• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.245-253
• /
• 2015

The performance of $TiO_2$ photo-catalytic oxidation process is significantly dependent on the amount of hydroxyl radicals produced during the process, and it is an essential prerequisite to quantify its production. However, precise and accurate methods for quantification of hydroxyl radicals have not been developed so far. For this reason, this study was initiated to compare existing methods for analysis of hydroxyl radicals produced by $TiO_2$ photo-catalytic oxidation and to propose a new method to overcome the limitation of established methods. To simulate $TiO_2$ photo-catalytic oxidation process, Degussa P25 which has been widely used as a standard $TiO_2$ photo-catalyst was used with the dose of 0.05 g/L. The light source of process was UVC mercury low-pressure lamp (11 W, $2,975mW/cm^2$). The results indicate that both potassium iodide (KI)/UV-vis spectrometer and terephthalic acid (TPA)/fluorescence spectrometer methods could be applied to qualitatively measure hydroxyl radicals via detection of triiodide ion ($I_3{^-}$) and 2-hydroxyterephthalic acid which are produced by reactions of iodine ion ($I^-$) and TPA with hydroxyl radicals, respectively. However, it was possible to quantitatively measure hydroxyl radicals using TPA method coupled with high-performance liquid chromatograph (HPLC). The analytical results using TPA/HPLC method show that hydroxyl radical of 0.013 M was produced after 8 hours operation of photo-catalytic oxidation under specific experimental conditions of this study. The proposed method is expected to contribute to precise the evaluation of the performance of photo-catalytic oxidation process.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.354-365
• /
• 1993

The purpose of this investigation is to point out the physical fixation and stability of banking slopes of forest roads by invasion of trees. We investigated the situations of sediment discharge and coverage of invaded trees at banking slopes of forest roads. The coverage of invaded trees were calculated from crown injection based on the stable slope and was compared with length of slope, slope gradient, and passage years after construction of forest road. 1. We investigated on the sediment discharge and the invasion of trees at banking slopes, which were actually observed 8 forest roads of Kyonggi-Do and Kangwon-Do. 2. There was no physical stability of the banking slope due to the surface erosion and slope failure, but the tree invasions were active at the stable plots. 3. The length of slope was constructed to 4.0m to 61.0m and recent forest road was mainly constructed to the slopes longer than 30m. There was strong regional effect between the length of slope and the coverage of invaded trees and the above two factors were inversely proportional to each other. 4. There was no significant relationship between the slope gradient and the coverage of invaded trees and the slope constructed within the angle of repose showed the relatively high coverage of invaded trees. 5. There was no significant relationship between the passage years and the coverage of invaded trees in the same investigative region after the construction of forest road. But there was a gradually increasing relationship of tree invasion between above two factors. However, there was some limitation to expect the invasion of the tree species. 6. In the light of the above results, we suggest that the construction of forest road may need foundation work and vegetation work simultaneously for the physical stability to make the environment of tree plantation and that the reasonable increase of construction cost of forest road may be prior to the other factors.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.2
• /
• pp.20-30
• /
• 2013

'Paulownia tree', one of a tree species which has been with human civilization, has been widely used as a garden plant. The purpose of this study is to investigate concrete species of 'paulownia tree,' which had been planted in Korean traditional garden, the position of plantation, and consider its usefulness therefrom. The results of the study can be summarized as follows. 1. As the result of considering old literatures as encyclopedia, agricultural book (農書), gardening book, etc., there's a difference in the description of 'paulownia tree' depending on the complier, as well, the classification of concrete species is quite ambiguous. Therefore, it judged a limit which is planted based on point of the compass is not apply to species of tress of paulownia tree. Merely, the point of suitability and evasion(宜忌) related to the plantation of 'paulownia tree' could be identified in "Jeungbosanrimgyeongje(增補山林經濟) and "Imwongyeongjeji(林園經濟志)", not "Sanrimgyeongje (山林經濟)". 2. It could be confirmed again through poetry and prose which describe old garden that the words such as 'O(梧)', 'Dong(桐)', 'Odong(梧桐)', etc. were used without significant division. However, it is supposed that the species 'Odong' which was actually adopted at the garden might be Catalpa as well including Korean Paulownia and Chinese parasol tree. 3. It is considered that the reference point of suitability and evasion(宜忌) regarding 'paulownia tree' plantation was not generally applied. That is, species of paulownia tree was not divided for planting according to direction, as well, they seemed to willingly plant paulownia trees nearby the house as well, e.g. front yard or nearby yard, etc. 4. The usefulness of paulownia tree as a garden plant of an old garden played a role of 'the messenger of fall,' emphasizing a sense of the season. 5. Paulownia tree has another usefulness as a tree which adds an Ephemeral landscape. Therefore, the ancient people considered 'paulownia tree' that goes with 'the moon' the best, and enjoyed the quaint beauty of those two are juxtaposed. Also, 'paulownia tree' was utilized as a tree which adds an atmosphere of a rainy day, such as enjoying the sound of rain dropping on the 'paulownia tree', etc. The limitation of this study is that the research was performed being restricted to the translation among lots of Chinese references. Later-on task of research is the necessity of a more in-depth study through the discover of new historical sources and the accumulation of translation outcome.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.9
• /
• pp.512-522
• /
• 2003

