• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.865-870
• /
• 1998

We propose a multifunctional power line compensator (PLC) which can individually compensate multiple impediments at the same time. The PLC has the flexibility to share power to each compensation according to commands, this improving the working rate. We constructed a 100kVA PLC model including a controller with digital signal processor (DSP) to realize a multifunctional compensation were obtained.

• 한국수산과학회지
• /
• 제37권5호
• /
• pp.400-404
• /
• 2004

Growth performances of the selected and the non-selected red sea bream (Pagrus major) lines were evaluated up to marketable size. The offspring were mass-produced either from the selected line (the fourth generation of broods from mass selection) or the non-selected line (the second generation of wild broods). Early (59 to 103 days old, trial I) and late growth performances (4 to 24 months old, trial II) were evaluated based on communal rearing in land-based tanks and sea cages, respectively. In trial I, the selected line exhibited significantly higher values in both weight gain (WG) and specific growth rate (SGR) when compared to those observed in the non-selected line (P<0.05). In trial II comprising of three growth phases (4-9, 9-16 and 16-24 months old), selected line showed only slightly improved in WG and SGR at the beginning two growth phases (4-9 and 9-16 months old) (P>0.05), however, displayed significantly higher values at the last growth phase (16-24 months old) (P<0.05). Overall WG and SGR throughout the experiment (4-24 months) were also significantly higher in the selected line than the non-selected line (P<0.05). Consequently, mean body weight of the selected line at 24 months old was 1.4-fold (40.8{\%}\;increased) as compared to that of the non-selected line. This present result indicates that mass selection of this species against the growth traits might be quite effective, and the present advance has important Implication in the productivity enhancement of red sea bream aquaculture.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권8호
• /
• pp.1010-1026
• /
• 2004

소프트웨어 프로덕트 라인 공학의 목표는 일련의 유사한 소프트웨어 시스템의 공통성과 구별되는 특성을 이해하고 제어함으로써 시스템의 체계적인 개발을 지원하는 것이다［1］. 이것은 소프트웨어 개발 시 나오는 산출물들을 핵심 자산으로 만들어 놓고 이를 체계적으로 재사용 할 수 있도록 지원하기 위한 프레임웍 역할을 한다. 현재 많은 기술들이 프로덕트 라인 공학 관련하여 연구되고 있지만, 그 초점이 소프트웨어 아키텍쳐나 상세 설계 또는 코드에 맞추어져 있다［2］. 소프트웨어 프로덕트 라인 공학에서는 컴포넌트의 공급, 조립뿐만 아니라 조립공정까지 특정 요구나 변화에 신속히 적응할 수 있도록 관리하는 것이 중요한데, 이는 요구사항 분석 단계에서부터 이루어져야 한다. 소프트웨어 프로덕트 라인 공학에서 요구사항은 전통적인 시스템 개발에서와 마찬가지로 모든 개발의 기초가 되는 부분이며, 다른 핵심 자산의 공통성과 가변성의 성질을 결정짓게 만들 수 있는 기준이 된다. 그러나 요구사항들을 다 반영하기도 전에 변경이 발생하는 수많은 경험을 해 온 것처럼, 올바른 요구사항을 획득하고 이를 분석, 관리한다는 것은 결코 쉬운 일이 아니다. 특히, 여러 개의 시스템을 개발할 때 사용할 요구사항은 공통성과 가변성의 속성을 가지게 된다. 그러므로 계획할 수 있는 변화에는 충분히 안정적이면서, 반면에 예측하지 못하는 변화에 잘 적응하고 개조될 수 있도록 유연성을 지닌 핵심 요구사항을 개발, 관리하기 위한 체계적인 방법이 필요하다. 본 논문에서는 소프트웨어 프로덕트 라인에서 핵심 자산의 하나인 도메인 요구사항을 관리하는 방법에 대하여 제안한다. 이를 통해 도메인 요구사항에 대한 재사용성을 중대시키고 시스템의 목표를 정확히 세우는 데 투자되는 많은 시간과 노력을 감소시켜 준다. 이는 결과적으로 소프트웨어 개발 시간과 비용을 줄이고, 생산성을 향상시키는 등의 장점을 가져다준다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.531-534
• /
• 2005

