• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.141-143
• /
• 2015

본 연구는 해변의 양측에서 퇴적되고 해변 중앙에서 침식이 일어나고 있는 광안리 해수욕장에 최소 해빈폭을 최대로 하는 최적의 양빈 설계를 하고자 실시하였다. 광안리 해수욕장에 3가지 case의 양빈안을 수치 모의 시나리오로 구성하여 OneLine Shoreline Model을 적용하여 해빈폭의 시간적 변화를 모의하였으며, Cross-shore Profile Model을 적용하여 연평균 파고에 따른 전진폭과 최고 파고에 따른 침식폭을 추정하였다.

• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.68.1-68.1
• /
• 2015

Gravitational collapse is a dynamical process associated with star formation. One observational evidence of such infall motion is so called "blue asymmetry" profile, which is the optically thick line profile with the intensity peak skewed blueward relative to the intensity peak of optically thin lines. We analyzed both HCN J=1-0 and HNC J=1-0 line profiles to study the inflow motion in different evolutionary stages of massive star formation; Infrared dark clouds (IRDCs), High-mass protostellar object (HMPOs), and Ultra-compact HII regions (UCHIIs). The infall asymmetry in the HCN spectra seems to be more prevalent than the HNC spectra throughout all the three evolutionary phases. The prevalence of the blue profile in the HCN spectra is found in every evolutionary stage, with IRDCs showing the largest blue excess. In the case of the HNC spectra, only IRDCs show the blue excess statistically significant. These results suggest that HCN may be a better infall tracer in massive star forming region. In addition, even though the characteristics of the blue profile largely depend on the suitable combination of optical depth and critical density, our analyses also indicate that IRDCs may have the most active infall process compared to other evolutionary phases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1929-1939
• /
• 1999

This paper presents a neural network approach, which was named PRONET, to 3D object recognition and pose calculation. 3D objects are represented using a set of centroidal profile patterns that describe the boundary of the 2D views taken from evenly distributed view points. PRONET consists of the training stage and the execution stage. In the training stage, a three-layer feed-forward neural network is trained with the centroidal profile patterns using an error back-propagation method. In the execution stage, by matching a centroidal profile pattern of the given image with the best fitting centroidal profile pattern using the neural network, the identity and approximate orientation of the real object, such as a workpiece in arbitrary pose, are obtained. In the matching procedure, line-to-line correspondence between image features and 3D CAD features are also obtained. An iterative model posing method then calculates the more exact pose of the object based on initial orientation and correspondence.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.191-213
• /
• 1984

This study was made on the facial profile of the normal Korean children using the roentgenographic cephalograms. The subjects consisted 51 males and 47 females children of primary dentition with the normal occlusion and acceptable profile. For this study 13 soft tissue profile landmarks were plotted and 14 liner length, 9 soft tissue thickness, 8 vertical height length, 12 angles of soft tissue profile, and 2 vertical proportion were measured. The mean and standard deviations in the subjects were calculated and compared between male and female. The following results were obtained : 1. By the significant test, total facial convexity angle and soft tissue thickness were no significant difference between both sexes. 2. Lower facial height was greater than upper facial height in both sexes. 3. The vertical length of the upper and lower lips were 21.95 mm, 40.74 mm in male and 21.62 mm, 39.63 mm in female. 4. In the relationship of the upper lip and lower lip to the Ricketts' esthetic line, the male was 1.3 mm, 1.18 mm and the female was 1.16 mm, 1.27 mm front of the esthetic line. 5. Compared with the angulation of flush terminal plane group and mesial step group, the mesial step group was greater than the flush terminal plane group except the chin angle.

• Tribology and Lubricants
• /
• v.29 no.6
• /
• pp.353-359
• /
• 2013

The rollers and/or races in cylindrical and tapered roller bearings should be profiled to relieve high edge stress concentrations caused by their finite lengths and misalignment. In this study, a numerical analysis was performed to investigate the elastohydrodynamic lubrication (EHL) of a Lundberg profile-type cylindrical roller. A finite difference method with fully nonuniform grids and the Newton-Raphson method were used to present detailed EHL pressure distributions and film shapes, as well as the variations in the minimum and central film thicknesses with the profile modification coefficient. In the Lundberg profile, the maximum pressure and minimum film thickness always occurred near the edges. Proper modification of the Lundberg profile considerably increased the minimum film thickness.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.245-258
• /
• 1997

Cephalometric radiographs, frontal photographs and profile silhouette phogographs of 68 young adult female who were model or were recommended to have esthetic face were used in this study. 7 Students in department of Art of Kyungpook national university and 15 orthodontists estimated profile slides which were made of 3 Profile silhouettes in parallel with FH plane. Profile silhouettes were made of soft tissue profile line of cephalometric radiograph. Only orthodontists estimated frontal photographs. Students and orthodontists score 9 in excellent case, score 7 in good case, score 5 in average case, score 3 in poor case. Correlation analysis between orthodontists' esthetic concept and Artists' esthetic concept, between frontal view esthetics and profile view esthetics which estimated by orthotontists, between profile view esthetics and profile measurements which consisted of measurements of 38 female who were scored above 5 mean score in profile silhouette by orthodontists were done. And the finding in this study indicated the following 1. Correlation between orthodontists' esthetic concept and Artists' esthetic concept in profile silhouette was significant (r=0.67,P=0.0001). 2. Correlation between frontal view esthetics and profile view esthetics which estimated by orthodontist was significant (r=0.26,P=0.0381). 3. Measurements which had significant correlation between profile measurements and profile view esthetics wer Na-Pog, to N', BNV to Pog', BNV/B' -Pog', Ls-Li-Pog', Li-B'-Pog' Z angle(P<0.05). 4 Mean and standard deviation of profile measurements of 38 female were obtained.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.04a
• /
• pp.19-22
• /
• 2009

It is essential to predict the deformed roll profile for the prediction of the strip profile in rolling process. The work roll of the Sendzimir mill has a small diameter in comparison to a barrel length, so that it is well deformed by the rolling pressure. Also it has a complex roll system, so it is difficult to analyze the roll deflection. In this paper, 3D finite element method is used for the analysis of the roll deflection of the Sendzimir due to the contact between rolls. But it takes much time to get the results, so that the on-line model to evaluate the radial deformation of a roll is developed on the basis of the finite element method.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.156-161
• /
• 2005

The gray line-profile method is introduced to find fabric density. Some patterned fabrics like stripe design as well as solid fabrics of basic weave structures are used to verify the efficiency and accuracy of the method. The approach is compared with Fourier transform method. Although the gray line-profile method is concise, it shows good results in both solid and patterned fabrics. In addition, it does not require a pre-processing or filtering technique in space or frequency domain to enhance the image suitable for the analysis. However, the approach is slightly influenced by the filter size for finding the local minimums of profile graph.

• International Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.1-5
• /
• 2020

When a rigid wedge is indented in to a semi-infinite block, the material is bulged up around the wedge that is generally called lip. The previous works in this filed considered the outer profile of the lip to be linear. But, present authors observed both experimentally and with the aid of finite element analysis that the profile of the lip is not always linear, and it depends on the angle of the wedge and friction parameters. So, in this work, attempts have been made to calculate hardness of indentation for different wedge angles and friction parameters. As hardness is intrinsic property of material, consideration of either linear or parabolic lip will not be affected much. A comparative study of hardness for linear and parabolic free surface profiles of the piled up material around the cone is analyzed in this work.