• 제목/요약/키워드: Limit Gas

검색결과 816건 처리시간 0.033초

수입 식육의 안전성 확보를 위한 polychlorinated dibenzo-p-dioxins와 dibenzofurans 분석 (Analysis of polychlorinated dibenzo-p-dioxins and dibenzofurans to assure safety of imported meat)

  • 김미경;김동규;김수연;최시원;권진욱;윤선종;송성옥;정갑수
    • 대한수의학회지
    • /
    • 제48권1호
    • /
    • pp.39-48
    • /
    • 2008
  • Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are ubiquitous and can contaminate the food chain. A study monitoring PCDD/Fs in imported meat was conducted at the National Veterinary Research and Quarantine Service (NVRQS, Republic of Korea) in order to maintain food safety from the bioaccumulative PCDD/Fs. Seventeen PCDD/Fs with toxic equivalency factors (TEFs) established by World Health Organization (WHO, 1998) were analyzed in imported beef, pork, and chicken by high resolution gas chromatography/mass spectrometry (HR-GC/MS). Results of the monitoring for the last 5 years are presented. The levels of PCDD/Fs were similar to other studies except two unusually high concentrations in pork and beef. Excessive levels greater than the Korean provisional maximum residue limit of PCDD/Fs were found in a sample of pork imported from Chile and a sample of beef imported from U.S, and those products were rejected and returned. There was no obvious trend or differences with respect to time or origin of meat in this study.

Simultaneous Determination of Plasticizers in Food Simulants Using GC/MS

  • Park, Na-Young;Yoon, Hae-Jung;Kwak, In-Shin;Jeon, Dae-Hoon;Choi, Hyun-Chul;Eum, Mi-Ok;Kim, Hyung-Il;Sung, Jun-Hyun;Kim, So-Hee;Lee, Young-Ja
    • 한국포장학회지
    • /
    • 제15권3호
    • /
    • pp.93-98
    • /
    • 2009
  • Migration levels of plasticizers, di-n-butyl phthalate (DBP), benzyl-butyl phthalate (BBP), di-n-octyl phthalate(DNOP), di-iso-decyl phthalate (DIDP) and di-iso-nonyl phthalate (DINP), di-(2-ethylhexyl) adipate (DEHA), from 46 poly(vinyl chloride) (PVC) wrap films and 54 PVC gaskets into food simulants were determined using gas chromatography/mass spectrometry (GC/MS). The method was validated with limit of detection (LOD) of $0.01{\sim}0.02\;{\mu}g/mL$ for DBP, BBP, DNOP and DEHA, and $2\;{\mu}g/mL$ for DIDP and DINP. The linearity were found to be > 0.99 for all the compounds in concentration range of $0.1{\sim}81.4\;{\mu}g/mL$, and overall recoveries were ranged from 90.4 ~ 99.6%. DBP, BBP, DNOP, DEHA, DIDP and DINP were not detected in food simulants, except 1 wrap sample from which 0.28 and $0.99\;{\mu}g/mL$ of DEHA were detected respectively when tested with 20% ethanol and n-heptane as food simulants. These values were below the regulatory limitation in European Union (EU).

  • PDF

단일필라멘트와 다중필라멘트 초전도 코일의 교류 전류에 의한 발열 특성 비교 평가 (A Comparison Study of Heat Loss Characteristics in Monofilament and Multifilament Superconducting Coils Driven with AC Currents)

