• 제목/요약/키워드: Line Switching

검색결과 610건 처리시간 0.032초

페라이트 코어와 스위칭 증폭기를 이용한 PLC 신호 감쇠 저하 시스템 (A Signal Anti-reduction System in PLC using Ferrite Core and Switching Amplifier)

  • 고종선;김영일;김규겸
    • 전력전자학회논문지
    • /
    • 제6권6호
    • /
    • pp.474-480
    • /
    • 2001
  • 본 논문은 근거리 통신에 있어서 새로운 통신선을 설치하여 이용하는 대신에 기존의 전력선을 이용하는 통신시 스템에 대하여 신호감쇠 저감방법을 다룬다. 이 시스템은 정보화 시대가 되어감에 따라 원격검침이나 가정자동화 등에 매우 유용하다. 기존의 시스템은 정보를 전달하는데 있어서 신호전압의 감쇠로 인한 문제점을 가지고 있다. 제안된 시스템은 작은 내부저항을 가지는 특수한 구조의 스위칭 증폭기 시스템과 커플링 회로에 고효율이 페라이 트 코어를 사용하였다 PLC 시스템의 부하손실과 커플링 회로에서의 손실을 막기 위해 이 새로운 시스템을 제안하였다.

  • PDF

슬라이딩모드를 이용한 SCARA 로보트의 궤적제어에 관한 연구 (A Study On The Trajectory Control of A SCARA Robot Using Sliding Mode)

  • 이민철;진상영;이만형
    • 대한기계학회논문집
    • /
    • 제19권1호
    • /
    • pp.99-110
    • /
    • 1995
  • An industrial robot needs a simple and robust control algorithm obtaining high precision control performance in spite of disturbance and parameter's change. In this paper, for solving this problem, a new sliding mode control algorithm is proposed and applied to the trajectory control of a SCARA type robot. The proposed algorithm has diminished the chattering occurring in sliding mode by setting a dead band along the switching line on the phase plane. It shows that we can easily obtain a simple switching control input satisfying sliding mode in spite of regarding nonlinear terms of a manipulator and servo system as disturbance. A guideline for selection of dead-band width is determined by optimal value of cost function presenting magnitudes of chattering and error. By this algorithm, we can expect the high performance of the trajectory tracking of an industrial robot which needs a robust and simple algorithm.

An On-Line Harmonic Elimination Pulse Width Modulation Scheme for Voltage Source Inverter

  • Salam, Zainal
    • Journal of Power Electronics
    • /
    • 제10권1호
    • /
    • pp.43-50
    • /
    • 2010
  • This paper proposes a new harmonic elimination PWM (HEPWM) scheme for voltage source inverters (VSI) based on the curve fittings of certain polynomials functions. The resulting equations to calculate the switching angle of the HEPWM require only the addition and multiplication processes; therefore any number of harmonics to be eliminated and the fundamental amplitude of the pole switching waveform (NP1) can be controlled on-line. An extensive angle error analysis is carried out to determine the accuracy of the algorithm in comparison to the exact solution. To verify the workability of the technique, an experimental single phase VSI is constructed. The algorithm is implemented on a VSI using a 16-bit microprocessor. The results obtained from the test rig are compared to the theoretical prediction and the results of the MATLAB simulations.

A Novel Boost PFC Converter Employing ZVS Based Compound Active Clamping Technique with EMI Filter

  • Mohan, P. Ram;Kumar, M. Vijaya;Reddy, O.V. Raghava
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제8권1호
    • /
    • pp.85-91
    • /
    • 2008
  • A Boost Power Factor Correction (PFC) Converter employing Zero Voltage Switching (ZVS) based Compound Active Clamping (CAC) technique is presented in this paper. An Electro Magnetic Interference (EMI) Filer is connected at the line side of the proposed converter to suppress Electro Magnetic Interference. The proposed converter can effectively reduce the losses caused by diode reverse recovery. Both the main switch and the auxiliary switch can achieve soft switching i.e. ZVS under certain condition. The parasitic oscillation caused by the parasitic capacitance of the boost diode is eliminated. The voltage on the main switch, the auxiliary switch and the boost diode are clamped. The principle of operation, design and simulation results are presented here. A prototype of the proposed converter is built and tested for low input voltage i.e. 15V AC supply and the experimental results are obtained. The power factor at the line side of the converter and the converter efficiency are improved using the proposed technique.

혼합송전계통에서 재폐로 해석을 위한 모델수립 및 개폐과전압해석 (Modeling and Switching Overvoltage Analysis for Reclosing Analysis in Combined Transmission Systems)

  • 임광식;이종범;강지원;정채균
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.442-443
    • /
    • 2008
  • This paper describes modeling using the EMTP/ATPDraw for reclosing analysis in 154kV combined transmission systems, and analyzes switching overvoltage. Current transformer established at lead-in area and lead-out area in transmission line and circuit breaker were modeled using TACS in the EMTP/ATPDraw. And also MODELS was constructed by signal processing of the operating reclosing. The simulation was carried out the switching overvoltage according to the length of overhead and underground transmission line, overvoltage between sheath and earth, and voltage between joint boxes.

