• 한국ITS학회 논문지
• /
• 제22권3호
• /
• pp.116-130
• /
• 2023

고속도로는 중장거리 지역 간을 연결하는 자동차 전용도로로 철도 및 항공 수단보다 접근성과 이동성이 우수하여 화물 수송의 중추적인 역할을 담당하고 있다. 그러나 기존의 고속도로를 이용하는 화물수송실적은 차종 구분의 혼재, 개별 화물차량의 화물적재량 파악의 어려움으로 정확한 산정에 한계가 있다. 따라서 본 연구에서는 고속도로 온라인 데이터의 분석을 통하여 보다 신뢰성있는 화물수송실적 산정 방법론의 틀을 제시하고자 하였다. 자동요금징수시스템로부터 수집된 데이터를 활용하여 고속도로 구간별 통행실적(대·km/일)을 도출하였으며 차량제원정보데이터와 고속 및 저속축중기 데이터로부터 차종별 화물 적재 원단위(톤/대)를 도출하였다. 본 연구는 기존에 제시되고 있지 않은 고속도로 구간별, 차종별 화물수송실적을 산정하는데 주요 목적이 있으며, 개방식 영업소, 민자고속도로 등을 모두 연계한 수송실적산정방법을 제시하였다는데 기존 연구와의 차별성을 가진다.

• 한국지반공학회지:지반
• /
• 제12권3호
• /
• pp.73-82
• /
• 1996

하중과 저항계수 설계론을 채택하는 극한상태 설계 법이 지반공학분야에도 세계적인 추세로 적용되고 있다. 현재의 허용응력설계법은 논란을 거듭하면서 극한상태 설계법으로 교체되리라 전망된다. 최근에 북미와 유럽에서 시방서로 발간되면서 본격적으로 지반공학설계분야에 관심이 되고 있다. 이러한 세계적인 설계이론을 적절히 비교분석함은 장차 한국의 건설여건에 맞도록 적용하는데 기본요건이라 하겠다. 본 논문에서는 극한상태설계 법을 검토하고 말뚝설계에 하중과 저항계수 설계론을 적용하여 분석하고자 한다.

• 한국자동차공학회논문집
• /
• 제24권2호
• /
• pp.225-231
• /
• 2016

A military vehicle is driven at different usage modes with the army application and servicing conditions. For practical durability validation, DT(Development Test) on a new military vehicle should be run up to the durability target kilometers on test courses in the specified proving ground. Driving velocities with test courses at the endurance mode of DT are established definitely. However, OT(Operational Test) and initial endurance test of production car can't be performed only in the DT courses due to the development period limit. Therefore, this paper focuses on the method to analyze the relative road damages between the endurance test in DT and other endurance test. Road load acquisition tests on KLTV(Korean Light Tactical Vehicle) were implemented at 15 driving modes in off-road and cross-country courses of two tests. Wheel accelerations were processed through band-pass filter, and then the main frequency and maximum power of the signals were computed by PSD analysis. Finally, using the proving ground optimization based on RDS(Relative Damage Spectrum) characterization, the damage factors between off-roads of test courses were determined.

• 한국식품위생안전성학회지
• /
• 제12권2호
• /
• pp.117-124
• /
• 1997

A simple, rapid and simultaneous analytical method is described for the detection of Sulfonamide and Tetracycline residues, i.e., Sulfamerazine (SMR), Sulfamethazine (SMT), Sulfamonomethoxine (SMM), Sulfadimethoxine (SDM), Sulfaquinoxaline (SQN), Oxytetracycline (OXY), Tetracycline (TC), Chlortetracycline (CTC). Blank control and sulfonamide and tetracycline fortified fish muscle samples (0.5 f) were blended with octadecylsilyl (C18, 40 ${\mu}{\textrm}{m}$, 21% load, 60$\AA$) derivatized silica packing material (2 g). Blended fish samples were washed with hexane, then, benzene and dichloromethace were used for the elution of tetracycline and sulfonamide were analyzed by HPLC. Correlation coefficients of standard curves for individual sulfonamide and tetracycline isolated from fortified samples were linear (0.9993$\pm$0.0003~0.9997$\pm$0.0003, 0.9493$\pm$0.078~0.9753$\pm$0.036), respectively. The average percentage recoveries of sulfonamide and tetracycline ranged as 80.86~96.52% to 85.88~92.23%, and 30.01~37.12% to 65.89~73.40%, for the concentration range (0.1~1.0 ppm) examined, respectively. Limit of detection for sulfonamide was 0.0012 ppm for SMR in Paralichthys Olivacleus and 0.0020 ppm for SMR, 0.015 ppm for SMM in Cyprinus Carpio. The applicability of this procedure is demonstrated by separation and detection of incurred tetracycline and sulfonamide residues in fish muscle tissue.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.58-64
• /
• 2003

A mechanical press joining was investigated in ender for joining A1-5052 sheets for automobile body weight reduction. Static tensile and fatigue tests were conducted using tensile-shear specimens for evaluation of fatigue strength of the joint. During Tox joining process for A1-5052 plates, using the current sheet thickness and punch diameter, the optimal applied punching force was found to be 32 kN under the current joining condition. For the static tensile-shear experiment results, the fracture mode is classified into interface fracture mode, in which the neck area fractured due to influence of neck thickness, and pull-out fracture mode due to influence of plastic deformation of the joining area. And, during fatigue tests for the A1-5052 tensile shear specimens, interface failure mode occurred in the region of low cycle. The fatigue endurance limit approached to 6 percents of the maximum applied load, considering fatigue lifetime of $2.5\times10^6$ cycles.