This paper presents a new data line sharing technique for TFT-LCD panels. This technique reduces the number of data driver IC's to half by having two adjacent pixels share the same data line. This in turn doubles the number of gate lines, which are integrated directly on the glass substrate of amorphous silicon for further cost reduction and more compactness. The proposed technique with new pixel array structure was applied to 15.4 inch WXGA TFT-LCD panels and has proven that the number of driver IC's were halved with nearly 41% circuit cost reduction and 5.3% reduction in power consumption without degrading the image quality.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.964-973
• /
• 2008

In this study, a short-wavelength coplanar-type transmission line employing periodic ground structure (PGS) was developed for application to miniaturized on-chip passive component on Si Radio Frequency Integrated Circuit (RFIC). The transmission line employing PGS showed shorter wavelength and lower characteristic impedance than conventional coplanar-type transmission line. The wavelength of the transmission line employing PGS structure was 57 % of the conventional coplanar-type transmission line on Si substrate. Using the theoretical analysis. basic characteristics of the transmission line employing PGS (e.g., bandwidth. loss, impedance, and resonance characteristics) were also investigated in order to evaluate its suitability for application to a development of miniaturized passive on-chip components on silicon RFIC. According to the results. the bandwidth of the transmission line employing PGS was more than 895 GHz as long as T is less than 20${\mu}m$, and the resonance characteristic was observed in 1239 GHz, which indicates that the PPGM structure is a promising candidate for application to a development of miniaturized on-chip passive components on Si RFIC.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.79-87
• /
• 1999

As it is well appreciated plate forming by line heating takes an important role in ship production process. The paper deals with the development of line heating simulator which can produce the resultant deformation due to line heating in a few minute adn with which user can see the result graphically. For the present purpose mechanical modelling is adopted which can explicitly represent the physical resultant of line heating. In developing the present line heating simulator several program modules are integrated by adopting GUI concept such that the simulator can produce resultant deformation with keeping high accuracy. Application example is illustrated for the twisted shape surface which can be frequently seen in ship and offshore structures.

• 산업공학
• /
• 제23권1호
• /
• pp.58-67
• /
• 2010

The purpose of this paper is to present the development processes of the assembly line tester of power transmission for lift truck. Because power transmission is most important part of lift truck, all assembled powertrain parts must be inspected for operational defects, pressures and RPM. Developed assembly line tester is designed to take about 25 minutes for inspecting each assembled power transmission and located it at the end of assembled line. The assembly line no-load tester consists of three parts: (1) the driving hardware part; for installing and operating the transmission. (2) control PCB part; send data from sensors to a computer and control driving part, (3) operation software of no-load tester; for an automatic inspection or manual inspection, for database management and printing transcripts.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.238-241
• /
• 2003

The purpose of this study is to improve the frequency response of the Line coupler for Power Line Communication. We separate transmission and reception line coupler and design the reception line coupler using GIC. It was found from the result that separation transmission and reception line coupler using GIC have the advantage of a design and high Q.

• International Journal of CAD/CAM
• /
• 제2권1호
• /
• pp.23-28
• /
• 2002

This paper presents an efficient line-offset algorithm for general polygonal shapes with islands. A developed sweep-line algorithm (SL) is introduced to find all self-intersection points accurately and quickly. The previous work is limited to handle polygons that having no line-segments in parallel to sweep-line directions. The proposed algorithm has been implemented in Visual C++ and applied to offset point sequence curves, which contain several islands.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.83-88
• /
• 2010

A new live-line insulator tester was developed to detect faulty insulators in 154kV power transmission lines. This paper is the first part of the two-part paper and deals with its tester development. The developed tester has the following characteristics. First, it automates parts of the insulator inspection process by using a sensor and an actuator, and secondly, it sustains its weight by itself, not by a lineman. Finally, it measures the insulation resistance of an insulator together with its distribution voltage to provide more information for its analysis and diagnosis. These leads to the improvement of its operation efficiency, measurement reliability and usability. Its effectiveness was validated by live-line field tests in actual power lines.