• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.141-143
• /
• 2004

This paper represents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employed the concept of self-consistency. We carry out the experiment of 3D line extraction using synthetic images generated from Avenches data set of Ascona aerial images.

• 전기전자학회논문지
• /
• 제13권2호
• /
• pp.181-185
• /
• 2009

In this paper, we are concerned with a 3D line segment extraction method by area-based stereo matching technique. The main idea is based on line fitting of elevation data on 2D line coordinates of ortho-image. Elevation data and ortho-image can be obtained by well-known area-based stereo matching technique. In order to use elevation in line fitting, the elevation itself should be reliable. To measure the reliability of elevation, in this paper, we employ the concept of self-consistency. We test the effectiveness of the proposed method with a quantitative accuracy analysis using synthetic images generated from Avenches data set of Ascona aerial images. Experimental results indicate that our method generates 3D line segments almost 7.5 times more accurate than raw elevations obtained by area-based method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.59-64
• /
• 2002

This paper presents a method for line segment extraction for 3-d building reconstruction. Building roofs are described as a set of planar polygonal patches, each of which is extracted by watershed-based image segmentation, line segment matching and coplanar grouping. Coplanar grouping and polygonal patch formation are performed per region by selecting 3-d line segments that are matched using epipolar geometry and flight information. The algorithm has been applied to high resolution aerial images and the results show accurate 3-d building reconstruction.

• International Journal of Advanced Culture Technology
• /
• 제6권4호
• /
• pp.317-322
• /
• 2018

We use edge detection technique for the input image to extract the entire edges of the object in the image and then select only the edges that construct the outline of the object. By examining the positional relation between these pixels composing the outline, a simplified version of the outline of the object in the input image is generated by removing unnecessary pixels while maintaining the condition of connection of the outline. For each pixel constituting the outline, its direction is calculated by examining the positional relation with the next pixel. Then, we group the consecutive pixels with same direction into one and then change them to a line segment instead of a point. Among those line segments composing the outline of the object, a line segment whose length is smaller than a predefined minimum length of acceptable line segment is removed by merging it into one of the adjacent line segments. As a result, an outline composed of line segments of over a certain length is obtained through this process.

• 한국멀티미디어학회논문지
• /
• 제17권6호
• /
• pp.655-670
• /
• 2014

In this paper, we propose an efficient and robust lane detection method for detecting immediate left and right lane boundaries of the lane in the roads. The proposed method are based on hyperbolic lane model and the reliable line segment clustering. The reliable line segment cluster is determined from the most probable cluster obtained from clustering line segments extracted by the efficient LSD algorithm. Experiments show that the proposed method works robustly against lanes with difficult environments such as ones with occlusions or with cast shadows in addition to ones with dashed lane marks, and that the proposed method performs better compared with other lane detection methods on an CMU/VASC lane dataset.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.174-179
• /
• 2005

This paper presents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employ the concept of self-consistency. We test the effectiveness of the proposed method with a quantitative accuracy analysis using synthetic images generated from Avenches data set of Ascona aerial images. Experimental results indicate that the proposed method shows average 30 line errors of .16 - .30 meters, which are about $10\%$ of the conventional area-based method.

• 한국지능시스템학회논문지
• /
• 제15권6호
• /
• pp.709-713
• /
• 2005

고해상도의 항공영상으로부터 3차원 와이어프레임(wire-frame) 구성을 위한 새로운 선소 추출 알고리듬을 제안하였다. 본 연구의 목적은 기존의 방식들의 문제점인 라인 불일치 문제, 에지부분의 Blurring 문제 등을 고려하여 보다 정밀하고 효과적인 선소를 추출하는데 있다. 먼저 항공영상으로부터 에지맵을 추출한 후, 에지 점들의 체인 코드 추적을 수행하고 에지강도와 방향성분을 고려한 선소의 추출을 행하였다. 에지맵의 추출은 Smith가 제안한 SUSAN(Smallest Univalue Segment Assimilating Nucleus) 알고리듬을 이용하였다. 제안한 알고리듬은 다음의 4 단계로 구성된다. 에지 맵의 체인코드 추적 결과에 기반하여 비선소 후보점을 감소시키기 위한 수평/수직/대각 성분 제거, 인접점 제거, 각도 일치점 제거, 선소를 이루는 시작점 및 끝점 검출 등의 과정을 통하여 선소추출을 행하였다. 제안한 알고리듬과 기존의 Boldt 알고리듬을 비교한 결과 제안한 알고리듬이 건물을 이루고 있는 주요 선소를 더욱 충실히 찾아냈고 불필요한 선소는 적게 찾아냄을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.40-43
• /
• 1997

