• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.170-170
• /
• 2000

This paper deals with on-Line detection of strip movement and real time positioning of brackets of EMD connected with it. Strip movement is detected by 4 line CCD camera and measured position correction value is inputted to motor position controller to control position of brackets.

• Journal of Korea Multimedia Society
• /
• v.14 no.6
• /
• pp.719-729
• /
• 2011

This paper presents a research on the fast and accurate method of line detection in the image of a wireless mobile robot (WMR). For the improvement of the processing time to detect lines, the characteristics of the transmitted image from the WMR was analyzed, and the efficient preprocessing method among the existing preprocessing methods was selected. And for the improvement of the accuracy to detect lines, the selection method of local maximum value at the Hough array (HA) which has the result of Hough transform was improved by designing a mask and applying it to HA. The experiment was performed with acquired images from the WMR, and the proposed method outperformed the existing methods in terms of processing time and line detection.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.174-180
• /
• 2005

Points of sharp variations in image are the most important components when we analyze the features of image. And they include a variety of information about image's shape and location etc. So a lot of researches for detecting edges have been continued. Edge detection operators which were used at the early stage of the research were to utilize relations among neighboring pixels. These methods detect edge at all boundaries, therefore they perform edge detection twice about curves below some width such as line-edge. In the meantime, wavelet transform which is presented as a new technique of signal processing field provides multiscale edge detection and is being applied widely in many fields that analyze edge-like characteristic. Therefore, in this paper we detected line-edge with new 2-D wavelet function which is independent of line's width.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.22-27
• /
• 2012

Correct and fast detection of a micro-grid (MG) islanding is essential to the MG since operation, control and protection of the MG depend on an operating mode i.e., an interconnected mode or an islanding mode. When islanding occurs, the frequency of the point of common coupling (PCC) is not the nominal frequency during the transient state owing to the frequency rise or drop of generators in the MG. Thus, the active and reactive power calculated by the frequency domain based method such as Fourier Transform might contain some errors. This paper proposes an islanding detection algorithm for the MG based on the instantaneous active and reactive powers delivered to the dedicated line in the time domain. During the islanding mode, the instantaneous active and reactive powers delivered to the dedicated line are constants, which depend on the voltage of the PCC and the impedance of the dedicated line. In this paper, the instantaneous active and reactive powers are calculated in the time domain and used to detect islanding. The performance of the proposed algorithm is verified under various scenarios including islanding conditions, fault conditions and load variation using the PSCAD/EMTDC simulator. The results indicate that the algorithm successfully detects islanding for the MG.

• Plant Journal
• /
• v.16 no.4
• /
• pp.33-39
• /
• 2020

For several decades, productivity in construction industry has been regressed and it is inevitable to improve productivity for major EPC players. One of challenges to achieve this goal is automatically extracting information from imaged drawings. Although computer vision technique has been advanced rapidly, it is still a problem to detect pipe lines in a drawing. Earlier works for line detection have problems that detected line elements be broken into small pieces and accuracy of detection is not enough for engineers. Thus, we adopted Contour and Hough Transform algorithm and reinforced these to improve detection results. First, Contour algorithm is used with Ramer Douglas Peucker algorithm(RDP). Weakness of contour algorithm is that some blank spaces are occasionally found in the middle of lines and RDP covers them around 17%. Second, HEC Hough Transform algorithm, we propose on this paper, is improved version of Hough Transform. It adopted iteration of Hough Transform and merged detected lines by conventional Hough Transform based on Euclidean Distance. As a result, performance of Our proposed method improved by 30% than previous.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.822-831
• /
• 2003

A computer-vision based pipe-inspection algorithm is developed. The algorithm uses the modified Hough transformation and a line-scanning approach to identify the edge line and the radius of the pipe image, from which the eccentricity and dimension of the pipe-end is calculated. Line and circle detection was performed using Laplace operator with input image, which are acquired from the front and side cameras. In order to minimize the memory usage and the processing time, a clustering method with the modified Hough transformation is introduced for line detection. The dimension of inner and outer radius of pipe is calculated by the proposed line-scanning method. The method scans several lines along the X and Y axes, calculating the eccentricity of inner and outer circle, by which pipes with wrong end-shape can be classified and removed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.157-160
• /
• 2008

