• 제목/요약/키워드: Linear Region

검색결과 1,480건 처리시간 0.03초

A Simplified Carrier-Based Pulse-Width Modulation Strategy for Two-level Voltage Source Inverters in the Over-modulation Region

  • Jing, Feng;He, Feng-You
    • Journal of Power Electronics
    • /
    • 제17권6호
    • /
    • pp.1480-1489
    • /
    • 2017
  • In this study, a carrier-based pulse-width modulation (PWM) method for two-level voltage source inverters in the over-modulation region is proposed. Based on the superposition principle, the reference voltage vectors outside the linear modulation boundary are adjusted to relocate to the vector hexagon, while their fundamental magnitudes are retained. In accordance with the adjusted reference vector, the corresponding modulated waves are respectively deduced in over-modulation mode I and II to generate the gate signals of the power switches, guaranteeing the linearity of the fundamental output phase voltage in the over-modulation region. Moreover, due to the linear relationship between the voltage vector and the duty ratios, the complicated sector identification and holding angle calculation found in previous methods are avoided in the modulated wave synthesis, which provides great simplicity for the proposed carrier-based over-modulation strategy. Experimental results demonstrate the effectiveness and validity of the proposed method.

선형 시변 시스템의 안정도 영역 (A stability region of linear time-varying systems)

  • 최종호;장태정
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
    • /
    • pp.130-134
    • /
    • 1987
  • 이 논문에서는 매개변수(parameter)들이 시간에 따라 변하는 선형 시변 시스템(linear time-varying system)에서 시스템의 안정도(stability)를 보장할 수 있는 매개변수들의 변동영역(perturbation region of parameters)에 대한 충분조건을 시간영역에서 Lyapunov 방법을 사용하여 구하였다. 그리고 이 충분조건을 만족하는 매개변수 변동영역을 비선형 계획법(nonlinear programing)을 이용하여 구하는 방법을 제시하였다. 시뮬레이션 결과 이 방법으로 지금까지 이루어져 왔던 다른 연구 결과들보다 더 넓고 다양한 매개변수 변동영역을 구할 수 있었다.

  • PDF

은 피복 BSCCO 선재 접합부의 선형전압성분 분석 (Analysis on Linear Voltage Components of Joints Ag-sheathed BSCCO tapes)

  • 황보훈;최세용;강준선;나완수;김정호;주진호
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
    • /
    • pp.166-169
    • /
    • 2000
  • Usually, the critical current of jointed BSCCO tapes degrades quite a bit compared to the normal unjointed tape regions. It has been thought that the current redistribution around the jointed region is the main cause it. We experimentally found the linear voltage components around the jointed area, especially in the transition region, which suggests that the current redistribution around the jointed area is the main reason of the critical current degradations.

  • PDF

Shifted Nadaraya Watson Estimator

  • Chung, Sung-S.
    • Communications for Statistical Applications and Methods
    • /
    • 제4권3호
    • /
    • pp.881-890
    • /
    • 1997
  • The local linear estimator usually has more attractive properties than Nadaraya-Watson estimator. But the local linear estimator gives bad performance where data are sparse. Muller and Song proposed Shifted Nadaraya Watson estimator which has treated data sparsity well. We show that Shifted Nadaraya Watson estimator has good performance not only in the sparse region but also in the dense region, through the simulation study. Ans we suggest the boundary treatment of Shifted Nadaraya Watson estimator.

  • PDF

고조파 주입에 의한 PWM 인버터의 출력전압 증대 (Output Voltage Increment of a PWM Inverter by The Harmonic Injection Method)

  • 박민호;홍순찬;정근진
    • 대한전기학회논문지
    • /
    • 제38권5호
    • /
    • pp.362-369
    • /
    • 1989
  • A method to increase the output voltage of the PWM inverter within linear range is considered. A new modulation wave is used, which is made by injecting the third harmonic wave into the sinusoidal wave. The optimum region for improving the output voltage keeping the linear control characteristic is obtained by digital simulation. Furthermore, the distortion factor in the optimum region is less than that calculated when the maximum output voltage can be obtained in the sinusoidal PWM inverter.

  • PDF

황사 발원지에서 선포토미터를 활용한 에어로졸의 광학적 특성 산출과 미세먼지속 황사구분 (Aerosol Optical Properties Retrieval and Separation of Asian Dust using AERONET Sun/Sky Radiometer Measurement at the Asian Dust Source Region)

  • 신동호;노영민
    • 대한원격탐사학회지
    • /
    • 제32권3호
    • /
    • pp.245-251
    • /
    • 2016
  • 황사의 주요 발원지인 중국 북부 둔황지역에 선포토미터를 설치하여 440, 675, 870 그리고 1020 nm 채널에서 황사의 파장별 입자편광소멸도를 산출하였다. 이와 함께 발원한 황사가 장거리 수송과정에 위치한 제주 고산과 일본 오사카에 설치된 선포토미터를 함께 분석하였다. 황사 발원지에서 1020 nm 파장에서 입자편광소멸도가 0.34로 가장 높은 수치를 보였다. 또한, 초미세먼지농도가 증가하는 경우 입자편광소멸도는 감소하는 경향을 보였다. 우리는 본 연구에서 선포토미터의 입자편광소멸도 산출을 통해 에어로졸에서 황사의 구성 비율이 변화함을 확인하였다.