• 복합신소재구조학회 논문집
• /
• 제1권1호
• /
• pp.27-33
• /
• 2010

Static analyses and buckling analyses were carried out for buried GFRP pipes by using finite element method. Vehicle loads, vertical and lateral soil pressures were considered as external loads, and supplying water pressure was considered as an internal load. Nine types of the factory-manufactured GFRP pipes were analyzed. Their maximum stresses and displacements were compared with the limit displacements and ultimate stress. Additionally, stress analysis on an enhanced flange, which was designed to reduce stress concentration, was performed. A cantilever analysis was carried out to know the maximum stress on the neck of the flange, which is the critical part. And a static analysis was carried for the buried flange. The test results showed that GFRP pipes were safe and stable against the external loads. And they showed that the enhanced flange decreased about 35% of the stress concentration.

• Journal of Biosystems Engineering
• /
• 제29권2호
• /
• pp.167-174
• /
• 2004

Density is a physical property which contains information relating to the internal quality of fruits and vegetables, and can be used as an index for nondestructive quality evaluation. Density sorting has been employed by farmers for some agricultural products since ancient times. In this study, an automatic density measuring system based on the platform scale or water displacement method was developed for density sorting of watermelon. It consisted of water tan, load cell, net tray, electric motor, limit switch, control system and its program. The resolution of density was 0.001 g/㎤. In order to calibrate and evaluate the accuracy, the density was measured using a balloon kept in cold water. It showed 1.002 g/㎤ which almost correspond to real density of water. Test results with 6 watermelons and 3 replications showed that the standard deviations of the dens were 0.001∼0.004 g/㎤. The relationship between density and internal quality of watermelon was investigated using the system. The densities of hollow watermelons were less than 0.950 g/㎤, it was apparent that the density of the watermelon was related to the degree of hollowness. But the soluble solid contents and internal defects could not be estimated from the density.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1088-1090
• /
• 2001

In general, Power SCR(Silicon Controlled Rectifier) is most widely used in Power Plant as well as Industrial field. It has been controlled and operated according to its own control method. Especially, in case of Power plant, it plays a major role in AVR(Automatic Voltage Regulator) or electro chlorination control circuits. Generally, they used in Analog control system at above field. But each SCR current value is different because of load unbalance or switching characteristic variations, it may cause power plant unit trip or system disorder according to SCR element burn out or bad operating condition. Therefore, in this paper a development of 3 phase current balance control unit is described, it gets over the past analog control system limit, uses DSP(Digital signal processor) had high speed response, controls SCR gate firing angle for 3 phase current balance.

• Structural Engineering and Mechanics
• /
• 제65권1호
• /
• pp.121-128
• /
• 2018

Three structure-dependent integration methods with no numerical dissipation have been successfully developed for time integration. Although these three integration methods generally have the same numerical properties, such as unconditional stability, second-order accuracy, explicit formulation, no overshoot and no numerical damping, there still exist some different numerical properties. It is found that TLM can only have unconditional stability for linear elastic and stiffness softening systems for zero viscous damping while for nonzero viscous damping it only has unconditional stability for linear elastic systems. Whereas, both CEM and CRM can have unconditional stability for linear elastic and stiffness softening systems for both zero and nonzero viscous damping. However, the most significantly different property among the three integration methods is a weak instability. In fact, both CRM and TLM have a weak instability, which will lead to an adverse overshoot or even a numerical instability in the high frequency responses to nonzero initial conditions. Whereas, CEM possesses no such an adverse weak instability. As a result, the performance of CEM is much better than for CRM and TLM. Notice that a weak instability property of CRM and TLM might severely limit its practical applications.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.327-333
• /
• 2014

Changes in the business environment in which intense and sustained growth and survival must meet a variety of customer needs (Q, C, D) and business side of the enterprise for profit structure reformation is absolutely necessary for innovation activities. So far, management of innovation in method BPR, PI, OVA, 6 Sigma, Strategic Purchasing, PPM, SCM etc. are being introduced. However, they have a limit of partial optimization and improvement-oriented techniques. So this paper studied the TPI(Total Profit Innovation) application in order to derive empirical methodology to maximize profitability for the domestic S foundry factory. To this end, long-term gains through structural analysis and intensity analysis to ensure continued growth and profitability strategy are devised through management Innovation analysis. And improvement projects was presented to solve main issues of five categories(Inventory, Sales Mix, Cost, Quality Cost, Skill and Work-load) We will expect the office productivity improvement and financial performance improvement and then continually accumulate and review the results.