For a time-multiplexed FPGA, a circuit is partitioned into several subcircuits, so that they temporally share the same physical FPGA device by hardware reconfiguration. In these architectures, all the hardware reconfiguration information called contexts are generated and downloaded into the chip, and then the pre-scheduled context switches occur properly and timely. Typically, the size of the chip required to implement the circuit depends on both the maximum number of the LUT blocks required to implement the function of each subcircuit and the maximum number of micro-registers to store results over context switches in the same time. Therefore, many partitioning or synthesis methods try to minimize these two factors. In this paper, we present a new estimation technique to find the lower bound on the number of micro-registers which can be obtained by any synthesis methods, respectively, without performing any actual synthesis and/or design space exploration. The lower bound estimation is very important in sense that it greatly helps to evaluate the results of the previous work and even the future work. If the estimated lower bound exactly matches the actual number in the actual design result, we can say that the result is guaranteed to be optimal. In contrast, if they do not match, the following two cases are expected: we might estimate a better (more exact) lower bound or we find a new synthesis result better than those of the previous work. Our experimental results show that there are some differences between the numbers of micro-registers and our estimated lower bounds. One reason for these differences seems that our estimation tries to estimate the result with the minimum micro-registers among all the possible candidates, regardless of usage of other resources such as LUTs, while the previous work takes into account both LUTs and micro-registers. In addition, it implies that our method may have some limitation on exact estimation due to the complexity of the problem itself in sense that it is much more complicated than LUT estimation and thus needs more improvement, and/or there may exist some other synthesis results better than those of the previous work.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2018

As part of a research dedicated to the field evaluation of the durability of concrete subjected to freezing-thawing, this study analyzes the relationship between the surface roughness and the relative dynamic elastic modulus through image analysis. Four mix compositions with water-to-binder ratios (W/B) of 40%, 50%, 60% and 70% and without AE agent were considered to provoke early freezing. The basic physical properties of the mixes including the relative dynamic elastic modulus and the compressive strength were first evaluated experimentally according to W/B. Then, tests were performed to measure the surface roughness followed by photographs and SEM image analysis. The measured surface roughness tended to increase with larger number of freezing-thawing cycles regardless of W/B. The relative dynamic elastic modulus appeared to increase gradually with the number of cycles for the relatively denser mixes with W/B of 40% and 50%. Besides, the surface roughness increased only at rupture for the mixes with W/B of 60% and 70%. Moreover, the analysis of the photographs of the surface of the mixes with W/B of 40% and 50% revealed that the degradation progressed gradually from the surface with the freezing-thawing cycles. However, for the mixes with W/B of 60% and 70%, apparent change of the surface remained very insignificant until rupture at which damage like cracking could be observed. Consequently, the analysis of surface photograph or the measurement of the surface roughness presented some limitation in assessing the degree of freezing-thawing-induced degradation in case of relatively porous specimens. On the other hand, the photograph and surface roughness appeared to be sufficient for assessing such degradation for the mixes with W/B of 40% and 50%. Accordingly, the image of the surface and the surface roughness are potentially applicable on site for the assessment of freezing-thawing damages in relatively dense mixes.

