• 인지과학
• /
• 제10권4호
• /
• pp.27-39
• /
• 1999

이 연구에서는 일상적인 글자넓이를 지닌 글자로 구성된 본문에 대해 선호도를 평정하도록 하여 가독성에 관한 연구에서 밝혀진 각 요인들의 수준들 중 가장 선호되는 수준은 어떤 것인가를 알아보고, 각 요인들간 상대적 중요도를 살펴보았다. 네모 틀 글자로 구성된 본문에서 선호도를 살펴본 실험1에서는 요인들간 상대적 중요도의 순위가 글자크기, 글줄간격, 글자넓이, 글줄길이, 글자간격, 글줄맞춤, 글자모양 순 으로 나타났다. 탈 네모를 글자로 구성된 본문을 사용한 실험2에서도 가장 중요한 요인은 글자크기였으나 두 번째 요인은 글자간격으로 나타났다. 이는 글자제작원리의 차이 및 탈 네모틀 글자에 대한 비 친숙성을 반영해주는 결과이다. 글자넓이의 수준변화가 극심한 이준석과 진영선(1998)의 연구에서는‘글자넓이’가 가장 중요하게 나타난 것과는 달리, 일상적인 글자넓이를 조작한 본 연구에서는‘글자크기’가 가장 중요한 것으로 나타났으므로 교재나 책의 본문을 구성할 때 글자크기를 가장 먼저 고려하고, 네모 틀 본문의 경우에는 글줄간격, 글자넓이 등을, 탈 네모틀 본문의 경우에는 글자간격, 글줄간격 등을 고려하는 것이 바람직할 것이다.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제2호
• /
• pp.114-119
• /
• 2004

By Article two of a Japanese urban park low, it prescribes park facilities strictly, and one of the classifications includes 'path and plaza'. In addition, it is assumed that we divide several kinds different paths of width by size of the park in a path design of a park with a textbook of park design in a trunk line path, the main path, a vice-path or a branch path and design it. From such a thing, in the path of an urban park, a line consists straight of fixed width, and it is most that one pattern is considered to be. Therefore, in modem urban park, a path and division of a plaza are lucid explanation. It is rare that the historical parks which generally former daimyo gardens are shown later, and is used as a kind of an urban park width of the path where was particularly posted in a strolling garden in that is fixed, and width waits straight for even a line and waits, and, for this, there is. As a result, it is a path and the situation that are hard to be distinguished of a plaza. Although there are a difference of design and a difference of pavement materials in modem landscape space when We watch road surface constitution of the path that We did that will let you wait, in gross We are uniform, and it is it with a result to be poor in change nature. From such an observation, this consideration compared traditional landscape space and modem landscape space with path width about two points of road surface constitution through the trial that a graph analyzed the actual place data which measured into and lectured on an ideal method of a park path from this.

• 한국전자파학회논문지
• /
• 제19권1호
• /
• pp.54-60
• /
• 2008

본 논문에서는 결함 기저면 구조(DGS) 인버터를 이용하여 평행 결합 선로 대역 통과 필터를 설계하는 새로운 방법을 제안하였다. 이 방법은 전송선 인버터 구조의 필터 설계 시 높은 임피던스로 발생하는 선로 폭 제한 문제를 쉽게 해결할 수 있다. 제안한 방법과 기존 방법에 근거하여 13.3 %의 대역폭율을 갖는 대역 통과 필터가 설계 및 제작되었다. 두 필터의 측정 곁과는 비교적 잘 일치한다. 반면에 기존 필터에 비해 제안 필터 길이는 약 15 mm 축소되었고, 인버터 선로 폭은 2배 이상 확장되었다.

• 패션비즈니스
• /
• 제1권3호
• /
• pp.95-102
• /
• 1997

This study is aimed for men's jacket draft not only to other style but also helping for men's jacket fits for trend by presenting the course to get a style we want by adding to the partial drafty changes in existing pattern of men's formal jacket selected two kinds of men's jacket style fit for 1997 S/S trend. In this 1997 S/S trend, the trend I of the characteristic formal jacket is a style slim expressed over the basic formal wear, and trend II of the characteristic casual jacket appears to women's wear that roundly expressed by collar line of V-zone returened back by the shoulder line of jacket made of a big diagonal wrinkled line of X-style in front centered around a button of center front line. In this study, it called that the existing traditional formal jacket of men is a A style of jacket and jacket style I, II is a jacket B, C style. Jacket A, B, C style, a distingtion in draft that added to make form an oblique wrinkled line of the X-shaped-making artificially to the front button line sharply distinguished by eyes will be come out by control of front neck width over the back neck width. According to this, we shall be found that place of front neck point is a cardinal point in draft that will be added any changes in a style of jacket.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.42-48
• /
• 1988