  • PDF

전력계통의 고장용량 억제를 위한 최적조류계산 연구 (A Study on the Optimal Power Flow with Suppressing the Short Circuit Capacity in Power Systems)

  • 이광호
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제49권12호
    • /
    • pp.575-580
    • /
    • 2000
  • Switching of the transmission lines(T/L) is one of the ways for suppressing the short circuit capacity. This paper presents the extended optimal power flow(OPF) to the problem of selecting the T/Ls to be open. The constraints of the short circuit currents within limits are added to the inequalities of OPF. Also, the overload on the other lines due to switching of T/Ls is avoided by the linearized inequalities. The number of the open lines can be minimized by incorporating into the objective function of OPF in order to maintain reliability. The method of an effective calculation of the extended OPF is also proposed in this paper, which makes the two parts decoupled. The one concerning the generation dispatch is solved in the first place by the conventional method. Secondly, the other concerning the line-switching is optimized by the proposed formulation.

  • PDF

광 펄스 형태에 따른 광 패킷 교환 노드의 오율 분석 (Packet Error Analysis of an Optical Packet Switching Node Depending on the Optical Pulse Shapes)

  • 오정배;신종덕;김부균
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 하계학술발표회
    • /
    • pp.18-19
    • /
    • 2000
  • In this paper, packet error rates of an all-optical packet switching node, which uses a fiber-optic delay-line matched filter as the optical packet header processor, has been calculated for the various optical pulse shapes.

  • PDF

스텝 펄스파를 사용하는 캐스케이드 인버터에서 스위치의 간단한 도통각 계산법 (A Simple Method for Conducting Angle Calculation of Switching Devices in Cascaded Inverters Using Step Pulse Waves)

  • 김형창;김태진;강대욱;현동석
    • 전력전자학회논문지
    • /
    • 제8권6호
    • /
    • pp.488-495
    • /
    • 2003
  • 최근에 높은 전력과 전압의 적용을 위한 방법으로써 PWM 방법보다는 스텝 펄스파를 이용해 출력 전압 레벨을 조합하는 멀티레벨 인버터가 폭 넓게 사용되어지고 있다. 이 방식은 도통각을 통해 한주기에 한번만 온, 오프 하기 때문에 스위칭 손실 측면에서 유리한 특성을 갖는다. 본 논문에서는 도통각을 얻는 간단한 방법을 제안하며 이 방법은 출력 전압 레벨에 의해 나누어진 기준 전압 파형의 전압-시간 면적들을 통해 인버터의 출력 스텝 펄스파를 구성한다. 또한 제안한 방법은 근사법에 의한 연립방정식의 해를 구할 필요가 없기 때문에 기존의 방법과는 달리 계산량을 줄일 수 있고 온 라인에 의해 도통각을 얻을 수 있는 장점이 있다.

보안측면에서의 가상사설망과 전용회선망의 비교 연구 (A study on the comparison of VPN with Dedicated Line Network on security)

  • 정은희;이병관
    • 한국정보전자통신기술학회논문지
    • /
    • 제1권2호
    • /
    • pp.107-122
    • /
    • 2008
  • 통신망은 크게 누구든지 접속할 수 있는 공중망과 해당 조직 내의 사람들만이 접속할 수 있는 사설망으로 구분할 수 있는데, 공중망의 회선비용 절감과 사설망의 신뢰성 있는 보안 통신 지원이라는 장점만을 부각시킨 것이 VPN이라 할 수 있다. 본 연구에서는 3계층 터널링 기법을 사용하는 IPSec VPN과 2계층 스위칭 기법과 3계층 라우팅 기술을 접목한 새로운 스위칭 기법을 이용하는 MPLS(Multi Protocol Label Switching), 그리고 전용회선을 보안측면에서 비교 분석하였다. VPN이 비용면이나 보안측면에서 전용회선보다 우수하며, IPSec VPN과 MPLS VPN을 비교해보면 안전한 데이터 전송을 위한 보안 유지, 비용 절감, QoS 제공, 운영 및 관리의 유연성을 보장하고, 오히려 IPSec VPN의 문제점을 보완하는 MPLS VPN이 차세대 VPN이라 할 수 있다.

  • PDF

고조파 저감을 위한 소프트 스위칭 승압형 PFC컨버터의 특성해석 (Characteristics analysis of PFC boost converter with soft switching for harmonics reduction)

  • 김봉규
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2000년도 전력전자학술대회 논문집
    • /
    • pp.150-154
    • /
    • 2000
  • This paper proposes PFC boost converter with soft switching for harmonics decrement and analyzes characteristics of PFC boost converter. In this technique power factor correction(PFC) is usually obtained by operating the PFC stage in the discontinuous current mode(DCM) Switching devices are operated for reducing current stress and electronical noise. As a result eliminate 3rd harmonic component and high power factor(PF) of the input line are verified by characteristics analysis and experimental results.

  • PDF