• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2010

Using 3D point data implemented from terrestrial LiDAR, this research has modelled geospatial data in 2 categories(gridded & un-gridded) and conducted LOS analysis experiment using outcome from the modeling exercise. To compare LOS analysis results from each of the 2 models in the above, maximum LOS (line of sight) range in the experimental area was specified as 30m in Area A, 40m in Area B and 50m in Area C and the time taken by LOS analysis and the number of visible points were measured. As for the LOS analysis experiment results, in comparison with the gridded model, the un-gridded model took about 3.9 times more time in Area A, 5.4 times in Area B and 6.5 times in Area C. In addition, about 0.97 times fewer points were measured in Area A, 0.93 times in Area B and 0.94 times in Area C. The difference between gridded model and un-gridded model in terms of the time taken by LOS analysis increased, as the maximum LOS range extended. On the other hand, the number visible points did not vary significantly in reference to the size of visible range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1210-1230
• /
• 1997

In this paper, we suggest an architecture of DS/CDMA tranceiver composed of one pilot channel used as reference and multiple traffic channels. The pilot channel-an unmodulated PN code-is used as the reference signal for synchronization of PN code and data demondulation. The coherent demodulation architecture is also exploited for the reverse link as well as for the forward link. Here are the characteristics of the suggested DS/CDMA system. First, we suggest an interlaced quadrature spreading(IQS) method. In this method, the PN coe for I-phase 1st channel is used for Q-phase 2nd channels and the PN code for Q-phase 1st channel is used for I-phase 2nd channel, and so on-which is quite different from the eisting spreading schemes of DS/CDMA systems, such as IS-95 digital CDMA cellular or W-CDMA for PCS. By doing IQS spreading, we can drastically reduce the zero crossing rate of the RF signals. Second, we introduce an adaptive threshold setting for the synchronization of PN code, an initial acquistion method that uses a single PN code generator and reduces the acquistion time by a half compared the existing ones, and exploit the state machines to reduce the reacquistion time Third, various kinds of functions, such as automatic frequency control(AFC), automatic level control(ALC), bit-error-rate(BER) estimator, and spectral shaping for reducing the adjacent channel interference, are introduced to improve the system performance. Fourth, we designed and implemented the DS/CDMA MODEM to be used for variable transmission rate applications-from 16Kbps to 1.024Mbps. We developed and confirmed the DS/CDMA MODEM architecture through mathematical analysis and various kind of simulations. The ASIC design was done using VHDL coding and synthesis. To cope with several different kinds of applications, we developed transmitter and receiver ASICs separately. While a single transmitter or receiver ASC contains three channels (one for the pilot and the others for the traffic channels), by combining several transmitter ASICs, we can expand the number of channels up to 64. The ASICs are now under use for implementing a line-of-sight (LOS) radio equipment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.12-25
• /
• 2016

In this study, in order to facilitate analysis in a continuous sequence, including the concept of the landscape experience time, countless frames of a continuous landscape were extracted. The amount of visual elements in each frame was data-converted numerically to take advantage of the quantitative data necessary for landscape planning and design was calculated in the rhythm of the sequence. In Order to shoot video with the flow of the line of sight of experience in landscape districts and landscape control points along the landscape corridor which is a continuous path, each of the corresponding computer motion techniques. This study developed a CRVP Koo computer program to effectively calculate the continuous visual number of specific landscape components by extracting uncounted frames at regular intervals, and after verifying, attempting to apply this to the target site. Through the applied result, it was possible to extract the digitized quantitative rhythm for each component of each landscape, the margin of error is very small when compared with the results of manual in photoshop, it was able to overcome the drawbacks of the manual. Using the rhythm of the derived sequence, and those close to the experience of the landscape, it was possible to achieve quantitative analysis derived from a variety of perspectives as well as was possible to be used as quantitative basis data and analysis technique for landscape planning and design.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.307-313
• /
• 2022

As the development of renewable energy expands internationally to cope with global warming and climate change, the share of wind power generation has been gradually increasing. Although wind farms can produce electric power for 24 h a day compared to solar power plants, Their interfere with the operation of nearby radars or communication equipment must be analyzed because large-scale wind power turbines are installed. This study analyzed whether a land radio station can receive sufficient signals when a ship sailing outside the offshore wind farm transmits distress signals on the VHF band. Based on the geographic information system digital map around the target area, wind turbine CAD model, and wind farm layout, the area of interest and wind farm were modeled to enable numerical analysis. Among the high frequency analysis techniques suitable for radio wave analysis in a wide area, a dedicated program applying physical optics (PO) and shooting and bouncing ray (SBR) techniques were used. Consequently, the land radio station could receive the electromagnetic field above the threshold of the VHF receiver when a ship outside the offshore wind farm transmitted a distress communication signal. When the line of sight between the ships and the land station are completely blocked, the strength of the received field decreases, but it is still above the threshold. Hence, although a wind farm is a huge complex, a land station can receive the electromagnetic field from the ship's VHF transmitter because the wave length of the VHF band is sufficiently long to have effects such as diffraction or reflection.