A realization for moving object detecting and tracking system in two dimensional plane using stereo line CCDs and lighting source is presented in this paper. Instead of processing camera images directly, two line CCD sensor and input line image is used to measure two dimensional distance by comparing the brightness on line CCDs. The algorithms are used the moving object tracking and coordinate converting method. To ensure the effective detection of moving path, a detection algorithm to evaluate the reliability of each measured distance is developed. The realized system results are that the performance of moving object recognizing shows 5mm resolution and mean error is 1.89%, and enables to track a moving path of object per 100ms period.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.11
• /
• pp.1855-1862
• /
• 2016

Cronobacter sakazakii (C. sakazakii) is a foodborne pathogen, posing a high risk of disease to infants and immunocompromised individuals. In order to develop a quick, easy, and sensitive assay for detecting C. sakazakii, a rabbit anti-C. sakazakii immunoglobulin G (IgG) was developed using sonicated cell protein from C. sakazakii. The developed anti-C. sakazakii (IgG) was of good quality and purity, as well as species-specific. The developed rabbit anti-C. sakazakii IgG was attached to the surface of a sulforhodamine B-encapsulated liposome to form an immunoliposome. A test strip was then prepared by coating goat anti-rabbit IgG onto the control line and rabbit anti-C. sakazakii IgG onto the test line, respectively, of a plastic-backed nitrocellulose membrane. A purple color signal both on the test line and the control line indicated the presence of C. sakazakii in the sample, whereas purple color only on the control line indicated the absence of C. sakazakii in the sample. This immunochromatographic strip assay could produce results in 15 min with a limit of detection of $10^7CFU/ml$ in C. sakazakii culture. The immunochromatographic strip assay also showed very good specificity without cross-reactivity with other tested Cronobacter species. Based on these results, the developed immunochromatographic strip assay is efficient for the detection of C. sakazakii and has high potential for on-site detection.

• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.47-53
• /
• 2014

Despite the automatic fire alarm system, according to the national fire data system of national emergency management agency, the fires account for 40,932 incidents, 2,184 injuries and about 430 billion won in property losses in 2013. Since the conventional automatic fire alarm system has several weaknesses related to electrical signal such as noise, surge, lighting, etc. Most fires are mainly caused by electrical faults, mechanical problem, chemical, carelessness and natural. The electrical faults such as line to ground fault, line to line fault, electrical leakage and arc are one of the major problems in fire. This paper describes the development of a novel real-time fire monitoring system algorithm including fault detection function which puts the existing optic smoke and heat detectors for fire detection with current and voltage sensors in order to utility fault monitoring using high accuracy DAQ measurement system with LabVIEW program. The fire detection and electrical fault monitoring with a proposed a new detection algorithm are implemented under several test. The fire detection and monitoring system operates according to the proposed algorithm well.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.668-670
• /
• 1999

We have developed a automatic surface inspection system for cold Rolled strips in steel making process for several years. We have experienced the various kinds of surface inspection systems, including linear CCD camera type and the laser type inspection system which was installed in cold rolled strips production lines. But, we did not satisfied with these inspection systems owing to insufficient detection and classification rate, real time processing performance and limited line speed of real production lines. In order to increase detection and computing power, we have used the Dark Field illumination with Infra_Red LED, Bright Field illumination with Xenon Lamp, Parallel Computing Processor with Area typed CCD camera and full software based image processing technique for the ease up_grading and maintenance. In this paper, we introduced the automatic inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms. As a result of experiment, under the situation of the high speed processed line(max 1000 meter per minute) defect detection is above 90% for all occurred defects in real line, defect name classification rate is about 80% for most frequently occurred 8 defect, and defect grade classification rate is 84% for name classified defect.