  • 황성민;김기웅;강찬석;이성주;이용호
    • Progress in Superconductivity
    • /
    • 제13권2호
    • /
    • pp.111-116
    • /
    • 2011
  • Since superconducting wires have no resistance, electromagnets based on the superconducting wires produce no resistive heating with DC current as long as the current does not exceed the critical current of the wire. However, unlike resistive wires, superconducting wires exhibit AC heat loss. Embedding fine superconducting filaments inside copper matrix can reduce this AC loss to an acceptable level and opens the way to AC-capable superconducting coils. Here, we introduce an easy and accurate method to measure AC heat loss from sample superconducting coils by measuring changes in the rate of gas helium outflow from the liquid helium dewar in which the sample coil is placed. This method provides accurate information on total heat loss of a superconducting coil without any size limit, as long as the coil can fit inside the liquid helium dewar. With this method, we have evaluated AC heat loss of two superconducting solenoids, a 180-turn solid NbTi wire with 0.127 mm diameter (NbTi coil) and a 100-turn filamented wire with 1.4 mm diameter where 7 NbTi filaments were embedded in a copper matrix with copper to NbTi ratio of 6.7:1 (NbTi-Cu coil). Both coils were wound on 15 mm-diameter G-10 epoxy tubes. The AC heat losses of the NbTi and NbTi-Cu coils were evaluated as $53{\pm}4.7\;{\mu}W/A^2Hzcm^3$ and $0.67{\pm}0.16\;{\mu}W/A^2Hzcm^3$, respectively.

Development and validation of a qualitative GC-MS method for methamphetamine and amphetamine in human urine using aqueous-phase ethyl chloroformate derivatization

  • Kim, Jiwoo;Sim, Yeong Eun;Kim, Jin Young
    • 분석과학
    • /
    • 제33권1호
    • /
    • pp.23-32
    • /
    • 2020
  • Methamphetamine (MA) is the most common and available drug of abuse in Korea and its primary metabolite is amphetamine (AP). Detection of AP derivatives, such as MA, AP, phentermine (PT), MDA, MDMA, and MDEA by the use of immunoassay screening is not reliable and accurate due to cross-reactivity and insufficient specificity/sensitivity. Therefore, the analytical process accepted by most urine drug-testing programs employs the two-step method with an initial screening test followed by a more specific confirmatory test if the specimen screens positive. In this study, a gas chromatography-mass spectrometric (GC-MS) method was developed and validated for confirmation of MA and AP in human urine. Urine sample (500 µL) was added with N-isopropylbenzylamine as internal standard and ethyl chloroformate as a derivatization reagent, and then extracted with 200 µL of ethyl acetate. Extracted samples were analysed with GC-MS in the SIM/ Scan mode, which were screened by Cobas c311 analyzer (Roche/Hitachi) to evaluate the efficiency as well as the compatibility of the GC-MS method. Qualitative method validation requirements for selectivity, limit of detection (LOD), precision, accuracy, and specificity/sensitivity were examined. These parameters were estimated on the basis of the most intense and characteristic ions in mass spectra of target compounds. Precision and accuracy were less than 5.2 % (RSD) and ±14.0 % (bias), respectively. The LODs were 3 ng/mL for MA and 1.5 ng/mL for AP. At the screening immunoassay had a sensitivity of 100% and a specificity of 95.1 % versus GC-MS for confirmatory testing. The applicability of the method was tested by the analysis of spiked urine and abusers' urine samples.

물을 흡수매체로 이용한 트리메틸아민과 환원황화합물의 제거효율 비교 연구 (Removal Efficiency of Some Odorants against Water as Sorptive Media: A Case Study on Trimethylamine and Reduced Sulfur Compounds)

  • 안지원;김기현;옥준석;김용현
    • 한국대기환경학회지
    • /
    • 제25권6호
    • /
    • pp.512-522
    • /
    • 2009
  • In this study, the removal efficiency of trimethylamine (TMA) and four reduced sulfur compounds (RSC) of $H_2S$, $CH_3SH$, DMS, and DMDS was investigated using deionized water as absorbent. To this end, two types of experiments were conducted which include: (1) by passing both RSC and TMA standard gases through water contained in an impinger system and (2) by passing TMA gases through a water spray system. In the former method, TMA standard gases were effectively removed (below detection limit) in all experiments. Likewise, minor fractions of some RSC ($CH_3SH$, DMS, and DMDS) were removed by water in line with theoretical expectations. In addition, the first type of our experiment was extended further to test some commercially available odor treatment products. The results of this test showed that removal efficiencies of RSC $(8.2\pm13.7\sim43.7\pm2.48%)$ were different significantly among 4 kinds of absorbent, while the removal of TMA was consistently good as water. In the second phase of experiment, removal efficiency of TMA was tested by passing its standard gas through a water spray system. The overall results of our study showed that the actual removal efficiency of odorants by water (as sorptive media) approached the values that can be predicted theoretically (by Henry's law).

