• Journal of Forest and Environmental Science
• /
• 제27권3호
• /
• pp.183-194
• /
• 2011

This study reviewed on the research trend of sources and utilization of the byproducts(Lignin) from bioethanol production process with lignocellulosic biomass such as wood, agri-processing by-products(corn fiber, sugarcane bagasse etc.) and energy crops(switch grass, poplar, Miscanthus etc.). During biochemical conversion process, only Cellulose and hemicellulosic fractions are converted into fermentable sugar, but lignin which represents the third largest fraction of lignocellulosic biomass is not convertible into fermentable sugars. It is therefore extremely important to recover and convert biomass-derived Lignin into high-value products to maintain economic competitiveness of cellulosic ethanol processes. It was introduced that lignin types and characteristics were different from various isolation methods and biomass sources. Also utilization and potentiality for market of those were discussed.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.45-50
• /
• 1996

Wood chips of oak(Quercus mongolica) and larch(Larix leptolepis) were treated with low pressure steaming explosion. Main components of exploded wood were separated with hot water and methanol extraction. Crude lignin separated from those extractives were purified and those chemical characteristics were investigated. And also, lignin adhesive was prepared from crude lignin and studied those chemical characteristics. The results can be summarized as follows ; 1. The purified lignin by Bj$\ddot{o}$kman's method from crude lignin is about 30% in exploded oak wood and is about 11% in exploded larch wood as a low amount. 2. The phenolic hydroxyl groups in the purified lignins are little higher than those of MWL and molecular weight distributions of the purified lignins are some lower than that of MWL. 3. Alkaline nitrobenzene oxidation products are very low in the clude lignin but those are increased in the purified lignin 4. The gravity of lignin resins(1.15 and 1.13) are a little lower than that of phenol resin(1.16) and the compressive shearing strength of lignin resins are higher than those of phenol resin.

• Elastomers and Composites
• /
• 제56권3호
• /
• pp.136-151
• /
• 2021

Biomass lignin, a waste produced during the paper and bio-ethanol production process, is a cheap material that is available in large quantities. Thus, the interest in the valorization of biomass lignin has been increasing in industrial and academic areas. Over the years, lignin has been predominantly burnt as fuel to run pulping plants. However, less than 2% of the available lignin has been utilized for producing specialty chemicals, such as dispersants, adhesives, surfactants, and other value-added products. The development of value-added lignin-derived co-products should help make second generation biorefineries and the paper industry more profitable by valorizing lignin. Another possible approach towards value-added applications is using lignin as a component in plastics. However, blending lignin with polymers is not simple because the polarity of lignin molecules results in strong self-interactions. Therefore, achieving in-depth insights on lignin characteristics and structure will help in accelerating the development of lignin-based products. Considering the multipurpose characteristics of lignin for producing value-added products, this review will shed light on the potential applications of lignin and lignin-based derivatives on polymeric composite production. Moreover, the challenges in lignin valorization will be addressed.

• Journal of Electrochemical Science and Technology
• /
• 제15권1호
• /
• pp.111-131
• /
• 2024

Lignin-derived porous carbon has been identified as a versatile electrode material for supercapacitors (SCs) in energy storage systems (ESSs) owing to their intrinsic advantages including good electrical conductivity, low cost, high thermal and chemical stability, and high porosity, which stem from high surface, appropriate pore distribution, tailored morphologies, heterostructures, and diverse derivates. In this review, to provide a fundamental understanding of the properties of lignin, we first summarize the origin, historical development, and basic physicochemical properties. Next, we describe essential strategies for the preparation of lignin-derived porous carbon electrode materials and then highlight the latest advances in the utilization of lignin-derived porous carbon materials as advanced electrode materials. Finally, we provide some of our own insights into the major challenges and prospective research directions of lignin-derived porous carbon materials for supercapacitors. We believe that this review will provide general guidance for the design of next-generation electrode materials for supercapacitors.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권6호
• /
• pp.862-879
• /
• 2001

The walls of all higher plants are organized as a cellulosic, fibrillar phase embedded in a matrix phase composed of non-cellulosic polysaccharides, some proteins and, in most secondary walls, lignin. At the effective utilization of plant biomass, qualitative and quantitative analyses of plant cell walls are essential. Structural features of individual components are being clarified using newly developed equipments and techniques. However, "empirical" procedures to elucidate plant cell walls, which are not due to scientific definition of components, are still applied in some fields. These procedures may give misunderstanding for the effective utilization of plant biomass. In addition, interesting the investigation of wall organization is moving towards not only qualitatively characterisation, but also quantitation of the associations between wall components. These involve polysaccharide-polysaccharide and polysaccharide-lignin cross-links. Investigation of the associations is being done in order to understand the chemical structure, organization and biosynthesis of the cell wall and physiology of the plants. Procedures for qualitative and quantitative analyses based on the definition of cell wall components are reviewed focussing in nutritional elucidation of forage grasses by ruminant microorganisms.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권2호
• /
• pp.1-10
• /
• 2024

With industrial development, the inevitable increase in both organic and inorganic waste necessitates the exploration of waste treatment and utilization methods. This study focuses on co-pyrolyzing lignin and red mud to generate metalbiochar, aiming to demonstrate their potential as effective adsorbents for water pollutant removal. Thermogravimetric analysis revealed mass loss of lignin below 660℃, with additional mass loss occurring (>660℃) due to the phase change of metals (i.e., Fe) in red mud. Characterization of the metal-biochar indicated porous structure embedded with zero-valent iron/magnetite and specific functional groups. The adsorption experiments with 2,4-dichlorophenol and Cd(II) revealed the removal efficiency of the two pollutants reached its maximum at the initial pH of 2.8. These findings suggest that copyrolysis of lignin and red mud can transform waste into valuable materials, serving as effective adsorbents for diverse water pollutants.

