• 대한수의학회지
• /
• 제45권3호
• /
• pp.359-367
• /
• 2005

This study was carried out to understand the contamination patterns of Listeria in pork processing plants. A total of 402 samples were collected from carcass, pork during processing, surfaces of equipment and environment, and 238 isolates of Listeria species were identified. L. innocua was found in 64.7% of the isolates, L. monocytogenes in 33.2%, and L. welshimeri in 2.1%. Random amplified polymorphic DNA (RAPD) analysis performed to investigate the origin and routes of Listeria contamination, showed 21 composite types of L. monocytogenes and 26 composite types of L. innocua. It was confirmed that Listeria contamination begins with contaminated incoming carcass and ever-present contaminants in the processing environments. The persistence and dissemination of the same strain of L. monocytogenes and L. innocua throughout the processing line revealed that the sanitation standard operating procedure should be implemented to minimize the risk of colonization in the workplace. Molecular subtyping of L. innocua allowed us to tracing the possibility of cross-contamination during processing.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권1호
• /
• pp.206-217
• /
• 2001

The purpose of this study was to estimate that the relations of weathering speed and shear strength of granite soil by tracing the weathering depth of granite soil from the very moment of its cutting. The results obtained this follows ; 1) The relationships among Nc, Li and CEC, Li>6%, CEC>14 corresponds to Nc=2~30, and 4%${\phi}$)increases at a standard pressure. 3) And Nc=0~50 corresponds to $27{\sim}50^{\circ}$ of internal fiction angle and to 12~49kPa of cohesion. That is to say, internal friction angle(${\phi}$)corresponds better than cohesion(c). In conclusion, this study suggests that in simplified dynamic cone penetration test a penetration boundary line of 5 centimeters is decided at around Li=4%, CEC=3(meq/100g) which is classified as a completely weathering soil. It also appears that CEC increases as Li increases while Nc decreases.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.31-37
• /
• 1982

Developing a minimum wave resistance hull form which is satisfying the given requirements such as displacement and speed is one of the important problems in ship hydrodynamics. The theoretical approach conducted by Pien was successful in developing an optimized hull form, however, which can not be applied directly to practical hull form without manual lines fairing process. To avoid this difficulty, source distribution which arrived after the optimization was put into a fictitious restricted channel and as a result practicably modified hull form was derived by stream line tracing. The wave resistance of the hull thus obtained was calculated by solving the simplified integral equation suggested by Kan. The resistance at design point is almost same with that of the original hull which was represented by source distribution on the vertical rectangular center plane. It is therefore recommended to use the derived hull form for the hull which obtained after manual lines fairing process at Pienoid method. Further researches both in theory and experiment are necessary before this concept is put into practical application.

• 천문학회보
• /
• 제36권1호
• /
• pp.82.1-82.1
• /
• 2011

We present a new code for solving non-LTE radiative transfer problems in a general grid (RIG). RIG develops from RATRAN code (Hogerheijde & van der Tak 2000) using the Accelerated Monte-Carlo method, and it can cope with line overlap effect among multiple molecular and atomic species. In this algorithm we make grids in arbitrary coordinates adequate to the problem, but, on the other hand, photons propagate in the Cartesian coordinates. For spherical, cylindrical and other well defined coordinate, the problem of tracing photon's path reduces to solving simple quadratic equations. For example, the outflow in the star formation have high dynamic range in scales from a few AU to ~ 0.1 pc and have also cylindrical symmetry. So, we have used (r, ${\alpha}$) coordinate system, where r is the distance from the origin and ${\alpha}$ is z/ R2 in the cylindrical coordinate of (R,z). The (r, ${\alpha}$) coordinate realizes the density - power function of r - and temperature distributions of the problems with smaller numbers of grid than the cylindrical coordinate does, and the former consumes less time to solve the problems than the latter.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.90-96
• /
• 2021

In this study, the method of determining the state of grid points in the adaptable surface particle method based on grid system developed as a free-surface tracing method was improved. The adaptable surface particle method is a method of determining the state of the grid point according to the shape of the free-surface and obtaining the intersection of the given free-surface and grid line where the state of the grid point changes. It is difficult to determine the state of grid points in the event of rapid flow, such as collision or separation of free-surfaces, and this study suggests a method for determining the state of current grid points using the state of surrounding grid points where the state of grid point are known. A grid layer value was assigned sequentially to a grid away from the free-surface, centering on the boundary cell where the free-surface exists, to identify the connection information that the grid was separated from the free-surface, and to determine the state of the grid point sequentially from a grid away from the free-surface to a grid close to the free-surface. To verify the improved method, a numerical analysis was made on the problem of dam break in which a sudden collision of free-surface occurred and the results were compared, and the results were relatively reasonable.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2021년도 제63차 동계학술대회논문집 29권1호
• /
• pp.155-156
• /
• 2021

본 논문에서는 기존 산업 현장에서 사용되는 상용화된 전동 L 카트와는 다르게 안전사고가 발생할 확률이 낮고 작업 효율성을 상승시켜주기 위한 스마트 전동카드를 제안한다. 색상 감지 및 초음파 센서를 활용하여 안전사고 예방 기능이 적용된 라인트레이싱 기반의 자율 주행 기능 스마트 전동카트를 설계하였다. 설계한 시스템에 대한 시제품을 제작하였고 실제 실험을 통해 주행성능에 대해서 검증하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제29권4호
• /
• pp.225-228
• /
• 2006