전시마취시 흡입압력기준의 양압조절호흡이 폐포환기 정도에 미치는 영향 (Effects of Inspiratory Pressure Preset on Alveolar Gas Exchange Using Anesthetic Ventilator)

  • 서일숙;강희주;김흥대
    • Journal of Yeungnam Medical Science
    • /
    • 제5권1호
    • /
    • pp.105-110
    • /
    • 1988
  • 흡입전신마취시에 마취호흡기를 사용할 겨우 환자에게 가장 적절한 1회 호흡량을 흡입시킬수 있는 방법을 알아보기 위하여 전신마취환자 30명에서 흡입기압력 $10cmH_2O$가 되도록 용량조절마취호흡기의 1회 호흡량을 조절하고 호흡수를 분당 12회로 하여 기계조절양압호흡을 유지시켜 보았던 바 다음과 같은 결과를 얻었다. 1) PH : $7.39{\pm}0.01$로서 정상범위내 이었다. 2) $PaCO_2$ : $34{\pm}0.6mmHg$ 로서 약간의 과환기상태 이었다. 3) $PaO_2$ : $228.0{\pm}8.2mmHg$ 이었다. 4) Buffer base : $20.7{\pm}0.3mEq/{\ell}$로서 약간의 염기부족상태 이었다. 이상의 결과로 미루어 보아 전신마취시 충분한 근 이완상태에서 기계조절호흡을 시행하는 경우 1회 호흡량 조절은 흡기압력을 $10cmH_2O$로 유지함이 가장 바람직한 것으로 사료된다.

  • PDF

흡착튜브 - 열탈착 정량분석 기법에 기반한 과일시료로부터 자연적 휘발성유기화합물의 배출특성 연구 (Biogenic Volatile Organic Compounds (BVOC) Emissions from Fruit Samples Based on Sorbent Tube Sampling and Thermal Desorption (ST-TD) Analysis)

  • 안정현;김기현
    • 한국대기환경학회지
    • /
    • 제29권6호
    • /
    • pp.757-772
    • /
    • 2013
  • In this study, a combination of sorbent tube (ST)-thermal desorption (TD)-gas chromatography (GC)-mass spectrometry (MS) was used for quantitative analysis of liquid phase standards of 10 BVOC ((1) (+)-${\alpha}$-pinene, (2) (+)-${\beta}$-pinene, (3) ${\alpha}$-phellandrene, (4) (+)-3-carene, (5) ${\alpha}$-terpinene, (6) p-cymene, (7) (R)-(+)-limonene, (8) ${\gamma}$- terpinene, (9) myrcene, and (10) camphene). The results of BVOC calibration yielded comparatively stable pattern with response factor (RF) of 23,560~50,363 and coefficient of determination ($R^2$) of 0.9911~0.9973. The method detection limit (MDL) of BVOC was estimated at 0.03~0.06 ng with the reproducibility of 1.30~5.13% (in terms of relative standard error (RSE)). Emissions of BVOC were measured from four types of fruit samples ((1) tangerine (TO), (2) tangerine peel (TX), (3) strawberry (SO), and (4) sepals of strawberry (SX)). The sum of BVOC flux (${\sum}flux$ (BVOC) in ng/hr/g) for each sample was seen on the descending order of (1) TX=291,614, (2) TO=2,190, (3) SO=1,414, and (4) SX=2,093. If the results are compared between the individual components, the highest flux was seen from (R)-(+)-limonene (265,395 ng/hr/g) from TX sample.

