• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.2
• /
• pp.39-50
• /
• 2000

Thermodynamic cycle analysis is presented to estimate the maximum liquefaction rate of hydrogen for various systems using a Gifford-McMahon(GM) cryocooler. Since the present authors` previous experiments showed that the gaseous hydrogen was liquefied approximately at the rate of 5.1 mg/s from the direct contact with a commercial two-stage GM refrigerator, this study has been proposed to predict how much the liquefaction rate can be increased in different configurations using the GM cooler and with improved heat exchangers. The optimal operating conditions have been analytically sought with real properties of normal hydrogen for the Linde-Hampson(L-H) system precooled by single-stage GM, the direct-contact system with two-stage GM, the L-H system precooled by two-stage GM, and the direct-contact system with helium GM-JT (Joule-Thomson). The maximum liquefaction rate has been predicted to be only about 7 times greater than the previous experiment, even though the highly effective heat exchangers may be employed. It is concluded that the liquefaction rate is limited mainly because of the cooling capacity of the commercially available GM cryocoolers and a practical scale of hydrogen liquefaction is possible only if the GM cooler has a greater capacity at 70-100 K.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.1
• /
• pp.11-20
• /
• 2019

The purpose of this study was to analyze the status of conservation and management of KIAHS(Korea's Important Agricultural Heritage System) by focusing on which of the conceptual and institutional characteristics and stakeholder activities, and to suggest improvement plans. The results were summarized as follows, first, insiders prioritize financial support and participate in plan execution and activities. Second, rural utilization and traditional agricultural succession activities and support are deficient. Third, administrators (intermediary) focuses primarily on KIAHS designation; ordinance enactment, manpower recruitment and other structural considerations are lacking. Fourth, the role of administrators (intermediary) is limited to operational funding and facility management support at the enforcement and activity stage. Fifth, outsiders besides visitors, such as the public or business enterprises, lacked participation methods. For the sustainable KIAHS, municipality must perceive agricultural heritage as a resource and recognize the importance, and treat it accordingly. The establishment of local-led conservation activities and movements must be considered in an enhanced investigation and excavation stage. The complementary policies that ensure continual support from experts from the first investigation and excavation stage to the final monitoring stage are necessary. The standards and regulations are necessary to achieve parity between conservation and maintenance of agricultural heritage, and its utilization.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.3
• /
• pp.35-47
• /
• 2022

The study is to analyze the role of highschool youth group in a rural regeneration project. The process of youth group becoming subjective in resident participation plan was classified into isolation reduction, self-awareness, perspective-taking, subjectivity practice, and opinion expression. Isolation reduction is a stage in which youth group is gradually drawn into the community from a limited society of home and school, self-awareness is a stage in which they discover their thoughts, and view perspective-taking is a stage in which they objectify themselves and surroundings through communication with other members of the region, social experiment was analyzed as a practice of subjectivity that experiences leadership guiding the local community independently, and expressing opinions is a stage of representing the region and giving responsibility for the specific issue of the implementation plan. The study is also an analysis of how residents committee, local governments, and local research institutes perform both regeneration and community revitalization in rural areas. Therefore, the analysis of the cooperative organization of these institutions was conducted simultaneously. The leadership program was effectively linked to the project of rural regeneration. Since high school students themselves are family members of the local people, the process of accepting the project is unaffected, and the feasibility of the project is also increased, such as forming a positive atmosphere for the project and easing resistance to minority opinions.

• Journal of Environmental Science International
• /
• v.31 no.2
• /
• pp.131-139
• /
• 2022

This study aimed to evaluate the effects of four types of environmental enrichment on the improvement of companion dogs' behavioral problems due to separation anxiety. A total of 21 dogs of various breeds were included in the study. Data were collected to investigate the behaviors associated with anxiety in dogs, including vocalization, elimination, escape attempts, and destructiveness. A first stage, in which the dog and owner were together (P0), lasted 15 min, and a second stage, in which the dog and owner were separated (P1), lasted 15 min. After the dog and owner were separated (P1), the third stage (P2), during which the environment was enriched, lasted 20 min, and the fourth stage, following environment enrichment (P3), lasted 15 min. The results of the study indicated that compared to P0, the frequency of problematic behavior was highest during the 15 min following separation from the owner (P1). Following environmental enrichment, the average frequency of problematic behaviors in P2 decreased (P < 0.001) compared to P1. Environmental enrichment can also be used appropriately in the case of companion dogs, including shelter dogs or experimental dogs that use a limited kennel, and is a particularly effective means of improving the quality of life of dogs.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.198-204
• /
• 1993

The study is concerned with finite element analysis and design of axisymmetric deep drawing by local heating. When the bottom shape of a cup is not flat but in complex-shaped, i.e., hemispherical, the cup cannot be drawn in one or two processes in the conventional deep drawing process and the limit drawing ratio is limited as well. By introducing local heating selectively with regards to the heating position, the formability of the sheet metal can be greatly increased with the reduced number of processes. In the Process analysisthe rigid- viscoplastic finite element method is employed and the temperature effect is incorporated. Bishop's step-wise decoupled method is employed to analyze the thermomechanical interaction between deformation and heat transfer. Axisymmetric deep drawing of a hemisphere-bottomed cup has been analyzed for various combinations of heat application in the punch and the die. At the first stage of deep drawing stretch forming is practically carried out by firmly pressing the blankholder with the punch and the die heated at various levels of temperature. Then at the second stage the same cup is drawn for the saame or different combination of temperature. From the computation, it has thus been shown that the fromability of a cup is greatly increased in two-stage deep drawing with increased limet drawing ratio.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.291-297
• /
• 2016

