• 제목/요약/키워드: Line-scan

검색결과 471건 처리시간 0.025초

상하의 의류 영상을 이용한 가상 의류 착의 시스템 (A Virtual Fitting System Using The Top and Bottom Image of Garment)

  • 최란;조창석
    • 한국멀티미디어학회논문지
    • /
    • 제15권7호
    • /
    • pp.941-950
    • /
    • 2012
  • 본 연구에서는 PC상에서 인체 3차원 데이터에 상하의 의류를 중첩 착의하는 가상 착의 시스템을 소개한다. 이를 위하여, 레이저 스캔 방식으로 얻은 인체 3차원 데이터와 의류 앞뒷면의 모습을 촬영하여 얻은 의류 디지털 데이터를 이용한다. 2차원의 앞뒷면 의류 디지털 데이터에는 의류 소재 내 질점 간의 장력이 반영되었고, 인체 데이터에의 착의 과정에는 마찰력과 중력을 적용해 주었다. 하의 착용 시에는 마찰력과 중력에 추가적으로 혁대 개념을 도입하여 흘러내리는 의류를 고정하였고, 하의를 착의한 인체데이터위에 상의를 착의하는 중첩 착의 방법을 제시하였다. 본 시스템이 지닌 장점은 복잡한 패턴을 이용하여 착의하는 다른 연구와 달리, 의류의 앞뒷면만을 이용하여 착의하면서도 현실감은 뒤지지 않는다는 것에 있다. 현재 의류전자상거래 시 의류의 앞뒷면만을 전시하여 판매하는 방법과 유사한 방식으로 온라인 판매가 이루어지나, 착의 모습을 제공할 수 없는 기존 방식과 달리 3차원의 착의 모습까지 제공하게 되어, 의류 판매의 방식을 바꾸게 할 것으로 기대한다.

Fusarium mangiferae as New Cell Factories for Producing Silver Nanoparticles

  • Hamzah, Haider M.;Salah, Reyam F.;Maroof, Mohammed N.
    • Journal of Microbiology and Biotechnology
    • /
    • 제28권10호
    • /
    • pp.1654-1663
    • /
    • 2018
  • Finding a safe and broad-spectrum medication is a goal of scientists, pharmacists, and physicians, but developing and fabricating the right medicine can be challenging. The current study describes the formation of silver nanoparticles (AgNPs) by Fusarium mangiferae. It involves the antibiofilm activity of the nanoparticles against Staphylococcus aureus. It also involves cytotoxic effect against mammalian cell lines. Well-dispersed nanoparticles are formed by F. mangiferae. The sizes of the nanoparticles were found to range from 25 to 52 nm, and UV-Vis scan showed absorption around 416-420 nm. SEM, TEM, and AFM results displayed spherical and oval shapes. Furthermore, the FTIR histogram detected amide I and amide II compounds responsible for the stability of AgNPs in an aqueous solution. AgNPs were observed to decrease the formation of biofilm at 75% (v/v). DNA reducing, smearing, and perhaps fragmentation were noticed after treating the bacterial cells with 50% (v/v). Additionally, cell lysis was detected releasing proteins in the supernatant. It was also observed that the AgNPs have the ability to cause 59% cervical cancer cell line (HeLa) deaths at 25% (v/v), however, they showed about 31% toxicity against rat embryo fibroblast transformed cell lines (REF). The results of this study prove the efficiency of AgNPs as an antibiofilm against S. aureus, suggesting that AgNPs could be an alternative to antibiotics. It must also be emphasized that AgNPs displayed cytotoxic behavior against mammalian cell lines. Further studies are needed for assessing risk in relation to the possible benefit of prescribing AgNPs.

흉부 외상 환자에서 늑막 천자를 위해 바늘 도관의 길이에 대한 연구 (Study of the Length of Needle Thoracostomy Catheter Needed for Patients with Chest Trauma)

  • 강성원;류현욱;박정배;서강석;정제명
    • Journal of Trauma and Injury
    • /
    • 제22권1호
    • /
    • pp.1-4
    • /
    • 2009
  • Purpose: This study was conducted to evaluate the length of the catheter used in a needle thoracostomy for emergency decompression of a tension pneumothorax by measuring the chest wall thickness (CWT) in patients with chest trauma Methods: A retrospective review of 201 patients with chest trauma who had been transported the emergency department in a tertiary university hospital in a metropolitan area between 1 January and 31 February 2007 was performed. The average CWT at the second intercostal space (ICS) in the midclavicular line (MCL) was measured by using a chest computed tomography scan. Results: As the left and the right mean CWTs were $3.4{\pm}1.0cm$ and $3.4{\pm}1.0cm$, respectively, there was no significant statistical difference between them. The mean CWT of female patients was significantly higher than that of male patients (p=0.001). The mean CWT of patients under the age of 65 years was significantly thicker than that of the patients over the age of 65 years (p<0.001). Of the studied patients, 12 (6.0%) a CWT > 5 cm. Conclusion: A 5 cm-length catheter in a needle thoracostomy may be insufficient for emergency decompression of a tension pneumothorax, so a catheter longer than 5 cm in length is needed.

