• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.141-143
• /
• 2004

This paper represents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employed the concept of self-consistency. We carry out the experiment of 3D line extraction using synthetic images generated from Avenches data set of Ascona aerial images.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.89-100
• /
• 2001

The major purpose of this study is to show exact and convenient devices and minimize error in body measurement. This study was referred to 13 records and compared 6 items that the investigator's opinion has been differed about anthropometric point and line and suggested convenient and radical device, and measured by if need be. The 30 students from 20 to 25 ages were measured and data was analyzed by mean, std. deviation and paired t-test. The results are as follows. 1. Side neck point has been suggested many devices, but was suggested in this study to decide by M. trapezius, cervicale point and fossa jugularis point. 2. Shoulder point was suggested to decide by point of 1/2 armhole depth, upper arm depth and shoulder depth except acromion point. 3. Waist circumference line has been differed between horizontal line and natural line. The result of measurements was no significant difference between two methods and natural line was convenience. Waist circumference line must considered two methods together for garment construction and somato type. 4. The standard of hip circumference line has been differed between buttock point and trochanterion point. The result of measurements was significant difference between two methods, but two point must considered together because of body type. 5. Chest circumference line at scye has been differed between horizontal line and natural line. The result of measurements was significant difference between two methods and natural line was convenience. Chest circumference line at scye must studied to decide method the line for garment construction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.965-967
• /
• 2000

An on-line FIA system in place of traditional Conway method was used for quicker and simpler analysis of volatile basic nitrogen of pork. The on-line system was developed by connecting an FIA apparatus with an ammonia electrode as a detector to a personal computer. The data from Conway method and from the on-line FIA system were in good agreement and the correlation coefficient was 0.981. One sample could be analyzed in about 4 min.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.114-120
• /
• 2008

This paper proposed the band pass filter(BPF) with feeding structure using $\pi$-type transmission line by means of transforming the input/output coupled-lines of the half wavelength parallel coupled-line BPF into K-inverter, then substituting $\pi$-type transmission line equivalence for K-inverter. The proposed method supplies solution with what the half wavelength parallel coupled-line BPF's input/output coupled-lines are realized. Also it can quite reduce efforts and time needed to optimize filter performance when is compared to reported method using tapped line structure because formulas is very simple and accurate. On the basic of the proposed method, the BPF with feeding structure using $\pi$-type transmission line has been designed and fabricated. The validity of proposed method was proven by the measured result.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.63-70
• /
• 1985

In this paper, the Unilateral Fin-line structure and the I-Plane structure are analysed by Rayleigh-Ritz variational method including the effect of conductor thickness. And a com-putcr-aided design program, CADUNI, is developed for microwave I-plane and Unilateral Fin-Line bandpass filters. Unilateral Fin-Line Filters are desigied at the center frequency of 10.5 GHz with guided bandwidth between 5% and 24.6%. Measured insertion loss is between 0.17 and 0.25 dB, and center frequency deviation is less than 0.2%. Experimental results are in good agree-ment with theory.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.3 no.3
• /
• pp.35-39
• /
• 1980

Although the product line produces a large volume of goods in a relatively short time, once the product line is established there are numerous problems that arise in connection with this product line. One of these problems is the problem of balancing operations or stations in terms of equal times and in terms of the times required to meet the desered rate of production. The objective of line balancing is minimizing the idle time on the line for all combinations of work stations subject to certain restrictions. In general, there are two types of line-balancing situations : (1) assembly line balancing and (2) fabrication line balancing. Two approaches to the assembly line balancing problem have been used. The first assumes a filed cycle time and find the optimum number of work stations. The second approach to the assembly line balancing problem assumes the number of work stations to be fixed and systematically coverages on a solution which minimizes the total delay time by minimizing the cycle time. Here the cycle time is determined by the longest station time. In this paper, by using the second approach method, a general mathematical model, problem solutions, and computer program for the assembly line balancing problem is presented. Data used is obtained from the company which has been confronted with many problems arising in connection with their assembly line.

• Progress in Superconductivity and Cryogenics
• /
• v.2 no.2
• /
• pp.20-25
• /
• 2000

A CICC type superconducting bus-line electrically connecting a superconducting magnet to a power supply is cooled down to low temperature under the external magnetic field during operation. The thermal contraction during the cooling may be constrained by the supports which are installed to protect the bus-line from Lorenz magnetic forces. This constrained contraction causes thermal stresses in the bus-line to release thermal contraction. The minimum stress conditions in the bus-line may be optimized by controlling the supporting arrangement considering the thermal contraction and the external field. The analytical method to find optimal supports arrangement was suggested by using the beam theory, and numerical calculation using commercial code was performed to verify the suggested analytical optimization method.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1242-1244
• /
• 1999

AVR parameter tuning for voltage control of power system generators has generally been done with the open-circuit model of the synchronous generator. When the generator is connected on-line and operating at rated load conditions, the AVR operates in an entirely different environment from the open-circuit conditions. This paper describes a new method for AVR parameter tuning using optimization technique with on-line linearized system model. As this method considers not only the on-line models but also the off-line open-circuit models, AVR parameters tuned by this method can give the sufficiently stable performance at the open-circuit commissioning phase and give the desired performance at the operating conditions. Also this method estimates the optimum parameters for desired performance indices that are chosen for satisfying requirements in some practical applications, the performance of the AVR can satisfy the various requirements.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.31-38
• /
• 2003

Line heating is an effective and economical process for forming flat metal plates into three-dimensional shapes for plating of ships. Because the nature of the line heating process is a transient thermal process, followed by a thermo elastic plastic stress field, predicting deformed shapes of plate is very difficult and complex problem. In this paper, neural network model o3r solving the inverse problem of metal forming is proposed. The backpropagation neural network systems for determining line-heating positions from object shape of plate are reported in this paper. Two cases of the network are constructed-the first case has 18 lines which have different positions and directions and the second case has 10 parallel heating lines. The input data are vertical displacements of plate and the output data are selected heating lines. The train sets of neural network are obtained by using an analytical solution that predicts plate deformations in line heating process. This method shows the feasibility that the neural network can be used to determine the heating-line positions in line heating process.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.262-270
• /
• 2013

A boundary protection method for power distribution line based on equivalent boundary effect is presented in this paper. In the proposed scheme, the equivalent resonance component with a certain central frequency is sleeve-mounted at the beginning of protected zone. The 'Line Boundary' is built by using boundary effect, which is created by introducing impedance in the primary-side of line. The 'Line Boundary' is significantly different from line wave impedance. Therefore, the boundary protection principle can be applied to power distribution line without line traps. To analyze the frequency characteristic corresponding to traveling-waves of introducing impedance in the primary-side of line, distributed parameters model of equivalent resonance component is established. The results of PSCAD/EMTDC simulation prove the obvious difference of voltage high frequency component between internal faults and external faults due to equivalent resonance component, and validate the scheme.