• Journal of Chest Surgery
• /
• 제10권1호
• /
• pp.133-139
• /
• 1977

Two cases of congenital aneurysm of sinus of Valsalva, ruptured into the right ventricle, and associated with ventricular septal defects, were undergone intracardiac repair with the aid of extracorporeal circulation using Bentley bubble oxygenator and moderate hypothermia. Case 1. A 20 year old male, with the chief complaints of palpitation and dyspnea, was admitted to Kyungpook National University Hospital on Dec. 16, 1976. Continuous machinery murmur was heard best at left 3rd. intercostal space along the sternal border. Retrograde aortography disclosed aneurysm of the right coronary cusp, which ruptured into the right ventricle. Utilizing cardiac bypass and moderate hypothermia, the right ventricle was opened and aneurysm was closed by direct sutures. Associated ventricuar septal defect was directly ,closed and suture line was reinforced by Dacron patch. Total bypass time was 112 minutes and total aortic cross clamping time was 37 minutes. Assist ventilation was carried out for 28 hours postoperatively. His postoperative course was smooth except removal o1 substernal hematoma and he was .discharged on 24th postoperative day. Case 2. A 28 year old man was admitted to our Hospital on June 9, 1976. two weeks prior to this admission, suddenly he had collapsed while he was walking on the street. Following `this episode, palpitation, dyspnea on exertion and frequent respiratory infection developed. Grade IV systolic murmur was heard best at 3rd intercostal space along the sternal border. Retrograde aortography confirmed the diagnosis of rupture of aneurysm of the sinus Valsalva ruptured into the right ventricle. Under the cardiopulmonary bypass the right ventricle was opened and ruptured aneurysm and infracristal ventricular septal defect were directly closed and reinforced with Dacron patch. Postoperative course was uneventful and he was discharged on 14th postoperative day. The pathogenesis of aneurysm of the sinus Valsalva and mode of diagnosis were discussed. Principle of surgical repair was presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.180-185
• /
• 2001

In the life assessment for plant structural component, the research on deterioration of toughness and material properties occurred in weldments has been considered as very important problems. In general, the microstructures composed in weldments are hugely classified with weld metal(W.M), fusion line(F.L), heat affected zone(HAZ), and base metal(B.M). It has been reported that the creep characteristics on weldments having variable microstructures could be unpredictably changed. Furthermore, it is also known that HAZ adjacent to F.L exhibits the decreased creep strength compared to those in base or weld metals, and promotes the occurrence of Type III and Type IV cracking due to the growth of grains and the coarsening carbides precipitated in ferritic matrix by welding and PWHT processes. However, the lots of works reported up to date on creep damage in power plant components have been mostly conducted on B.M and the creep properties on a localized microstructures in weldments have not as yet been throughly investigated. In this paper, for various microstructures such as coarse grain HAZ(CGHAZ), W.M and B.M in X20CrMoV121 steel weldment, the small punch-creep(SP-Creep) test using miniaturized specimen(t=0.5mm, 0.25mm) is performed to investigate a possibility for creep characteristics evaluation.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.582-585
• /
• 2016

ALOHA, PHAST 등의 사고영향평가 프로그램들을 활용하여 전기 전자 등의 산업 분야에서 많이 쓰이며 인체에 유독한 HF 가 누출되는 사고의 발생 시 대피해야 하는 초기 이격거리에 대한 연구를 수행하였다. 다양한 공정조건과 상태로 저장되어 있는 HF의 사고시나리오를 간단하게 정의하기는 어렵지만 화학물질안전원의 지침대로 10분 내 총 저장량 누출을 최악의 시나리오, 결속된 배관의 일부 파열을 대안의 시나리오로 하여 비상상황을 가정하였다. 그로부터 사고모델링의 시작인 누출속도 산정을 한 후 보수적으로 확산모델링을 적용하여 밤과 낮의 대표적인 기상상태에 따라 일반적인 대피거리로 권고되는 ERPG-2 농도가 도달하는 끝점거리를 구하여 현장에서 신속하게 쓸 수 있는 간단한 그래프와 같은 형태로 제시하였다. 이는 유사시를 대비한 사전적인 성격의 그래프로 화학물질 누출사고 시 신속한 비상대응계획을 수립하는 데 도움이 될 것이다.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.30-30
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen(l0×10×0.5mm). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at 600℃. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.754-761
• /
• 2002

