• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2637-2643
• /
• 2010

In order to develop a new line injection system for spin draw yarn (FD SDY) fibers, the effect of various parameters in extrusion and melt line conditions on the dispersion and distribution of $TiO_2$ particles within FD PET fibers was investigated. As a result, the dispersibility of $TiO_2$ particles in a PET matrix is found to depend on the particle size and its surface characteristics. Surface modification of $TiO_2$ by dimethyl polysiloxane resulted in the improved dispersibility and affinity of $TiO_2$ particles in the PET matrix. Especially, residence time, mixing temperature, and mixing shear rate in the new line injection system under the SDY spinning process were very important parameters to minimize the agglomeration of $TiO_2$ particles. The FD SDY prepared by the new line injection system was superior to those using the polymerization process and the conventional masterbatch chip dosing process in the color-L and color-b values of the fibers.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1150-1156
• /
• 2008

This paper introduces the PC clustering of the SIMD structure for a distributed processing of on-line contingency to assess a static security of a power system. To execute on-line contingency analysis of a large-scale power system, we need to use high-speed execution device. Therefore, we constructed PC-cluster system using PC clustering method of the SIMD structure and applied to a power system, which relatively shows high quality on the high-speed execution and has a low price. SIMD(single instruction stream, multiple data stream) is a structure that processes are controlled by one signal. The PC cluster system is consisting of 8 PCs. Each PC employs the 2 GHz Pentium 4 CPU and is connected with the others through ethernet switch based fast ethernet. Also, we consider N-1 line contingency that have high potentiality of occurrence realistically. We propose the distributed process algorithm of the SIMD structure for reducing too much execution time on the on-line N-1 line contingency analysis in the large-scale power system. And we have verified a usefulness of the proposed algorithm and the constructed PC cluster system through IEEE 39 and 118 bus system.

• 한국철도학회논문집
• /
• 제16권2호
• /
• pp.117-121
• /
• 2013

철도선로구간의 노후도는 궤도, 노반, 교량, 터널 등 요소시설의 노후도로 결정되며 궤도의 선형 또한 선로구간 노후도에 영향을 준다. 본 논문에서는 계층구조분석(analytic hierarchy process: AHP)과 자료포락분석(data envelopment analysis: DEA)을 활용하여 선로구간의 노후도를 평가하는 방법을 제시한다. AHP는 다수의 전문가들이 평가하는 각 요소시설의 중요도를 체계적으로 파악할 수 있도록 해준다. 요소시설에 대한 중요도는 전문가에 따라 달라질 수 있다. DEA는 선로구간 요소시설의 중요도 가중치 범위를 체계적으로 반영하여 선로구간의 노후도를 평가할 수 있도록 해준다.

• 한국시뮬레이션학회논문지
• /
• 제15권2호
• /
• pp.51-57
• /
• 2006

현재 반도체 산업은 200mm 웨이퍼에서 300mm 웨이퍼 공정으로 기술이 변화하고 있다. 300mm 웨이퍼 제조업체들은 Fabrication Line (FAB Line) 자동화를 비용절감 실현의 방책으로 사용하고 있다. 또한 기술의 확산, 시장 경쟁력의 격화 등으로 생산성 향상에 의한 원가절감이 반도체 산업 성장의 근본요인이 되고 있다. 대부분의 반도체 업체들은 생산성을 높이기 위해 average cycle time을 줄이는데 총력을 기울이고 있다. 본 논문에서는 average cycle time을 줄이는 데 중점을 두고, 300mm 반도체 제조공정을 시뮬레이션 하였다.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.26-33
• /
• 2019

This study is a thermal and flow analysis of Organic Rankine Cycle (ORC) pipe line for 250 kW grade waste gas heat recovery. We attempted to obtain the boundary condition data through the process design of the ORC, which can produce an electric power of 250 kW through the recovery of waste heat. Then, we conducted a simulation by using STAR-CCM+ to verify the model for the pipe line stream of the 250 kW class waste heat recovery system. Based on the results of the thermal and flow analyses of each pipe line applied to the ORC system, we gained the following conclusion. The pressure was relatively increased at the pipe outside the refracted part due to the pipe shape. Moreover, the heat transfer amount of the refrigerant gas line is relatively higher than that of the liquid line.

• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.70-76
• /
• 2022

Calcium-phosphate-based bioceramics are promising biomaterials for scaffolds because they can assist in bone regeneration. In this study, a laser sintering deposition system was developed, and 3D hydroxyapatite (HA) scaffolds were fabricated. The main process conditions of the HA scaffolds were laser power, table velocity, and laser focal distance. As the laser power increased, the line width, line height, and layer thickness also increased. Further, the line width, line height, and layer thickness decreased as the table velocity increased. As the laser focal distance increased, the line width increased, but the line height and layer thickness decreased. The fabricated green scaffolds were sintered at 1050 ℃ and 1150 ℃. The sintered scaffolds had a uniform and continuous interconnected shape, with pore sizes ranging from 850 to 950 ㎛ having 53% porosity. The compressive strength of the scaffolds decreased from 0.72 MPa (1050 ℃) to 0.53 MPa (1150 ℃). The biocompatibility of the scaffolds was investigated by analyzing the adhesion of osteoblast-like MG-63 cells cultured on the surfaces of the scaffolds. The results indicate that the scaffold sintered at 1050 ℃ had good mechanical and biological properties compared to that at 1150 ℃.

• 대한수학교육학회지:학교수학
• /
• 제14권4호
• /
• pp.409-429
• /
• 2012

본 연구의 목적은 학생들이 수학적 모델링 활동을 통해 미분계수를 재발명하는 과정을 분석하여 학교현장의 미분계수 지도에 의미 있는 시사점을 제공하는 것이다. 이를 위해 고등학교 2학년 문과 학생 2명을 대상으로 모델링 과정과 그 과정을 통해 나타나는 수학적 개념 변화를 분석하였다. 그 결과, 학생들은 할선의 극한으로 접선을 재구성하고 접선의 기울기와 순간속도를 연결하기 위해 미분계수를 재발명하였다. 이 과정을 통해 학생들의 접선 개념과 시간-속도 그래프에 대한 개념이 변화되었음을 확인하였다. 본 연구의 모델링 과정에서는 학생들의 시각적인 이해를 돕고, 수학적인 개념을 탐구하는 본질적인 사고에 집중할 수 있도록 테크놀로지를 활용하였다.

• 품질경영학회지
• /
• 제42권3호
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• Journal of Welding and Joining
• /
• 제24권5호
• /
• pp.62-66
• /
• 2006

Panel line is an important process occupying the largest work amount in shipbuilding. In this research product simulation has been carried out to establish the optimal production scheduling. For this purpose a web-based panel line simulator was developed using an object modeling technology and C# language. The balance of work-load and increase in the productivity by the improvement of production facilities and process are the key factors for a good scheduling. In this study SPRT(Shortest Remaining Process Time) rule was applied for the work-load balancing and a good result achieved. To increase the productivity in the stiffener welding stage which is a bottleneck; process, more welding heads and higher welding speed were tested using the developed simulator. The simulation results showed that either more welding head or higher welding speed decreased the total work time. Use of both, however, deteriorated the productivity because of the bottleneck in the following stage. This result points out that the improvement of production facilities and/or process should be evaluated with their influences on the leading and following processing stage.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권12호
• /
• pp.665-682
• /
• 2007

라인 드로잉은 적은 표현으로 물체에 대찬 많은 정보를 줄 수 있다는 점 때문에 비사실적 렌더링 분야에서 중요시되고 있다. 하지만 라인 드로잉에 대한 연구는 이차원 영상에 비해 물체에 대한 정보가 충분한 삼차원 모델을 대상으로 주로 이루어졌다. 본 논문에서는 이차원 영상을 라인 드로잉 형태로 표현하는 효과적인 방법을 제시한다. 이를 위한 알고리즘은 크게 필터링, 선 연결, 스타일화 세 단계로 나뉜다. 필터링 단계에서는 영상의 어느 부분에 선이 그려질지를 우도 함수를 이용하여 예상한다. 선 연결 단계에서 필터링 결과를 클러스터링 및 그래프 검색을 이용하여 연결, 라인 스트로크들을 찾아낸다. 마지막 스타일화 단계에서는 찾아낸 라인 스트로크들을 곡선 근사, 텍스쳐 매핑 등을 이용하여 여러 비사실적 렌더링 형태로 표현한다. 이러한 방법을 이용하여 실제 이차원 영상에서 라인 스트로크를 얻고, 디테일 제어를 적용하여 여러 가지 원하는 스타일의 라인 드로잉을 만들 수 있다.