• 전기학회논문지
• /
• 제62권12호
• /
• pp.1706-1711
• /
• 2013

This paper presents the filter of a resonator comprising a shorted open gap ring(SOGR) and interdigital lines. The proposed filter has the ultra wideband characteristic operating from 3 GHz to 10.5 GHz. In order to achieve the remarkable improvement in the size-reduction of the overall filter structure, only one cell of the SOGR with the inter-digital lines is adopted. It is shown that this filter has the size of $18mm{\times}15mm$ using a metamaterial, the fractional bandwidth over 100%, the insertion loss much less than 1dB, an acceptable return loss performance in the results.

• 한국정보전자통신기술학회논문지
• /
• 제8권2호
• /
• pp.128-132
• /
• 2015

논문은 이중 급전을 갖는 마이크로스트립 이중 모드 대역 통과 필터를 제안한다. 제안된 필터는 이중 모드 구현을 위해 모서리 부분을 제거되고, 직교 슬롯을 포함하는 정사각형 패치와 이중 급전 구조로 구성된다. 직교 슬롯은 공진기의 소형화 및 불요신호를 억압하기 위해 사용되고, 상측 차단 대역에서의 차단 특성을 개선하기 위해 이중 급전 구조를 사용하였다. 보다 자세한 필터 설계 방법 및 특성 결과를 본문에 기술하였다.

• 한국통신학회논문지
• /
• 제32권6A호
• /
• pp.648-656
• /
• 2007

본 논문은 S-라인(비방사 마이크로 스트립)을 이용하여 무선 가입자 회선(WLL) 및 지역 다지점 분배 서비스(LMDS) 등 광대역 무선 가입자 망으로의 기술 적용을 위한 밀리미터 대역의 중심주파수 37GHz에서 세라믹을 이용한 대역 통과 필터에 관한 것이다. 아래 위가 도체로 덮인 유전체 기판 위의 선로 사이에 세라믹 공진기를 삽입시켜, 구조적 공진 특성을 이용함으로써 필터 특성을 얻어내는 방법으로 제작하였다. 이러한 필터 구조와 특성을 근거로 한 시뮬레이션을 하여, 1단 세라믹 공진기의 공진주파수를 찾는 공식과 4단 세라믹 공진기의 대역을 구하는 공식을 일반화 하였다. 또한, 4단 세라믹 공진기의 시뮬레이션 결과를 바탕으로 제작된 실험 구조물을 Network Analyzer를 사용하여 실험을 실시하였으며, 시뮬레이션 결과의 대역은 36.58GHz-37.650GHz, 리플과 손실은 -ldB 이내. Cutoff 특성은 S(2,1)그래프의 대역 좌우로 -35dB밑으로 1GHz이내인 것에 대하여 실험 결과의 대역은 36.6GHz-37.65GHz, 손실은 -ldB이내, 리플은 -3dB이내, Cutoff 특성은 S(2,1)그래프의 대역 좌우로 -30dB밑으로 1GHz 이내인 특성을 나타내었다.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.543-552
• /
• 2010

Modified compact combline bandpass filters are proposed based on the miniaturized quarter-wave transmission line which is composed of the parallel coupled line and lumped capacitors. The electrical length of the parallel coupled line in a resonator, which determines the size of combline bandpass filters, is just $5^{\circ}$ or $7^{\circ}$, resulting in a compact circuit area. The designed combline bandpass filter also has a wide upper stopband by suppressing the spurious passbands, not moving. Measured results of two fabricated filters centered at 400MHz show good agreement with the theoretical predications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.838-840
• /
• 1998

$BiNbO_4$ ceramics with 0.06wt% CuO, 0.1wt% $V_{2}O_{5}$ sintered at $900^{\circ}C$. The strip line chip filter has been design and fabricated by screen printing with silver electrode after tape casting. The characteristics of the fabricated filters were compared with the simulated results. In the strip line chip filter, insertion loss value of band pass width was 3.65[dB] and return loss was 8.9[dB] and center frequency was similar that simulation results.

• 산업기술연구
• /
• 제28권B호
• /
• pp.129-133
• /
• 2008

A method to reduce seam line artifact in spatial compounding of ultrasonic images is presented. Spatial compounding is a speckle reducing imaging technique in which a number of ultrasound images of a given target that have been obtained from multiple view angles are combined into a single compounded image by combining the data received from each data point in the compounded image. Since different view angle results in different view area, and the images of different view arms are combined into an image, the compounded image consists of regions with different signal to noise ratio, and the boundary lines between these regions are visible as seam lines in the compounded images. In this paper, we present an algorithm that reduces the visibility of this seam line in the spatially compounded images. Design procedure for a FIH filter is described and the results of applying the filter to in-vivo ultrasonic images are analyzed.

• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.114-120
• /
• 1997

A design method is newly presented for the creation of planar type filters which shapes will be nonuniform transmission line with continuously varying characteristic impedances. Those filters yield frequency characteristics of the bandstop filter in transmission, and have not nay discontinuities. The design is achieved by the control of wave propagation in view to both reflection an transmission properties on the dispersive nonuniform line within the desired frequency band. The developed algorithm is based on optimized perturbations of inherent nulls of lobes from the solution of first-order nonlinear differential equation for reflection coefficients of the nonuniform line, and an appropriate distribution of reflection coefficient which affects to filter length and bandwidth. Practical measurements for designed wideband microstrip and stop filter show very good agreement with theoretical results.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.23-31
• /
• 2015

This paper proposes an advanced distance relaying based on the DC offset removal filter to minimize the effects of DC offset on a double circuit transmission line. The proposed DC offset removal filter uses only one cycle of data for phasor extraction computation, which does not need to preset the time constant of the DC offset component. This proposed distance relaying uses not only the residual current of the faulted circuit but also mutual current of the healthy adjacent circuit. A series of off-line test results using ATP simulation data show the effectiveness of the an advanced distance relaying.

• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.241-250
• /
• 1996

In this work, an improved architecture of two-dimensional digital filter(2D DF) is suggested, and then the filter is simulated by C, VHDL language and related layouts are designed by Berkeley CAD tools. The 2D DF consists of one-dimensional digital filters and delay lines. For one-dimensional digital filter(1D DF) case, once filter coefficients are represented by canonical signed digit formats, multiplications are exected by hardwired-shifting methods. The related bit numbers are handled to prevent picture quality degradation and pipelined adder architectures are adopted in each tap and output stage to speed up the filter. For delay line case, line-sharing DRAM is adopted to improve power dissipation and speed. The filter layout is designed by semi/full custom methods considering regularity and speed improvement, and normal operation is confirmed by simulation.

• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.49-56
• /
• 1992

In this paper a band-pass filter using dielectric resonators with tuning screw and spacer at Ku-band is designed and constructed. For the filter design and construction, the coupling coefficient K between two resonators is numberically evaluated. The external quality factor Q$_{ex}$ is also calculated with a microstrip line which is necessary for the field excitation of dielectric resonator. The coupling between dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter in band-pass filter. The Q$_{ex}$ and K data which are evaluated by numberical analysis are practically applied to the filter construction. The theoretical Band-pass filter responses are given by Chebyshev approximation and they are nearly similar to the experimental results.