It has been reported that the creep characteristics on weldment which is composed of weld metal(W.M), fusion line(F.L), heat-affected zone(HAZ), and base meta(B.M) could be unpredictably changed in severe service conditions such as high temperature and high pressure. However, the studies done on creep damage in power plant components have been mostly conducted on B.M and not the creep properties of the localized microstructures in weldment have been thoroughly investigated yet. In this paper, it is investigated the creep characteristics for three microstructures like coarse-grain HAZ(CGHAZ), W.M, and B.M in X20CrMoV121 steel weldment by the small punch-creep-(SP-Creep) test using miniaturized specimen($10{\times}10{\times}0.5mm$). The W.M microstructure possesses the higher creep resistance and shows lower creep strain rate than the B.M and CGHAZ. In the lower creep load the highest creep strain rate is exhibited in CGHAZ, whereas in the higher creep load the B.M represents the high creep strain rate. The power law correlation for all microstructures exists between creep rate and creep load at $600^{\circ}C$. The values of creep load index (n) based on creep strain rate for B.M, CGHAZ, and W.M are 7.54, 4.23, and 5.06, respectively and CGHAZ which shows coarse grains owing to high welding heat has the lowest creep loade index. In all creep loads, the creep life for W.M shows the highest value.

• Nuclear Engineering and Technology
• /
• 제27권1호
• /
• pp.53-66
• /
• 1995

현재 사용중인 Non-LOCA 해석용 인허가 코드들은 특정한 형태의 가압경수로에 맞게 짜여진 것들이어서 모든 형태의 가압 경수로에 적용할 수 있는 범용 코드의 개발이 필요한 실정이다. 이를 위하여 한국원자력연구소에서는 웨스팅하우스 및 CE형 발전소에 공히 적용할 수 있는 과도현상 해석 코드인 TASS 로드를 개발하고있다. 이 TASS 코드는 실시 간 보다 빠르게 핵증기계통에 대한 모의 계산을 수행하며 대화식의 입출력을 통하여 사용자가 원하는 과도현상을 정확히 모사할 수 있다. 본 논문에서는 웨스팅하우스형 발전소에 대하여 TASS 코드를 적용하여 Non-LOCA 인허가 해석을 하기 위한 검증을 위해, 교류 전원 상실사고와 부하상실사고에 대하여 발전소 실측자료와의 비교계산을 수행하였고 주급수관 파단사고, 펌프축 고착사고, 증기발생기 세관 파열사고 및 주증기관 파단사고들에 대하여 대형코드인 RELAP5 /MOD3 코드와의 비교계산을 수행하였다.

• Journal of Gastric Cancer
• /
• 제17권4호
• /
• pp.354-362
• /
• 2017

Purpose: Laparoscopic gastrectomy is accepted as a standard treatment for patients with early gastric cancer in Korea, Japan, and China. However, duodenal stump leakage remains a fatal complication after gastrectomy. We conducted a prospective phase II study to evaluate the safety of the new technique of laparoscopic reinforcement suture (LARS) on the duodenal stump. Materials and Methods: The estimated number of patients required for this study was 100 for a period of 18 months. Inclusion criteria were histologically proven gastric adenocarcinoma treated with laparoscopic distal or total gastrectomy and Billroth II or Roux-en-Y reconstruction. The primary endpoint was the incidence of duodenal stump leakage within the first 30 postoperative days. The secondary endpoints were early postoperative outcomes until discharge. Results: One hundred patients were enrolled between February 2016 and March 2017. The study groups consisted of 65 male and 35 female patients with a mean age (years) of 62.3. Of these, 63 (63%) patients had comorbidities. The mean number of retrieved lymph nodes was 38. The mean operation time was 145 minutes including 7.8 minutes of mean LARS time. There was no occurrence of duodenal stump leakage. Thirteen complications occurred, with one case of reoperation for splenic artery rupture and one case of mortality. Conclusions: Based on the results of this prospective phase II study, LARS can be safely performed in a short operation period without development of duodenal stump leakage. A future randomized prospective controlled trial is required to confirm the surgical benefit of LARS compared to non-LARS.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.225-231
• /
• 2019