Patients with $Sj{\ddot{o}}gren^{\prime}s$ syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony, and limited space for restoration may occur. However, ideal occlusion is obtained in both centric and eccentric relation by regaining the disocclusion of the posterior teeth through the anterior and lateral guidance using twin-stage method. In this case, rehabilitation was performed for a $Sj{\ddot{o}}gren^{\prime}s$ syndrome patient with maxillary and mandibular incisor's severe attrition and teeth discoloration by using twin-stage method.

• Journal of Chest Surgery
• /
• v.32 no.11
• /
• pp.1009-1016
• /
• 1999

Background: Minimally invasive direct coronary artery bypass surgery(MIDCAB) has been increasing in interest along with the new techniques in myocardial immobilization for easier and safer procedures. Until the opening of the era of new techniques, adequate accuracy and good patency of grafts were debatable. Our experiences of MIDCAB were studied according to the stages of technical developments. Material and Methods: Since March 1996, 55 patients have undergone MIDCAB procedures. The patients of off-pump CABG(no cardiopulmonary bypass under full sternotomy) were excluded from the study. In the early experience(Stage I), a left anterior small thoracotomy through the left parasternal incision was performed(n=6); then an approach through the lower partial sternotomy was used(Stage II, n=33); and recently, a chest wall elevator for harvesting the internal thoracic artery and the foot plate for myocardial immobilization have been used(USSC, Norwalk, CT)(Stage III, n=16). Result: The surgical procedures of four patients in the Stage II group have been converted to conventional bypass because of the deeply seated left anterior descending coronary artery in two patients, fracture of the calcific lesion in the right coronary artery in one patient, and a cardiogenic shock during hypothermia in the other patient with ventricular dysfunction. Two patients in stage II experienced symptomatic recurrences after surgery and restenosis was verified on angiocardiography. They were managed by interventional procedures. All the other patients were doing well without symptoms, except one patients in Stage II who underwent PTCA procedure for a lesion in the circumflex artery during the follow up period. Conclusion: The new and specialized devices are essential to the development of MIDCAB surgery. MIDCAB and the hybrid procedures in multi-vessel disease are on the way to further development. So far, our experience is limited only to a single device among the many new devices for the purpose.

• Structural Engineering and Mechanics
• /
• v.67 no.1
• /
• pp.93-104
• /
• 2018

The seismic behavior of reinforced concrete (RC) short columns with limited transverse reinforcement is investigated in this paper through an experimental program. The experimental program consists of four small-scale RC columns with an aspect ratio of 1.7, which are tested to the axial failure stage. The cracking patterns, hysteretic responses, strains in reinforcing bars, displacement decomposition and cumulative energy dissipation of the tested specimens are reported in detail in the paper. The effects of column axial load are investigated to determine how this variable might influence the performance of the short columns with limited transverse reinforcement. Brittle shear failure was observed in all tested specimens. Beneficial and detrimental effects on the shear strength and drift ratio at axial failure of the test specimens due to the column axial load are found in the experimental program, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7C
• /
• pp.584-591
• /
• 2012

Distributing a Certificate Revocation List (CRL) quickly to all vehicles in the system requires a very large number of road side units (RSUs) to be deployed. In reality, initial deployment stage of vehicle networks would be characterized by limited infrastructure as a result in very limited vehicle to infrastructure communication. However, every vehicle wants the most recent CRLs to protect itself from malicious users and malfunctioning equipments, as well as to increase the overall security of the vehicle networks. To address this challenge, we design and implement a nomadic device based CRL acquisition method using nomadic device's communication capability with cellular networks. When a vehicle could not directly communicate with nearby RSUs, the nomadic device acts as a security mediator to perform vehicle's security functions continuously through cellular networks. Therefore, even if RSUs are not deployed or sparsely deployed, vehicle's security threats could be minimized by receiving the most recent CRLs in a reasonable time.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.4
• /
• pp.87-100
• /
• 2009

The quality of early cost estimates is critical to the feasibility analysis and budget allocation decisions for public capital projects. Various researches have been attempted to develop cost prediction models in the early stage of a construction project. However, existing studies are limited on its applicability to actual projects because they focus primarily on a specific phase as well as utilize restricted information while the amount of information collectable differs from one another along with the project stages. This research aims to develop two-staged cost estimation model for the schematic planning and preliminary design process of a construction projects, considering the available information of each phase. In the schematic planning stage where outlined information of a project is only available, the Case-Based Reasoning model is used for easy and rapid elicitation of a project cost based on the extensive database of more than 90 actual highway construction projects. Then, the representing quantity-based model is proposed for the preliminary design stage where more information on the quantities and unit costs are collectable based on the alternative routes and cross-sections of a highway project. Real case studies are used to demonstrate and validate the benefits of the proposed approach. Through the two-stage cost estimation system, users are able to hold a timely prospect to presume the final cost within the budge such that feasibility study as well as budget allocation decisions are made on effectively and competitively.