• Journal of Distribution Research
• /
• v.5 no.2
• /
• pp.49-68
• /
• 2001

In this chapter, we summarize the results on the optimal location selection and present limitation and direction of research. In order to reach the objective, this study selected and tested the interaction model which obtains the value of co-ordinates on location selection through the optimization technique. This study used the original variables in the model, but the results indicated that there is difference in reality. In order to overcome this difference, this study peformed market survey and found the new variables (first data such as price, quality and assortment of goods, and the second data such as aggregate area, and area of shop, and the number of cars in the parking lot). Then this study determined an optimal variable by empirical analysis which compares an actual value of market share in 1988 with the market share yielded in the model. However, this study found the market share in each variables does not reflect a reality due to an assumption of λ-value in the model. In order to improve this, this study performed a sensitivity analysis which adds the λ value from 1.0 to 2.9 marginally. The analyzed result indicated the highest significance with the market share ratio in 1998 at λ of 1.0. Applying the weighted value to a variable from each of the first data and second data yielded the results that more variables from the first data coincided with the realistic rank on sales. Although this study have some limits and improvements, if a marketer uses this extended model, more significant results will be produced.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.4
• /
• pp.1-13
• /
• 2019

Recently, as the occurrence frequency of sudden floods due to climate change increased, it is necessary to install the facilities that can cope with the initial stormwater. Most researches have been conducted on the design of facilities applying the Low Impact Development (LID) and the reduction effect on rainfall runoff to examine with 1D or 2D numerical models. However, the studies on the examination about flow characteristics and stability of pipe network systems were relatively insufficient in the literature. In this study, the stability of the pipe network system in rainwater storage tank was examined by using 3D numerical model, FLOW-3D. The changes of velocity and dynamic pressure were examined according to the number of rainwater storage tank and compared with the design criteria to derive the optimal design plan for a rainwater storage tank. As a results of numerical simulation with the design values in the previous study, it was confirmed that the velocity became increased as the number of rainwater storage tank increased. And magnitude of the velocity in pipes was formed within the design criteria. However, the velocity in the additional rainwater storage pipe was about 3.44 m/s exceeding the allowable range of the design criteria, when three or more additional rainwater storage tanks were installed. In the case of turbulence intensity and bottom shear stress, the bottom shear stress was larger than the critical shear stress as the additional rainwater storage was increased. So, the deposition of sediment was unlikely to occur, but it should be considered that the floc was formed by the reduction of the turbulence intensity. In addition, the dynamic pressure was also satisfied with the design criteria when the results were compared with the allowable internal pressure of the pipes generally used in the design of rainwater storage tank. Based on these results, it was suitable to install up to two additional rainwater storage tanks because the drainage becomes well when increasing of the number of storage tank and the velocity in the pipe becomes faster to be vulnerable to damage the pipe. However, this study has a assumption about the specifications of the rainwater storage tanks and the inflow of stormwater and has a limitation such that deriving the suitable rainwater storage tank design by simply adding the storage tank. Therefore, the various storage tank types and stormwater inflow scenarios will be asked to derive more efficient design plans in the future.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.59-67
• /
• 2004

The Shihwa constructed wetland was established for the treatment of severely polluted water from Banwoul, Donghwa and Samhwa streams. This study was focused on investigating dynamics of phytoplankton communities in open waters and periphytic algae on reed (Phragmites communis) planting area at 5 stations from October 2001 to July 2002. The concentration of T-N and T-P of inlet stations from the streams were decreased by flowed through the wetland. However, the TN/TP ratios at all stations were shown as a little over 16 indicating that the T-P will play some role as a limitation factor. Phytoplankton communities were identified as a total 413 taxa which were composed of 375 species, 21 varieties, 2 forma and 15 unidentified species. Standing crops of phytoplankton communities and chlorophyll-a concentrations ranged from $330{\sim}36,420\;cells/mL$ and $2.5{\sim}170.7\;{\mu}g/L$ respectively, and showed the decreasing tendency after flowing through the wetland at almost all stations. Dominant species were 14 taxa at all stations which were Euglena oblonga and Synura spinosa etc. Periphytic algae on the reed were a total 329 taxa which were composed of 295 species, 13 varieties, 3 forma and 17 unidentified species. The species numbers were recorded in order of Chlorophyceae-Bascillariophyceae-Cyanophyceae-Euglenophyceae-Chrysophyceae. The relative abundance (%) was showed a seasonal variation from Cyanophyceae to Bascillariophyceae and to Chlorophyceae. Chlorophyll-a concentrations, ie. the biomass of periphytic algae were ranged from $5.5{\sim}363.8\;mg/m^2$. Dominant species were 16 taxa which were Lyngbya angusta of Cyanophyceae in the early investigation, and were changed to Stigeoclonium lubricum of Chlorophyceae, and Nitzschia plea of Bacillariophyceae etc. in the late. Species number, standing crops and chlorophyll-a concentrations of phytoplankton and perphytic algae were shown higher values at the inlet stations than the stations after flowing through the wetland.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.78
• /
• pp.93-117
• /
• 2018