• Korean Institute of Interior Design Journal
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2016

This study has estimated the traits of conscious eye moving with the objects of the halls of subway stations. For that estimation, the observation data from eye-tracking were matched with the experiment images, while an independent program was produced and utilized for the analysis of the eye moving in the selected sections, which could provide the ground for clarifying the traits of space-users' eye moving. The outcomes can be defines as the followings. First, The application of the independently produced program provides the method for coding the great amount of observation data, which cut down a lot of analysis time for finding out the traits of conscious eye moving. Accordingly, the inclusion of eye's intentionality in the method for extracting the characteristics of eye moving enabled the features of entrance and exit of particular objects with the course of observing time to be organized. Second, The examination of eye moving at each area surrounding the object factors showed that [out]${\rightarrow}$[in], which the line of sight is from the surround area to the objects, characteristically moved from the left-top (Area I) of the selected object to the object while [in]${\rightarrow}$[out], which is from the inside of the object to the outside, also moved to the left-top (Area I). Overall, there were much eye moving from the tops of right and left (Area I, II) to the object, but the eye moving to the outside was found to move to the left-top (Area I), the right-middle (Area IV) and the right-top (Area II). Third, In order to find if there was any intense eye-moving toward a particular factor, the dominant standards were presented for analysis, which showed that there was much eye-moving from the tops (Area I, II) to the sections of 1 and 2. While the eye-moving of [in] was [I $I{\rightarrow}A$](23.0%), [$I{\rightarrow}B$](16.1%) and [$II{\rightarrow}B$](13.8%), that of [out] was [$A{\rightarrow}I$](14.8%), [$B{\rightarrow}I$](13.6%), [$A{\rightarrow}II$](11.4%), [$B{\rightarrow}IV$](11.4%) and [$B{\rightarrow}II$](10.2%). Though the eye-moving toward objects took place in specific directions (areas), that (out) from the objects to the outside was found to be dispersed widely to different areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.819-830
• /
• 2017

An FM radio based PCL system is a passive radar technique for detecting the multiple moving targets from FM radio signals and tracking the trajectories of the targets by calculating the cross-correlation function of direct-path signal and target echo signals. However, the interference signals are received from a surveillance channel, which is designed to receive the target echo signals. Because of this problem, the target echo signals are masked by the strong interference signals and this makes it difficult to detect the true targets from the cross-correlation function. Adaptive filters are known as effective methods for suppressing the interference signals but there is a problem to present their accurate performances in the PCL system because many literatures used the cross-correlation function and the ratio of input and output power as a measure of the performance analysis. In this paper, a performance analysis method is proposed to evaluate the performance of interference cancellation algorithms. By using the property that each component of the filter weight vector is adjusted to suppress the specific interference signal, a performance measure of the interference signal suppression is defined by a function of adaptive filter weights. Based on the proposed method, we compare the performance of the adaptive filters used in the PCL system. Simulation results show that the proposed method can be very effective for evaluating the performance of interference cancellation algorithms.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.403-413
• /
• 2021

