• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.335-336
• /
• 2008

Overhead transmission lines are mainly crossing mountainous area. They are easily affected in weathers like typhoon, strong wind, lightning, heavy rain, or heavy snow. Sometimes these weathers cause transmission line faults. A lightning flashover is most often fault. Nowadays lightning density in KOREA is growing high and lightning flashovers occur more often. A lightning flashover on transmission line is mostly cleared by momentary operation of a circuit breaker, so power failure happens rarely. However, when both circuits trip simultaneously due to the lightning flashovers on double circuit transmission line, short time power failure and voltage drop happen. KEPCO has used transmission line arresters to avoid double circuit simultaneous trip out since 2003. And transmission line arresters cannot be installed with KEPCO's present metal fittings, so various fittings have been used for each transmission line arrester manufacturer. This paper introduces development and standardization of arc-horn and metal fittings for transmission line arrester which can be used for both existing lines and new lines in KEPCO.

• Journal of Fashion Business
• /
• v.26 no.3
• /
• pp.116-137
• /
• 2022

The purpose of this study was to develop jacket patterns that could fit well for women in their 20s with turtle neck syndrome body shape and to present a pattern drafting method. As a research method, an educational pattern was chosen through a preliminary experiment. Fit problems of the educational pattern were derived by wearing it on a virtual model with a turtle neck syndrome body type for each neck angle. Based on the three types of experimental patterns developed by supplementing these problems, a development pattern drafting method was developed for each neck angle. Three development patterns were compared and evaluated with the educational pattern using 3D virtual fitting. Fit problems of the educational pattern included: 1) insufficient ease amounts for hip, hem, bicep, elbow, and sleeve hem circumference; 2) horizontal items could not be leveled due to insufficient back length; 3) the shoulder line went backwards; and 4) the front center line did not form a vertical line. To solve these problems, an experimental pattern was developed by increasing the insufficient ease amount, increasing the insufficient back length, and correcting the position of the shoulder line. Measurements that differed in the pattern drafting method of the three types of development patterns by neck angle were positions of back center line and back neck point, front length, and front neck width. Through appearance evaluation of the development pattern and educational pattern by neck angle, the development pattern was highly evaluated, indicating that problems of the educational pattern were improved.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.103-106
• /
• 2002

This paper has studied a remote AMR(Automatic Meter Reading) system using the power line and the telephone line as a communication media and the digital power meter. In the developed system, because we have used the power line and telephone, the facility is very easy and then its cost is not expensive. The system includes following elements: a digital power meter, an indoor communication system using a power line modem and a telephone line interface system for sending data to the utility company.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.371-374
• /
• 1997

Recently, the development of computer achieves a system which is similar to the mechanics of human visual system. The 3-dimensional measurement using monocular vision system must be achieved a camera calibration. So far, the camera calibration technique required reference target in a scene. But, these methods are inefficient because they have many calculation procedures and difficulties in analysis. Therefore, this paper proposes a native method that without reference target in a scene. We use the grid type frame with different line widths. This method uses vanishing point concept that possess a rotation parameter of the camera and perspective ration that perspect each line widths into a image. We confirmed accuracy of calibration parameter estimation through experiment on the algorithm with a grid paper with different line widths.

• Journal of the Korean Society for information Management
• /
• v.13 no.2
• /
• pp.19-37
• /
• 1996

The development of information retrieval between 1950s and 1990s is described chronologically. For each decade, the following information retrieval systems are examined : post-coordinate and KWIC indexing methods for the 1950s ; off-line and experimental on-line systems for the 1960s ; on-line and full-text retrieval systems for the 1970s ; full-text databases, on-line interfaces, and overseas and domestic on-line databases for the 1980s ; and finally for the 1990s, CD-ROM, multimedia, hypertext, and Internet. The prospects for the future are also discussed.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2215-2222
• /
• 2010

Advanced EMU have been enhanced in terms of safe transport and maintainability. It is a new urban railway technology that enables an operation institution to cut repair and maintenance costs and customers to use convenient service at lower costs based on IT technology. If a development vehicle of Advanced EMU is completed, it will be used to test the entire advanced EMU system through sufficient performance check and reliability check prior to operation in commercial line. It will also verify efficiency, safety, punctuality and energy efficiency of transport. Accordingly, it is necessary to figure how to repair and maintain vehicles to enhance safety of Advanced EMU system in cooperation with operation during the period of comprehensive evaluation on the operation of a development vehicle in a test line. In this paper, we investigated the maintenance program of Advanced EMU on test operation in Dabul line. The test condition and operation environment of Advanced EMU in Daebul line was analyzed.

• The Research Journal of the Costume Culture
• /
• v.12 no.1
• /
• pp.104-120
• /
• 2004

Animation character market in Korea has been dominated by licensed characters (e.g., Walt Disney′s) of which market share is 80%. While market share for Korean characters such as "Mashimaro" and "Little Dinosaur Dooly" is increasing, the application of such characters to fashion products is still limited. For the development of the Korean character market, application of original animation characters should be applied to various fashion products. The main purpose of this study was to design toddler apparel line using "Little Dinosaur Dooly," one of the most popular domestic animation characters. The design focus is the green color of Dooly because the color is the distinctive concept of the brand. Results of the study indicated that developing toddler apparel line with a Korean animation character was a meaningful attempt, as imported licensed characters were dominant in domestic fashion market. The key differentiating factor was the use of green color. In addition, use of various supporting characters, namely Dooly′s friends, demonstrated potential line extension forming animation character groups similar to Warner Brothers′"Looney Tunes."

• Journal of Sensor Science and Technology
• /
• v.30 no.1
• /
• pp.30-35
• /
• 2021

To operate an underwater robot in an environment with fluid flow, it is necessary to recognize the speed and direction of the fluid and implement motion control based on these characteristics. Fish have a lateral line that performs this function. In this study, to develop an artificial lateral line sensor that mimics a fish, we developed a method to measure the flow speed and the incident angle of the fluid using a pressure sensor. Several experiments were conducted, and based on the results, the tendency according to the change in the flow speed and the incident angle of the fluid was confirmed. It is believed that additional research can aid in the development of an artificial lateral line sensor.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.110-116
• /
• 2006

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1118-1123
• /
• 2011

The introduction of high speed railway(KTX) in Korea after the Korean high speed train through the KTX-II of the development is being run is made. Thus the demand for the railway technology advances and high performance, Korean government promoted the development of the next-generation high speed train system(HEMU-400X). In addition to the production of train system essential element of the train through an on-line test is to evaluate the performance. Through the on-line test of the train in order to evaluate the performance test items should be selected first and need to the test procedures are required. In addition, an Overall Measuring System(OMS) to measure the performance of the train system should be established. In this study for the on-line test of the HEMU-400X test items was selected for detailed measurements and performance evaluation of a comprehensive and efficient trains to test an OMS for the development are discussed.