In all countries of the world, the development of trade is an important factor for the survival of the national economy. Increased export will lead to national economic growth. Export is directly linked to employment, and the industrial structure will be developed in the direction to produce products of comparative advantages. Therefore, every country around the world is trying to promote export regardless of the size of its economy. Accordingly, this paper focused on the promotion of export of domestic companies. It proposed to cultivate trade experts to promote export of domestic companies. The following five methods were proposed to materialize the proposal. First, it is important to foster trade experts to expand and foster the one-person creative companies. In particular, it is important to develop a professional education curriculum. It is necessary to design and conduct a systematic curriculum throughout the process including follow-up after education such as teaching detailed procedures for establishing a trade business, identification of relevant regulations and related organizations, understanding of special features of each exporting country, and details of exporting procedures through specialist training for the individual industries, helping themto keep their network steady so that they can easily get help from consultants. Second, it is necessary to educate traders working in the field to make them trade experts and utilize themin on-the-job training and consulting. To do this, it is necessary to introduce systematic consultant selection process, and to introduce a systemto educate and manage them. It is because, we must select the most appropriate candidates, educate themto be lecturers and consultants, and dispatch themto the field, in order to make the best achievement in export. Nurturing trading professionals utilizing the current trading workers to activate export of domestic companies can be more efficient through cooperation of trading education agencies and related agencies in various industries. Third, it is also proposed to cultivate female trade experts by educating female trade workers whose career has been disrupted. It is to provide career disrupted women with opportunities to work after training them as trade professionals and to give manpower pool to domestic companies that are preparing for export. Fourth, it is also proposed to educate foreign students living in Korea to be trading experts and to utilize them as trading infra. They can be trading professionals who will contribute to the promotion of export. In the short term, they will be provided with opportunities for employment and start-upin the field of trade, and in the mid- to long-term, they may develop a business network between Korea and their own countries. To this end, we need to improve the visa system, expand free trade education opportunities, and support them so that they can establish small but strong enterprises. Fifth, it is proposed to proactively expand trade education to specialized high school students. Considering that most of domestic companies pursuing activation of export are small but strong companies or small and mediumsized companies, they may prefer high school graduates rather than university graduates because of financial limitations. Besides, the specialized high school students may occupy better position in the job market if they are equipped with expertise in trading. This study can be meaningful, in that it is the first research that focuses on cultivating trading experts to contribute to the export activation of domestic companies. However, it also has a limitation that it has failed to reflect the more specific field voices. It is hoped that detailed plans will be derived from the opinions of the employees of domestic companies making efforts to become an export company in the related researches in the future.

• Cartoon and Animation Studies
• /
• s.32
• /
• pp.63-90
• /
• 2013

The purpose of this study is to improve the standards for the animation education in '2011 Arts and Culture Education Standards: Cartoon and Animation'. Animation Education Standards has been developed by discussion about Arts and Culture Education, and by study of documents about animation, and by investigation about experimental recognition. And the study of domestic and foreign art education standards are reflected in these standards. These standards consist of seven categories reflecting various aspects of animation and each category is classified into five stages by age. This standard has two axes: seven categories by various aspects of animation and five stages by age, and it represents achievement requirement in animation learning. This study suggests that 'Animation Education Standards' has five features as below. First, it reflects the character of Animation as an independent subject. Second, it is studied on the basis of the framework of arts and culture education. Third, it provides basic achievement requirement, and it has no limitation in learning activities. Fourth, the achievement requirements of two or more categories can be applied simultaneously in real classroom; each category is set by themes of animation education. This study presents five methods to improve existing standard. First, independent standard for animation education must be developed. Second, categories must be established distinctly. Third, each categories and achievement requirement must reflect unique characteristic of animation. Fourth, the description of achievement requires must be systemized. Fifth, to help to adapt education standard, explanation about practical teaching and learning activities must be added. '2011 Art and Culture Education Standards: Cartoon and Animation' is important in that it is the first study that systemized animation education and presented pedagogical achievement requirements by suggesting achievement requirements for animation education by two axes -ages and categories. It will be very helpful in studying the animation education as a subject, and developing education programs, and teaching and learning in an actual class.