Mitigation of Ammonia Dispersion with Mesh Barrier under Various Atmospheric Stability Conditions

  • Gerdroodbary, M. Barzegar;Mokhtari, Mojtaba;Bishehsari, Shervin;Fallah, Keivan
    • Asian Journal of Atmospheric Environment
    • /
    • 제10권3호
    • /
    • pp.125-136
    • /
    • 2016
  • In this study, the effects of the mesh barrier on the free dispersion of ammonia were numerically investigated under different atmospheric conditions. This study presents the detail and flow feature of the dispersion of ammonia through the mesh barrier on various free stream conditions to decline and limit the toxic danger of the ammonia. It is assumed that the dispersion of the ammonia occurred through the leakage in the pipeline. Parametric studies were conducted on the performance of the mesh barrier by using the Reynolds-averaged Navier-Stokes equations with realizable k-${\varepsilon}$ turbulence model. Numerical simulations of ammonia dispersion in the presence of mesh barrier revealed significant results in a fully turbulent free stream condition. The results clearly show that the flow behavior was found to be a direct result of mesh size and ammonia dispersion is highly influenced by these changes in flow patterns in downstream. In fact, the flow regime becomes laminar as flow passes through mesh barrier. According to the results, the mesh barrier decreased the maximum concentration of the ammonia gas and limited the risk zone (more than 500 ppm) lower than 2 m height. Furthermore, a significant reduction occurs in the slope of the upper boundary of $NH_3$ risk zone distribution at downstream when a mesh barrier is presented. Thus, this device highly restricts the leak distribution of ammonia in the industrial plan.

화석 연료와 온실가스 저감이 생산효율과 경제성장에 미치는 효과 -전통적 접근과 MFA접근 비교- (Effect of Fossil Fuels and Green House Gas on Production Efficiency and Economic Growth)

  • 강상목
    • 자원ㆍ환경경제연구
    • /
    • 제23권3호
    • /
    • pp.365-408
    • /
    • 2014
  • 본 연구의 목적은 전통적 접근의 한계를 지적하고 물질균형 접근의 생산효율을 도입하여 두 생산효율의 차이와 2단계 효율, 오염규제의 경제성장에 미치는 영향 등을 비교하고자 함이다. 특히 상이한 국가들을 대상으로 세 그룹으로 구분하여 이들의 결과를 비교한다. 본 연구에서는 화석연료 투입물을 직접 연계된 $CO_2$와 산출물과 연결시킴으로써 보다 현실에 가까운 생산효율을 측정하였다. 전통적 생산효율과 물질균형 효율비교에서 효율의 측정치는 세부적으로 살펴보면 상당한 차이가 있다. 특히 투입물인 화석연료를 고려하지 않을 경우 저소득국은 생산효율의 성과가 나쁘고 OECD와 중고소득이 보다 좋은 성과를 보인 것으로 나타나고 있어서 현실을 제대로 반영하지 못하고 있다. 물질흐름접근에 기초할 경우 저소득국의 성과가 OECD보다 높고 환경적 요인이 경제에 미치는 영향도 보다 완화된 것으로 확인된다.

LPG엔진에서 이온프로브를 이용한 노킹 발생 위치 추정에 관한 연구 (Study on the Estimation of Knock Position in a LPG Engine with Ion-probe Head Gasket)

  • 이정원;최회명;조훈;황승환;민경덕
    • 한국자동차공학회논문집
    • /
    • 제11권1호
    • /
    • pp.42-48
    • /
    • 2003
  • LPG has been a broad concern of pro-environmental alternative fuel for vehicles. Recently, the new Liquid Phase LPG Injection(LPLI) system extends the limit of power of LPG engine and gives a chance to substitute LPG engine for diesel engine of heavy duty vehicles that are the main resources of air pollution in urban area. Large bore size of heavy duty LPG engine derives a serious knock problem. To find an optimal MBT conditions, it is necessary to know how the flame develops in the combustion chamber and find where the knock positions are. In this study. the ion-probe head gasket was used to estimate the knock position. Inverse operation of the ion-probe signal provides the flame developing characteristics. The further the position is from the spark plug, the later the flame arrives and the more times knock occurs. The main factor that effects knock position is inferred a flor situation of mixed gas in the combustion chamber.