest wall and occasionally IM and one single anterior field encompassing the axilla and SCL. Using appropriate beam blocks and blouses, we were able to avoid unwanted intrinsic divergency of photon beam. Blocking also enabled us to set-up precise radiation field with ease.

• Radiation Oncology Journal
• /
• 제2권2호
• /
• pp.303-309
• /
• 1984

Radiation therapy(RT) has been used in the treatment of breast cancer for over 80years. Technically, it should include a part or all of such areas as chest wall or breast, axilla, internal mammary nodes (IM) and supraclavicular nodes (SCL). Authors tried three-field technique for the treatment of breast cancer using 6-MV linear accelerator, exclusively the department of radiology. Kang-Nam St. Mary's Hospital, at Catholic Medical College. The field junction was checked by a Phantom study and radiation doses measured by film densitometry and TLD. The 3 fields we used in this study were two isocentric opposing tangential fields encompassing the breast, chest wall and occasionally IM and one single anterior field encompassing the axilla and SCL. sing appropriate beam blocks and boluses, we were able to avoid unwanted intrinsic divergency of photon beam. Blocking also enabled us to set-up precise radiation field with ease.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4246-4251
• /
• 2023

The optimized design of a Neutron Activation Analysis (NAA) system, including Delayed Gamma NAA (DGNAA) and Prompt Gamma NAA (PGNAA), has been proposed in this research based on Mevex Linac with 5 MeV electron energy and 50 kW power as a neutron source. Based on the MCNPX 2.6 simulation, the optimized configuration contains; tungsten as an electron-photon converter, BeO as a photoneutron target, BeD₂ and plexiglass as moderators, and graphite as a reflector and collimator, as well as lead as a gamma shield. The obtained thermal neutron flux at the beam port is equal to 2.06 × 10⁹ (# /cm².s). In addition, using the optimized neutron beam, the detection limit has been calculated for some elements such as H-1, B-10, Na-23, Al-27, and Ti-48. The HPGe Coaxial detector has been used to measure gamma rays emitted by nuclides in the sample. By the results, the proposed system can be an appropriate solution to measure the concentration and toxicity of elements in different samples such as food, soil, and plant samples.

• Radiation Oncology Journal
• /
• 제10권2호
• /
• pp.137-145
• /
• 1992

전산화단층촬영에 근거를 둔 3차원선량계산은 소형의 뇌종양에 대한 방사선수술에 있어서 가장 기본이 된다. 본 연구의 방사선수술 프로그램은 전산화단층촬영을 통해 표적 위치, 크기와 모양을 3차원공간에서 결정하고 최적조사면적을 구할 수 있었다. 방사선수술의 선량은 선형가속기의 6메가볼트 고에너지 광자선을 이중 비공면의 회전조사를 가상두부에 실시하여 계산된 3차원적 선량분포와 필름선량계의 실측선량을 비교한 바 거의 일치됨을 확인하였다. 본 연구의 방사선수술에서 $80\%$에서 $50\%$까지 선량곡선의 기울기는 전회전각이 1120도 일때 10 mm 조사면적에서 약 $16.7\%$/mm 였고 30 mm 에서 는 $13.0\%$/mm를 보였다. 또한 표적 주위의 선량분포는 표적내 최대선량값이 $90\%$ 에서 $50\%$ 까지 선량분포의 최대폭은 직경 10 mm조사면에서 2.3 mm를 나타내었으며, $90\%$에서 $20\%$까지의 거리는 5.6 mm를 나타내었으며, 30 mm직경의 조사면에서는 각각 3.5 mm와 9.8 mm를 보였다. 이러한 선량분포의 급격한 기울기는 방사선수술시 표적주위의 치명부위의 손상을 최소화하기 위한 선량최적화 작업에 지침이 될 것으로 생각되며, 또한 방사선수술방법의 차이에 따라 비교자료가 될 수 있을 것으로 생각된다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.235-236
• /
• 2002

A Klystron powered dual photon energy electron linear accelerator 2300 C/D from Varian Associates has been installed in our center. From the radiological safety view as well as treatment planning, the output (contamination) of Bremsstrahlung Radiation with electron beam energy determined accurately. It has been found 0.5% to 4.7% with increasing the electron beam energy which is the clinically not much significant in the treatment of the malignant diseases with the treatment of electron beam.