• 소성∙가공
• /
• 제3권1호
• /
• pp.110-119
• /
• 1994

In this paper, a new forming process of large-size forgings of converged nozzle-shape is developed by the experimental study using the incremental forging method and combined forming method. The development of the forming process is focused on the manufacturing of large-size forgings by the press with medium load capacity. Various related processes are proposed and modelling experiments using plasticine are carried out. Thus, the incremental forging method for expanding is recommanded from the study of formability and forming load, etc. The selected process is then subjected to modelling experiments of lead and the design parameters such as preform for final process, die-width of the upper die and reduction amount of each stroke are determined. In order to verify the effectiveness of the selected process, 1/7 scale prototype experiment of the real material is carried out. Forgings of converged nozzle shape can be produced by the developed process within the limit loads and with the simple tools.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.367-382
• /
• 2015

This paper aims to conduct the reliability-based assessment of the welded joint in the orthotropic steel bridge deck by use of a mesh-insensitive structural stress (MISS) method, which is an effective numerical procedure to determine the reliable stress distribution adjacent to the weld toe. Both the solid element model and the shell element model are first established to investigate the sensitivity of the element size and the element type in calculating the structural stress under different loading scenarios. In order to achieve realistic condition assessment of the welded joint, the probabilistic approach based on the structural reliability theory is adopted to derive the reliability index and the failure probability by taking into account the uncertainties inherent in the material properties and load conditions. The limit state function is formulated in terms of the structural resistance of the material and the load effect which is described by the structural stress obtained by the MISS method. The reliability index is computed by use of the first-order reliability method (FORM), and compared with a target reliability index to facilitate the safety assessment. The results achieved from this study reveal that the calculation of the structural stress using the MISS method is insensitive to the element size and the element type, and the obtained structural stress results serve as a reliable basis for structural reliability analysis.

• 한국안전학회지
• /
• 제4권1호
• /
• pp.83-90
• /
• 1989

Recently, due to the increase of 220V distribution lines and equipments preventive measures to cope with several kinds of electric accidents is revealed as an urgent problem. This study investigates the following matters; the cause and present condition of e1ectric shock accident, the influence of electric shock on human body, the safety limit of electric shock, the method of distribution voltage, the insulation of electrical load apparatus, the teachnics of electric shock prevention and foreign materials concerned with this subject etc. This paper present the fundamental cause of electric shock and syntbetic preventive counter measure of electric shock, too.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.1-8
• /
• 1996

Recently, much attention has been paid to problems which is concerned with voltage instability phenomena and much works on these phenomena have been made. In this paper, by substituting d $P_{k}$ d $e_{k}$ ( $v^{\rarw}$= e +j f) for $P_{k}$ in conventional load flow, direct method for finging the limit of voltage stability is proposed. Here, by using the fact that taylor se- ries expansion in .DELTA. $P_{k}$ and .DELTA. $Q_{k}$ is terminated at the second-order terms, constraint equation (d $P_{k}$ d $e_{k}$ =0) and power flow equations are formulated with new variables .DSLTA. e and .DELTA.f, so partial differentiations for constraint equation are precisely calculated. The fact that iteratively calculated equations are reformulated with new variables .DELTA.e and .DELTA.f means that limit of voltage stability can be traced precisely through recalculation of jacobian matrix at e+.DELTA.e and f+.DELTA.f state. Then, during iterative process divergence may be avoid. Also, as elements of Hessian mat rix are constant, its computations are required only once during iterative process. Results of application of the proposed method to sample systems are presented. (author). 13 refs., 11 figs., 4 tab.

• 한국강구조학회 논문집
• /
• 제23권6호
• /
• pp.715-724
• /
• 2011

인장구조 시스템에서 구조물의 하중을 지지하는 인장재 사이에 삽입되어 인장력을 조절하는 장치가 턴버클이다. 인장재가 인장구조에서 중요한 부재임에도 불구하고, 현재 인장재에 발생하는 인장력을 경제적이고 간단하게 측정하기 위한 방법이 제안되지 못하였다. 그리하여 인장구조시스템에 작용하는 인장력을 측정하기 위하여 인장력 측정장치를 개발하였다. 본 논문에서는 이론해석과 유한요소해석을 바탕으로 100kN, 200kN, 300kN급 측정한계하중을 가지는 턴버클을 실험하였다. 그 결과 이론적 해석, 유한요소해석, 실험결과는 대체로 일치하는 것으로 나타났다. 또한 유한요소해석에 의한 측정용 턴버클의 극한강도를 조사해보면, 측정한계하중의 5배 이상의 과하중에서도 충분한 안전성을 확보하고 있음을 확인할 수 있었다.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.61-68
• /
• 1988