MM(multimode) PWM(pulse width modulation) Suitable for high performance and harmonic effects minimization of VSI (voltabge source invertetr)-IM (induction motor)drive system is proposed. The approximated optimal, suboptimal and optimal PWM are implemented in the low frequency range, while square wave operation is realized in the hibh frequency range. The pulse width Modulator is capable of generating control signals to a transistorized inverter operating at about 1KHz. All functions except digital comparison have been implemented in softyware making the scheme economical, flexible and reliable. Pulse width modulator is built and tested experimentally. In order to confirm the effectiveness and the reliability of the theoretical proposition, this scheme is applied to 1Hp, Three phase IM. As results, it is concluded that the scheme of MM PWM is superior to other conventional switching scheme through the discussions or analysis carried out on the items such as line-to-line voltage, current and spectrum of current harmonic components observed at the output terminal of inverter, noise level of motor.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1280-1287
• /
• 2002

The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than $100{\mu}$ m. This paper describes the performance of powder blasting technique in micro-line grooving of glass and the effect of the number of nozzle scanning on the depth and width of line groove. Experimental results showed that increasing the no. of nozzle scanning resulted in the increase of depth and width in grooves. Increase of width which may cause several problems in the precision machining results from wear of mask film. Therefore, well-controlled masking process is the most important factor for micro machining of glass with accuracy.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.146-150
• /
• 2015

Steel is produced through the steel-making process with a desired shape by a rolling press. Scrap is removed according to the sheet edge to improve the quality of the product. This machine is called a side trimmer. This study aimed to develop a side trimmer for automatically changing the width of the trimming knife without line stopping. This machine consists of a housing opening device and a turning device. The measuring technologies of sheet width, trimming knife rotation angle, and knife gap for increasing the control accuracy. This experiment was conducted to evaluate the performance of the developed technologies. It was reduced by 10% compared with the operation time of the conventional method.

• International Journal of Contents
• /
• 제8권1호
• /
• pp.30-38
• /
• 2012

Text extraction and binarization are the important pre-processing steps for text recognition. The performance of text binarization strongly related to the accuracy of recognition stage. In our proposed method, the first stage based on line detection and shape feature analysis applied to locate the position of a business card and detect the shape from the complex environment. In the second stage, several local regions contained the possible text components are separated based on the projection histogram. In each local region, the pixels grouped into several connected components based on the connected component labeling and projection histogram. Then, classify each connect component into text region and reject the non-text region based on the feature information analysis such as size of connected component and stroke width estimation.

• 스마트미디어저널
• /
• 제1권4호
• /
• pp.27-34
• /
• 2012

In this paper, a novel text binarization is presented that can deal with some complex conditions, such as shadows, non-uniform illumination due to highlight or object projection, and messy backgrounds. To locate the target text region, a focus line is assumed to pass through a text region. Next, connected component analysis and stroke width estimation based on location information of the focus line is used to locate the bounding box of the text region, and each box of connected components. A series of classifications are applied to identify whether each CC(Connected component) is text or non-text. Also, a modified K-means clustering method based on an HCL color space is applied to reduce the color dimension. A text binarization procedure based on location of text component and seed color pixel is then used to generate the final result.

• Plant Resources
• /
• 제8권3호
• /
• pp.250-257
• /
• 2005

This study was performed to provide basic information of the development and breeding of new cultivars of Hibiscus syriacus L., which have more beautiful and diverse flowers. Morphological characteristics of the flowers and leaves, and genetic variation of the flowers color of two Jeoktanshim-line cultivars, Bulsae and Pyungsung, were crossed each other. The result of the cross between Bulsae and Pyungsung are as follows: Mean flower height and width were 5.35 cm and 7.69 cm, respectively. Mean length and width of petal were 5.43 cm and 3.80 cm respectively, and mean length and width of flower pistil were 4.67 cm and 0.44 cm, respectively. The flower color of all ten individuals was the color of the Jeoktanshim-line, and Pyungsung, and all flower type were I-c type.