우리나라의 경우 지상에 설치된 고압 천연가스 배관과 건축물 간의 최소 이격거리는 가스기술기준(KGS code)에 의해 규제된다. 이 논문을 통해 이러한 최소 이격거리를 관련된 KGS 코드를 개정한 기술적 근거를 보여주고자 한다. 이격거리를 설정하는 접근 방법으로 합리적 사고 시나리오에 의한 피해기반 접근법을 적용하였는데 배관에 부착된 1인치 분기 라인이 파손되어 제트화재가 발생한 시나리오를 선정하였다. 여기서 공업지역에 종사하는 작업자에 대해 비공업지역에 있는 사람들보다 더 높은 허용가능 복사열 플럭스를 적용하였다. 그 이유는 공업지역에 종사하는 근로자는 일반 대중들 보다 더 짧은 시간 안에 비상 대피가 가능하기 때문이다. 이 사고 시나리오에 대한 피해영향 분석 결과로부터 지상에 설치된 고압 천연가스 배관과 건축물 간의 최소 이격거리로서 비공업지역에서는 30 m, 공업지역에서는 15 m로 KGS 코드 개정을 제안하였다. 코드 개정안은 KGS 코드 위원회(가스기술기준위원회)에 채택되어 현재 시행 중이다.

• 한국압력기기공학회 논문집
• /
• 제14권2호
• /
• pp.77-87
• /
• 2018

In the case of high-energy line breaks in nuclear power plants, supersonic steam jet is formed due to the rapid depressurization. The steam jet can cause impingement load on the adjacent structures, piping systems and components. In order to secure the design integrity of the nuclear power plant, it is necessary to evaluate the load characteristics of the steam jet generated by high-energy pipe rupture. In the design process of nuclear power plant, jet impingement load evaluation was usually performed based on ANSI/ANS 58.2. However, U.S. NRC recently pointed out that ANSI/ANS 58.2 oversimplifies the jet behavior and that some assumptions are non-conservative. In addition, it is recommended that dynamic analysis techniques should be applied to consider transient load characteristics. Therefore, it is necessary to establish an evaluation methodology that can analyze the dynamic load characteristics of steam jet ejected when high energy pipe breaks. This research group has developed and validated the CFD analysis methodology to evaluate the transient behavior of supersonic impinging jet in the previous study. In this study, numerical study on the transient load characteristics of supersonic steam jet impingement was carried out and amplitude and frequency analysis of transient jet load was performed.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.253-264
• /
• 2019

This study characterized the chemical compounds in tannin from mangium (Acacia mangium) bark extract and determined the physical-mechanical properties of glued laminated timber (glulam) made from sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), and mangium wood. The adhesives used to prepare the glulam were based on mangium tannin and phenol resorcinol formaldehyde resin. Five-layer glulam beams measuring $5cm{\times}6cm{\times}120cm$ in thickness, width, and length, respectively, were made with a glue spread of $280g/m^2$ for each glue line, cold pressing at $10.5kgf/cm^2$ for 4 h and clamping for 20 h. Condensed mangium tannin consisted of 49.08% phenolic compounds with an average molecular weight of 4745. The degree of crystallinity was 14.8%. The Stiasny number was 47.22%. The density and the moisture content of the glulams differed from those of the corresponding solid woods with mangium having the lowest moisture content (9.58%) and the highest density ($0.66g/cm^3$). The modulus of rupture for all glulam beams met the JAS 234-2003 standard but the modulus of elasticity and the shear strength values did not. Glulam beams made with tannin had high delamination under dry and wet conditions, but glulam made from sengon and jabon wood met the standard's requirements. All glulam beams had low formaldehyde emissions and were classified as $F^{****}$ for formaldehyde emissions according to the JAS 234 (2003) standard.