목 적: 후족부의 병리학적 상태의 치료와 평가를 위해서는 관상면에서 종골과 경골이 연관된 배열상태의 정확한 평가가 필수적이다. 이전의 방사선학적 검사인 발과 발목의 전후방향, 측방향, 사방향 촬영과 종골 축방향 촬영 등의 X-선 촬영상은 관상면에서 종골과 경골이 연관된 배열상태를 증명하지 못했다. 이에 본 연구에서는 후족부 관상면 배열영상(hindfoot coronal alignment view)을 새롭게 소개하고자 한다. 검사방법 : 1) 양쪽 발을 지탱할 수 있는 방사선투과성의 스탠드형 보조기구를 제작한다. 2) 양측 발은 weight-bearing position이 되게 한다. 3) 각각의 발의 위치는 발의 종축이 보조기구 판과 수직이 되도록 자세를 유지한다. 4) silhouette tracing: 발뒷꿈치 outline과 둘째 발가락이 일직선상으로 지나도록 위치시킨다. 5) 중심 X-선: 발바닥 쪽을 향해 약 $15{\sim}20^{\circ}의 각도로 종골의 뒷쪽을 향해 입사한다. 결 과 : 1) 경골 축과 종골의 내측, 외측 결절의 영상이 함께 표출된다. 2) 종골이 회전되지 않아야 한다. 3) 거퇴관절강(talotibial joint space)이 함께 나타나야 한다. 결 론: CT나 MRI 영상에서도 관상면에서 후족부의 배열상태를 증명할 수 있지만, 환자의 체중이 주어지지 않기 때문에 발의 임상적인 증상을 보여주기에는 충분하지 못했다. 하지만 후족부 관상면 배열영상은 후족부의 inversion, eversion의 자세변화를 보여주고, 경골 원위부와 종골의 varus, valgus deformity의 치료를 위한 평가 자료로 좋은 검사방법이며, 비교적 자연스럽고 편안한 자세로 환자에게 큰 도움을 줄 것으로 사료된다.

• Imaging Science in Dentistry
• /
• 제34권1호
• /
• pp.31-34
• /
• 2004

Purpose: To compare the size of the masseter and lateral pterygoid muscle between the affected and the unaffected side of the patients who have the chief complaints of the mandibular asymmetry. Materials and Methods: Twenty two patients (male: 4, female: 18, average age: 21.3 year-old) were radiographed using posterior-anterior (P-A) cephalography and computed tomography (CT). On P-A cephalography, the degree of deviation was determined by the distance from the mentum to the vertical reference line through the crista galli and the anterior nasal spine. On the scanned tracing papers of the maximum cross-sectional area of the masseter and lateral pterygoid muscle using axial CT images, the pixel number was measured. The ratio of the affected : unaffected sides were obtained. For the masseter and lateral pterygoid muscle, the relationship between the muscular volume and degree of skeletal hypoplasia was studied. Results : The half cases showed no skeletal asymmetry. The lateral pterygoid muscle of the affected side was larger significantly than unaffected side (p<0.05). However, there was no significant difference between two sides in the cases of skeletal asymmetry. There was only significant difference in the cases without skeletal asymmetry (p<0.05). Conclusions : To some extent, the slight mandibular hypoplasia could affect the growth of some masticatory muscles.

• 천문학회보
• /
• 제40권1호
• /
• pp.67.4-68
• /
• 2015

We present a multi-wavelength observational study of a low-mass star-forming region, L1251-C, with observational results at wavelengths from the near-infrared to the millimeter. Spitzer Space Telescope observations confirmed that IRAS 22343+7501 is a small group of protostellar objects. The extended emission to east-west direction with its intensity peak at the center of L1251A has been detected at 350 and 850 mm with the CSO and JCMT telescopes, tracing dense envelope materials around L1251A. The single-dish data from the KVN and TRAO telescopes show inconsistencies between the intensity peaks of several molecular line emission and that of the continuum emission, suggesting complex distributions of molecular abundances around L1251A. The SMA interferometer data, however, show intensity peaks of CO 2-1 and $^{13}CO$ 2-1 located at the position of IRS 1, which is both the brightest source in IRAC image and the weakest source in the 1.3 mm dust continuum map. IRS 1 is the strongest candidate for being the driving source of a newly detected the compact CO 2-1 outflow. Over the whole region ($14^{\prime}{\times}14^{\prime}$) of L125l-C, 3 Class I and 16 Class II sources have been detected, including three YSOs in L1251A. A comparison with the average projected distance among 19 YSOs in L1251-C and that among 3 YSOs in L1251A suggests L1251-C is an example of low-mass cluster formation, where protostellar objects are forming in a small group.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.845-856
• /
• 2014

This study focused on the production and usability evaluation of smart outdoor jackets that are designed to provide convenience to middle-aged people by embedding devices for lighting and location tracing. The results were as follows. 1. Jacket power supplier was a assembled system composed of battery, charger, controller and switch. A solar cell was attached on the upper arm, and a wire type EL on the center line of a raglan sleeve along with a GPS on the left sleeve with a transparent vinyl pocket. The total weight of the jacket embedded with devices was 385-520g. 2. Operation of function, activity, acceptability, safety, convenience for device use, appearance, practical maintenance were selected based on an analysis of evaluation criteria of previous smart wear research. Criteria were narrowed to three major categories of satisfaction, appearance and maintenance. 3. Use satisfaction criterion consisted of wearable device functionality and physical, psychological use convenience. The evaluation indicated actual functionality. EL functions were especially effective and necessary. Convenience of use showed that a smart jacket was thought to be safe and the size was moderate regardless of age and gender. Outer appearance was satisfactory and respondents praised the color. The practical maintenance evaluation indicated that there was no challenge in doing the laundry since the solar battery and GPS were detachable. The practical use of smart outdoor jackets confirmed by fabric that was washable and dried quickly.