This paper presents a 3D object recognition method for generation of 3D environmental map or obstacle recognition of mobile robots. An active light source projects a stripe pattern of light onto the object surface, while the camera observes the projected pattern from its offset point. The system consists of a laser unit and a camera on a pan/tilt device. The line segment in 2D camera image implies an object surface plane. The scaling, filtering, edge extraction, object extraction and line thinning are used for the enhancement of the light stripe image. We can get faithful depth informations of the object surface from the line segment interpretation. The performance of the proposed method has demonstrated in detail through the experiments for varies type objects. Experimental results show that the method has a good position accuracy, effectively eliminates optical noises in the image, greatly reduces memory requirement, and also greatly cut down the image processing time for the 3D object recognition compared to the conventional object recognition.

• 정보처리학회논문지B
• /
• 제9B권3호
• /
• pp.375-382
• /
• 2002

필기체 문자 인식은 온라인 필기체 문자 인식과 오프라인 필기체 문자 인식으로 나누어진다. 온라인 필기체 문자 인식은 타블렛과 같은 펜 기반의 전자식 입력 장치를 이용하여 필기의 순서와 획의 위치와 같은 동적인 필기 정보를 문자의 입력 시 획득할 수 있어 오프라인 필기체 문자 인식에 비해 큰 연구 성과를 이루었다. 그러나 오프라인 필기체 문자 인식은 온라인 필기체 문자 인식에서와 같이 동적인 정보를 입력받을 수 없고, 다양한 필기와 자소의 겹침이 심하며 획 사이의 잡영을 많이 가지고 있어 인식의 전처리 결과에 따라 인식 성능이 크게 달라진다. 본 논문에서는 오프라인 필기체 한글 문자 인식을 위해 문자의 동적인 정보를 포함하는 획을 효과적으로 추출하는 방법을 제안한다. 제안된 방법은 전처리 과정으로 먼저 Watershed 알고리즘을 이용하여 입력된 필기체 문자 영상의 향상 및 이진화를 수행한다. 이진화된 문자부를 변형된 Lu와 Wang의 세선화 알고리즘을 사용하여 세선화를 수행한 후 문자에서의 특징점을 추출하여 세그먼트 화소열을 추출하고, 최대 허용 오차법을 이용하여 벡터화한다. 벡터화의 수행으로 몇 개의 획이 하나의 세그먼트로 묶인 경우, 하나의 세그먼트 화소열은 2 또는 그 이상의 세그먼트 벡터로 분리된다. 추출된 세그먼트 벡터들을 완전한 획으로 재구성하기 위해서 오른손 필기 좌표계 시스템을 이용하여 벡터의 방향적인 성분을 인간의 필기 획의 방향에 알맞게 수정하고, 수정된 세그먼트 벡터의 방향성과 분기 정보를 이용하여 인접한 결합 가능한 세그먼트 벡터를 결합함으로써 문자 인식에 적합한 완전한 획으로 재구성한다. 실험 결과 제안된 방법이 필기체 한글 문자 인식에 적합함을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.176-180
• /
• 2003

The paper presents an efficient method of extracting line segment in a local map of a robot's surroundings. The local map is composed of 2-D grids that have both the occupancy and orientation probabilities using sonar sensors. To find the shape of an object in a local map from orientation information, the orientations are clustered into several groups according to their values. The line segment is , then, extracted from the clusters based on Hough transform. The proposed technique is illustrated by experiments in an indoor environment.