Background and objective: There is growing concern about the effects of modern society on mental health, coming with Covid-19-related caveats on depression, anxiety, and stress (DAS). This can be a subject to provide alternative methods which alleviate DAS. In line with this context, sensory gardens are widely acknowledged to stimulate the five major senses (sight, sound, taste, touch, and smell) and can have a significant (positive) impact on mental health. However, there is limited empirical evidence on the effect of these gardens with regard to alleviating DAS - particularly with respect to urban society This is a gab in knowledge how such limits can be addressed. Accordingly, this present study is clearly needed in order to verify if there are any correlations between sensory gardens and (positive) effects on DAS. The aim of this study was therefore to understand current levels of DAS in a high density building with a sensory garden in a courtyard and determine correlations between experiences in the sensory courtyard and levels of DAS. Methods: The Depression Anxiety and Stress Scale (DASS-21) was employed to test the level of DAS. Results: Additionally, 13 different factors associated with experiences in the building, including the stimulation of the five major senses in the sensory courtyard, were measured to reveal their contribution to mitigating depression, anxiety, and stress. It is noted that the average levels of DAS were 7.91, 7.77 and 9.01 respectively indicating that the mental health of participants requires mental health management. However, results show that factors associated with the sensory courtyard could improve mental health. For example, new social relationships, walking with colleagues, and the stimulation of each of the five major senses in the sensory garden could improve DAS. Conclusion: This illustrates that external experiences are more effective at mitigating depression, anxiety, and stress than internal ones. Factor analysis revealed four components: stimulating the five senses; internal and external facilities; internet-based device use; and new social relationships. There was a strong positive correlation between new social relationships and walking with colleagues. There were also strong positive correlations among the stimulation of each of the five senses. In conclusion, there are strong indications that sensory courtyards can help alleviate DAS and should therefore be promoted, particularly in the current Covid-19 situation wherein the physical and mental health of the public at large are threatened. Accordingly, courtyard design should be rethought in light of the relationship between the positive impact of sensory gardens and mental health.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.163-181
• /
• 2023

Improving the detection performance of facilities corresponding to the sensors of autonomous vehicles helps driving safety. In the road and transportation field, research is being conducted to improve the detection performance of sensors by road infrastructure or facilities. As part of this on the development of autonomous driving support infrastructure, the shape of traffic cones and drums to ensure sufficient LiDAR detection performance even rainy conditions and maintain the line-of-sight guidance function in construction zones improvement effect. The principle was to increase reflection performance and ensure no significant difference in shape from existing facilities. Traffic cones were manufactured in square pyramid shapes instead of cones, and drums were manufactured in hexagonal and octagonal pillar shapes instead of cylinders. LiDAR detection data for the facility was confirmed on a clear day and with 20 mm/h and 40 mm/h rainfall. The detection performance of the square pyramid-shaped traffic cone and octagonal column-shaped drum was to the existing facility. On the other hand, deviations occurred due to repeated measurements, and significance could not be confirmed through statistical analysis. By reflecting these results, future studies will seek a form in which data can be obtained uniformly despite the diversity of measurement environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.86-94
• /
• 2009

Currently, positioning methods for LBS(Location Based Service) are GPS and network-based positioning techniques that use mobile communication networks. In these methods, however, the accuracy of positioning decreases due to the propagation delay caused by the non-line-of-sight(NLOS) effect and the repeater. To address this disadvantage, the CDMA system uses Pattern Matching algorithm. The Pattern Matching algorithm constructs a database of the propagation characteristics of the RF signals measured during the GPS positioning along with the positioned locations, so that the location can be provided by comparing the propagation characteristics of the received signals and the database, upon a user's request. In the area where GPS signals are not received, however, a database cannot be constructed. There are problem that the accuracy of positioning decreases due to the area without a database Because Pattern Matching algorithm depend on database existence. Therefore, this paper proposed a pilot signal strength prediction algorithm to enable construction of databases for areas without databases, so as to improve the performance of the Pattern Matching algorithm. The database was constructed by predicting the pilot signals in the area without a database using the proposed algorithm, and the Pattern Matching algorithm analysed positioning performance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.325-332
• /
• 2022

Determination of VLBI IVP (Very Long Baseline Interferometry Invariant Point) position with high accuracy is required to compute local tie vectors between the space geodetic techniques. In general, reflective targets are attached on VLBI antenna and slant distances, horizontal and vertical angles are measured from the pillars. Then, adjustment computation is performed by using the mathematical model which connects measurements and unknown parameters. This indicates that the accuracy of the estimated solutions is affected by the accuracy of the measurements. One of issues in local tie surveying, however, is that the reflective targets are not in favorable condition, that is, the reflective sheet target cannot be perfectly aligned to the instrument perpendicularly. Deviation from the line of sight of an instrument may cause different type of measurement errors. This inherent limitation may lead to incorrect stochastic modeling for the measurements in adjustment computation procedures. In this study, error characteristics by measurement types and pillars are analyzed, respectively. The analysis on the studentized residuals is performed after adjustment computation. The normality of the residuals is tested and then equal variance test between the measurement types are performed. The results show that there are differences in variance according to the measurement types. Differences in variance between distances and angle measurements are observed when F-test is performed for the measurements from each pillar. Therefore, more detailed stochastic modeling is required for optimal solutions, especially in local tie survey.