• 생명과학회지
• /
• 제12권4호
• /
• pp.392-398
• /
• 2002

Lignocellulose 분해 이용을 위해 토양 등에서 lignin분해 능력이 우수한 세균을 분리 및 동정함으로서 방향족 화합물의 이용을 위한 생물전환의 기초를 확보하고자하였다. 토양 등의 시료로부터 38주의 리그닌 분해 균주를 분리하였다. 분리된 LG2를 공시 균주로 선정하여 형태학적, 배양학적 및 생리학적 특성을 조사한 결과 Pseudomonas sp. LG2로 명명하였다. 이 균주는 리그닌을 분해 할 수 있었으며, 리그닌 함유 배지에 배양하여 배양 분해 산물을 HPLC로 분석한 결과 다수의 방향족 화합물을 생산하였다 Poylacrylamide gel활성 분석에 의해서 3종류로 구성된 peroxidase가 조사되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권1호
• /
• pp.13-20
• /
• 1995

This study was carried out to investigate the characterization of lignins from waste liquors in SP, KP, ASAM, and AS from Pinus densiflora, Quercus mongolica, and Betula ermanii. Spectroscopic study was applied to examine the lignins separated from different pulping process. Lignin contents in waste liqours increased in order of AS, ASAM, KP, and SP. UV spectra of three types of lignin except AS lignin showed similar pattern. IR spectra of AS lignin showed strong C=O absorptions in the range from 1730 to 1750$cm^{-1}$, where as those of KP, SP, and ASAM showed weak stretch in this region. NMR spectra of AS lignin showed strong characteristic chemical shifts of acetoxyl groups of acetylated aliphatic and aromatic hydroxyl groups at 2.0~2.5 ppm. Molecular weight of ASAM lignin from Pinus densiflora determined and found number average molecular weight 1,199, weight average molecular weight 5,458. z average molecular weight 17,242, and viscosity average molecular weight 5,457. It is considered from the results based on spectroscopic study of lignin that waste liquors (in SP, KP, ASAM and AS) from Pinus densiflora, Quercus mongolica, and Betula ermanii can be used for lignin utilization.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.251.2-251.2
• /
• 2010

Plant biomass has been proposed to be an alternative source for petroleum-based chemical compounds. Especially, phenolic chemical compounds can be obtained from lignin by chemical depolymerization processes because lignin consists of complex aromatic polymer such as trans-p-coumaryl, coniferyl and sinapyl alcohols, etc. Phenolic chemical compounds from lignin were usually produced in super critical water. However, we applied Near-critical water (NCW) system because NCW is known as a good solvent for lignin depolymerization. Organic matter like lignin can be solved in NCW system and the system has a unique acid-base property without conventional non-eco-friendly chemicals such as sulfuric acid and sodium hydroxide. In this work, we tried to optimize the NCW depolymerization system by adjusting the processing variables such as reaction time, temperature and pressure. Moreover, the amount of additional phenol was optimized by changing the molar ratio between water and phenol. Phenol was used as capping agent to prevent re-polymerization of active fragment such as formaldehyde. Alkali-lignin was used as a starting material and characterized by a Solid State 13C-NMR, FT-IR and EA (Elemental Analysis). GC-MS analysis confirmed that o-cresol, p-cresol, anisole and 4-hydroxyphathalic acid were the main product and they were quantitatively analyzed by HPLC.

• Journal of the Korean Wood Science and Technology
• /
• 제20권3호
• /
• pp.11-20
• /
• 1992

Steam explosion is one of the most effective pretreatment for fractionating wood. This leads to the total utilization of wood basic components; cellulose, hemicellulose and lignin. The amount of sugar and lignin extracted with the hot water method was very low. The lignin content of residues after extraction with using a sodium hydroxide treatment, increased delignification of carbohydrate as the concentration of alkali was increased. Oak, pretreated with steam exploded at 25kg/$cm^2$ for 6 min. then 1% alkali for 2hrs. showed a delignification rate up to 95%. A sodium chlorite treatment of steam exploded pine and oak also afforded a high deligninfication effect. Pine, treated 10% sodium chlorite for 2hrs. showed high delignification. However, by using a sodium hydroxide treatment, a 2% retreatment for Ihr. after a 2% for 2hrs. afforded remarkable delignification effect on exploded wood at 30kg/$cm^2$ for 9min. and at 35kg/$cm^2$ for 3-6min. In oak, an initial 2hrs. treatment of 2% sodium chlorite was followed by a second 2hrs. treatment at 10%. This showed a delignification rate of 96%.