본(本) 연구(硏究)에서는 군용전차의 교량통과시 노후도(老朽度)를 비롯한 각종 저항(抵抗) 및 하중(荷重)관련 불확실량(不確實量)을 체계적으로 포함한 한계상태모형(限界狀態模型)을 유도하고, 실용적이며 진보된 2차(次)모멘트 신뢰성(信賴性) 이론(理論)을 사용하여 군용교량(軍用橋梁) 및 일반교량(一般橋梁)의 신뢰성(信賴性)에 기초한 안전도(安全度) 분석방법(分析方法)과 하중저항계수(荷重抵抗係數) 형식의 급수계산방법(級數計算方法)을 제안(提案)하였다. 본(本) 연구(硏究)에서 제안(提案)하는 안전도(安全度) 분석(分析) 및 내하급수(耐荷級數) 판정방법(判定方法)을 몇 개의 실제 교량에 적용하여 보았다. 본(本) 연구(硏究)의 결과 현행 재래식 허용응력개념에 의한 NATO 급수계산방법은 실내하력(實耐荷力) 판정(判定)이 아닌 명목적인 급수판정방법에 불과함을 알 수 있으며, 따라서 본 연구에서 제시(提示)한 신뢰성방법(信賴性方法)에 의한 안전도(安全度) 분석방법(分析方法)과 하중(荷重)-저항계수(抵抗係數)형 급수 계산방법이나 이에 대응하는 합리적인 허용응력법(許容應力法)에 의한 실내하급수(實耐荷級數) 계산방법(計算方法)의 도입이 시급하다고 본다.

• 콘크리트학회논문집
• /
• 제23권6호
• /
• pp.731-740
• /
• 2011

KCI 2007, ACI 318-08에 제시된 모멘트재분배 방법은 등분포 중력하중을 받는 연속 휨재에 대하여 검증된 방법이다. 횡하중에 의한 모멘트재분배 및 비탄성 거동은 중력하중과 전혀 다른 메커니즘을 발생된다. 이 연구에서는 기초역학에 근거하여 중력하중과 횡하중을 받는 철근콘크리트 모멘트골조의 보에 발생되는 모멘트재분배와 소성변형의 관계를 정량화하고, 이로부터 보의 소성변형능력에 근거한 모멘트재분배 설계법을 제안하였다. 제안된 모멘트재분배비는 KCI 2007, ACI 318-08 등 기존 설계기준과 마찬가지로 극한한계상태의 단면해석으로 결정되는 철근의 인장변형률로 정의된다. 또한 모멘트재분배비는 경간, 철근비, 단면강성, 변형경화 거동에 의하여 영향을 받는다. 제안된 방법을 사용하여 탄성해석으로 구한 설계모멘트를 재분배시키는 설계 가이드라인 및 예제를 제시하였다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.1-11
• /
• 2016

PURPOSES : This study estimated the load effect of a single heavy truck to develop a live load model for the design and assessment of bridges located on an expressway with a limited truck entry weight. METHODS : The statistical estimation methods for the live load effect acting on a bridge by a heavy vehicle are reviewed, and applications using the actual measurement data for trucks traveling on an expressway are presented. The weight estimation of a single vehicle and its effect on a bridge are fundamental elements in the construction of a live load model. Two statistical estimation methods for the application of extrapolation in a probabilistic study and an additional estimation method that adopts the extreme value theory are reviewed. RESULTS : The proposed methods are applied to the traffic data measured on an expressway. All of the estimation methods yield similar results using the data measured when the weight limit has been relatively well observed because of the rigid enforcement of the weight regulation. On the other hand, when the estimations are made using overweight traffic data, the resulting values differ with the estimation method. CONCLUSIONS : The estimation methods based on the extreme distribution theory and the modified procedure presented in this paper can yield reasonable values for the maximum weight of a single truck, which can be applied in both the design and evaluation of a bridge on an expressway.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1261-1268
• /
• 2013

This study proposes a voltage and reactive coordinative control strategy with distributed generator (DG) in a distribution power system. The aim is to determine the optimum dispatch schedules for an on-load tap changer (OLTC), distributed generator settings and all shunt capacitor switching on the load and DG generation profile in a day. The proposed method minimizes the real power losses and improves the voltage profile using squared deviations of bus voltages. The results indicate that the proposed method reduces the real losses and voltage fluctuations and improve receiving power factor. This paper proposes coordinated voltage and reactive power control methods that adjust optimal control values of capacitor banks, OLTC, and the AVR of DGs by using a voltage sensitivity factor (VSF) and dynamic programming (DP) with branch-and-bound (B&B) method. To avoid the computational burden, we try to limit the possible states to 24 stages by using a flexible searching space at each stage. Finally, we will show the effectiveness of the proposed method by using operational cost of real power losses and voltage deviation factor as evaluation index for a whole day in a power system with distributed generators.

• 한국정보과학회논문지:시스템및이론
• /
• 제26권9호
• /
• pp.1064-1072
• /
• 1999

크기가 n인 하이퍼큐브 다중컴퓨터를 위한 대표적인 동적인 재분배 방법인 DEM(Dimension Exchange Method) 기법으로 양자화된 부하를 분배할 때 분배 후 각 프로세서가 갖는 부하의 크기는 최악의 경우, logn~단위부하 만큼 분배오차를 갖게 된다. 이러한 오차를 억제하기 위하여 본 논문에서는 두 프로세서간에 부하를 분배할 때, 가능하면 동일 유형(홀수개 또는 짝수개)의 단위부하를 동일 방향으로 재분배하는 기법을 제안하였다. 그 결과 최대 분배 오차를 LCEIL logn over {2} RCEIL 까지 줄일 수 있었다. 시뮬레이션에 의한 실험을 통해 기존 DEM 방법에 비해 약 30% 정도 시스템의 속도가 향상됨을 보임으로써 제안된 기법이 DEM 기법보다 타당성함을 입증하였다.