Measurements of Two-dimensional Gratings Using a Metrological Atomic Force Microscope with Uncertainty Evaluation

  • Kim, Jong-Ahn;Kim, Jae-Wan;Kang, Chu-Shik;Eom, Tae-Bong
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제9권2호
    • /
    • pp.18-22
    • /
    • 2008
  • The pitch and orthogonality of two-dimensional (2-D) gratings were measured using a metrological atomic force microscope (MAFM), and the measurement uncertainty was analyzed. Gratings are typical standard devices for the calibration of precision microscopes, Since the magnification and orthogonality in two perpendicular axes of microscopes can be calibrated simultaneously using 2-D gratings, it is important to certify the pitch and orthogonality of such gratings accurately for nanometrology. In the measurement of 2-D gratings, the MAFM can be used effectively for its nanometric resolution and uncertainty, but a new measurement scheme is required to overcome limitations such as thermal drift and slow scan speed. Two types of 2-D gratings with nominal pitches of 300 and 1000 nm were measured using line scans to determine the pitch measurement in each direction. The expanded uncertainties (k = 2) of the measured pitch values were less than 0.2 and 0.4 nm for each specimen, and the measured orthogonality values were less than $0.09^{\circ}$ and $0.05^{\circ}$, respectively. The experimental results measured using the MAFM and optical diffractometer agreed closely within the expanded uncertainty of the MAFM. We also propose an additional scheme for measuring 2-D gratings to increase the accuracy of calculated peak positions, which will be the subject of future study.

LNG 저장탱크용 9% Ni강 용접부의 저온피로균열진전 특성 (Fatigue Crack Growth Characteristics of 9% Ni Steel Welded Joint for LNG Storage Tank at Low Temperature)

  • 김재훈;심규택;김영균;안병욱
    • Journal of Welding and Joining
    • /
    • 제28권5호
    • /
    • pp.45-50
    • /
    • 2010
  • The fatigue crack growth characteristics of base metal and weld joint of 9% Ni steel for LNG storage tank was carried out using CT specimen at room temperature and $-162^{\circ}C$. Fatigue crack growth rate of base and weld metals at RT and $-162^{\circ}C$ was coincided with a single line independent of the change of stress ratio and temperature. In the region of lower stress intensity factor range, fatigue crack growth rate at $-162^{\circ}C$ was slower than that at RT, and the slop of fatigue crack growth rate at $-162^{\circ}C$ increased sharply with propagating of fatigue crack, fatigue crack growth rate at RT and $-162^{\circ}C$ was intersected near the region of $2{\times}10-4\;mm$/cycle, and after the intersection region, fatigue crack growth rate at $-162^{\circ}C$ was faster than that at RT. The micro-fracture mechanism using SEM shows the ductile striation in the stable crack growth region. Also the defects of weld specimen after fatigue testing were detected using the A scan of ultrasonic apparatus.

3D Body Scanning Data를 활용한 중년 남성용 슬림 핏(Slim-fit) 드레스 셔츠 바디스 패턴개발연구 (Bodice Pattern Development of the Slim-fit Dress Shirt for Middle-aged Males Using 3D Body Scanning Data)

  • 서추연
    • 한국의류학회지
    • /
    • 제40권1호
    • /
    • pp.171-187
    • /
    • 2016
  • The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

얼굴스캐너를 활용한 안면형상 영상진단기의 기초 연구 (Basic Study on the Image Instrument of the Facial-form by the 3D-facial Scanner)

  • 김경철;이정원;김훈;신순식;이해웅;이용태;지규용;김종원
    • 동의생리병리학회지
    • /
    • 제22권2호
    • /
    • pp.497-501
    • /
    • 2008
  • 3D facial scanner for an accurate analysis is measured precisely a distance in straight, a distance in curved line, an angle in 3D data, the area of surface. We can easy acquire 3D data by the method of 0.8sec in each scan with easy handling, simple merge to whole face, harmless and fast process. In the HyungSang medicine, the inspection of the facial shape includes the Dam(gall bladder) - Bang Kwang(urinary bladder) body, the Jung${\cdot}$Gi${\cdot}$Shin${\cdot}$Hyul, the six merdian types etc. And we will collect the evidence based date verifing in the HyungSang clinical medicine. As we will analyze the facial whole form and the size${\cdot}$length${\cdot}$angle of the facial part, put the facial form's standardization on a solid foundation.