홍수 위험도 척도 및 예측모형 연구 (Study on Measurement of Flood Risk and Forecasting Model)

  • 권세혁;오현승
    • 산업경영시스템학회지
    • /
    • 제38권1호
    • /
    • pp.118-123
    • /
    • 2015
  • There have been various studies on measurements of flood risk and forecasting models. For river and dam region, PDF and FVI has been proposed for measurement of flood risk and regression models have been applied for forecasting model. For Bo region unlikely river or dam region, flood risk would unexpectedly increase due to outgoing water to keep water amount under the designated risk level even the drain system could hardly manage the water amount. GFI and general linear model was proposed for flood risk measurement and forecasting model. In this paper, FVI with the consideration of duration on GFI was proposed for flood risk measurement at Bo region. General linear model was applied to the empirical data from Bo region of Nadong river to derive the forecasting model of FVI at three different values of Base High Level, 2m, 2.5m and 3m. The significant predictor variables on the target variable, FVI were as follows: ground water level based on sea level with negative effect, difference between ground altitude of ground water and river level with negative effect, and difference between ground water level and river level after Bo water being filled with positive sign for quantitative variables. And for qualitative variable, effective soil depth and ground soil type were significant for FVI.

Function of mORF1 Protein as a Terminal Recognition Factor for the Linear Mitochondrial Plasmid pMLP1 from Pleurotus ostreatus

  • Kim, Eun-Kyoung;Roe, Jung-Hye
    • Journal of Microbiology
    • /
    • 제37권4호
    • /
    • pp.229-233
    • /
    • 1999
  • The mitochondrial plasmid pMLP1 from a white-rot fungus, Pleurotus ostreatus, is a double-stranded DNA containing 381 bp terminal inverted repeat (TIR) whose 5'-ends are covalently bound by terminal proteins. The plasmid contains two major open reading frames (ORFs), encoding putative DNA and RNA polymerases, and a minor ORF encoding a small, highly basic protein. To identify the DNA binding activity that recognizes the TIR region of pMLP1, gel retardation assays were performed with mitochondrial extracts. A specific protein binding to a region between 123 and 248 nt within TIR was observed. We examined whether the gene product of mORF1 bindes to this region specifically. E. coli cell extract which contains an overproduced mORF1 protein formed a complex specific to the region between 123 and 248 nt. Inclusion of mORF1 protein in the specific complex formed between P. ostreatus mitochondrial extract and TIR was confirmed by a supershift assay using polyclonal antibodies against the mORF1 protein. Our result suggest that the product of mORF1 may function as a terminal region recognition factor (TRF), recognizing an internal region in TIR.

  • PDF

A Study on the Confidence Region of the Stationary Point in a second Order Response Surface

  • Jorn, Hong S.
    • Journal of the Korean Statistical Society
    • /
    • 제7권2호
    • /
    • pp.109-119
    • /
    • 1978
  • When a response surface by a seconde order polynomial regression model, the stationary point is obtained by solving simultaneous linear equations. But the point is a function of random variables. We can find a confidence region for this point as Box and Hunter provided. However, the confidence region is often too large to be useful for the experiments, and it is necessary to augment additional design points in order to obtain a satisfactory confidence region for the stationary point. In this note, the author suggests a method how to augment design points "eficiently", and shows the change of the confidence region of the estimated stationary point in a response surface.e surface.

  • PDF

단일이미지에서의 초해상도 영상 생성을 위한 패치 정보 기반의 선형 보간 연구 (Patch Information based Linear Interpolation for Generating Super-Resolution Images in a Single Image)

  • 한현호;이종용;정계동;이상훈
    • 한국융합학회논문지
    • /
    • 제9권6호
    • /
    • pp.45-52
    • /
    • 2018
  • 본 논문은 단일 이미지에서 초해상도 영상 생성을 위해 저해상도 이미지에서 생성한 패치정보를 기반으로 선형보간하는 방법을 제안하였다. 기존의 초해상도 생성 방법인 전역 공간의 회귀 모델을 사용하면 특정 영역에 대해 참조할 정보가 부족하여 일반적으로 품질이 떨어지는 결과가 나타난다. 이러한 결과를 보완하기 위해 제안하는 방법은 초해상도 이미지 생성 과정에서 영상을 패치 단위로 지역을 분할하여 의미있는 정보를 수집하고, 수집된 정보를 기반으로 초해상도 이미지 생성을 위해 확장시킨 이미지 매트릭스 영역의 구성정보를 분석하여 선형 보간 과정을 거치고 패치정보를 대응시켜 탐색한 최적의 패치 정보를 기준으로 선형 보간하는 방법을 제안하였다. 실험을 위해 원본 이미지를 복원된 영상과 PSNR, SSIM으로 비교 평가하였다.