Brain Injuries during Intraoperative Ventriculostomy in the Aneurysmal Subarachnoid Hemorrhage Patients

  • Moon, Hyung-Ho;Kim, Jae-Hoon;Kang, Hee-In;Moon, Byung-Gwan;Lee, Seung-Jin;Kim, Joo-Seung
    • Journal of Korean Neurosurgical Society
    • /
    • 제46권3호
    • /
    • pp.215-220
    • /
    • 2009
  • Objective : Intraoperative ventriculostomy is widely adopted to make the slack brain. However, there are few reports about hemorrhagic or parenchymal injuries after ventriculostomy. We tried to analyze and investigate the incidence of these complications in a consecutive series of patients with aneurysmal subarachnoid hemorrhage (SAH). Methods : From September 2006 to June 2007, 43 patients underwent surgical clipping for aneurysmal SAH at our hospital. Among 43 patients, we investigated hemorrhagic or parenchymal injuries after intraoperative ventriculostomy using postoperative computed tomographic scan in 26 patients. After standard pterional craniotomy, ventriculostomy catheter was inserted perpendicular to the cortical surface along the bisectional imaginary line from Paine's point. Results : Hemorrhagic injuries were detected in 12 of 26 patients (46.2%). Mean systolic blood pressure during anesthesia was with in statistically significant parameter related to hemorrhage (p=0.006). On the other hand, parenchymal injuries were detected in 11 of 26 patients (42.3%). Female and the amount of infused mannitol during anesthesia showed statistically significant parameters related to parenchymal injury (p=0.005, 0.04, respectively). However, there were no ventriculostomy-related severe complications. Conclusion : In our series, hemorrhagic or parenchymal injuries after intraoperative ventriculostomy occurred more commonly than previously reported series in aneurysmal SAH patients. Although the clinical outcomes of complications are generally favorable, neurosurgeon must keep in mind the frequent occurrence of brain injury after intraoperative ventriculostomy in the acute stage of aneurysmal SAH.

창녕 화왕산성 출토 비격진천뢰(飛擊震天雷)의 보존 (Conservation of the Metal ball fired by a cannon)

  • 곽홍인;황정순;유혜선;정광룡
    • 박물관보존과학
    • /
    • 제7권
    • /
    • pp.25-31
    • /
    • 2006
  • 경남 창녕군 화왕산성에서 발굴된 비격진천뢰의 보존처리를 실시하였다. 비격진천뢰는 일부 결실된 상태였다. 단, 결실된 부분은 내부를 관찰할 수 있도록 복원처리를 실시하지 않았다. X-선 투과검사 및 C.T(Computed Tomography)촬영 결과 주조과정에서 주형선 주위에 기공이 많이 발생한 것을 확인할 수 있었고, 표면에는 주조시 내범을 유지하기 위한 형지공이 확인되었으며, 이 부분에 다시 철판을 덧대어 보강한 흔적도 확인할 수 있었다. 표면에 존재하는 청색 부식물의 주성분은 SEM/EDS 분석결과 산소(O), 철(Fe), 인(P), 규소(Si), 알루미늄(Al)이라는 것을 확인하였으며, XRD 분석결과 청색 부식물은 비비아나이트[vivianite, Fe3(PO4)2·8H2O]로 확인되었다. 그리고 미세조직 분석결과 전형적인 회주철조직으로 판명되었다.

Use of hybrid materials in the trace determination of As(V) from aqueous solutions: An electrochemical study

  • Tiwari, Diwakar;Jamsheera, A.;Zirlianngura, Zirlianngura;Lee, Seung Mok
    • Environmental Engineering Research
    • /
    • 제22권2호
    • /
    • pp.186-192
    • /
    • 2017
  • The carbon paste electrode (CPE) was modified with the pristine bentonite and hybrid material (HDTMA-modified bentonite). The modified-CPEs are then employed as working electrode in an electrochemical detection of As(V) from aqueous solutions using the cyclic voltammetric measurements. Cyclic voltammograms revealed that As(V) showed reversible behavior onto the working electrode. The hybrid material-modified carbon paste electrode showed significantly enhanced electrochemical signal which was then utilized in the low level detection of As(V). Moreover, the studies were conducted at neutral pH conditions. The electrochemical studies were conducted with scan rates (20 to 200 mV/s) to deduce the mechanism of redox processes involved at the electrode surface. The anodic current was linearly increased, increasing the concentration of As(V) from 5.0 to $35.0{\mu}g/g$ using the hybrid material-modified electrode. This provided fairly a good calibration line for As(V) detection. The presence of varied concentrations of As(III) in the determination of total arsenic was studied. The influence of several cations and anions viz., Cu(II), Mn(II), Zn(II), Pb(II), Cd(II), Fe(III), $Cl^-$, $NO_3{^-}$, $PO_4{^{3-}}$, EDTA and glycine in the detection of As(V) from aqueous solution was also studied. Further, in an attempt to simulate the real matrix analysis, the tap water sample was spiked with As(V) and subjected for As(V) detection using the modified-CPE.