• 제목/요약/키워드: Lightweight aggregate

검색결과 364건 처리시간 0.029초

Sol-gel법으로 이산화티탄(TiO2)을 저온소성 도포시킨 경량골재콘크리트의 아세트알데히드(CH3CHO) 제거 특성 (The CH3CHO Removal Characteristics of Lightweight Aggregate Concrete with TiO2 Spreaded by Low Temperature Firing using Sol-gel Method)

  • 이승한;여인동;정용욱;장석수
    • 대한토목학회논문집
    • /
    • 제31권2A호
    • /
    • pp.129-136
    • /
    • 2011
  • 최근 대기오염 물질을 제거하기 위하여 $TiO_2$ 등의 광촉매 재료를 사용한 기능성콘크리트에 대한 연구가 활발히 이루어지고 있다. 이들 연구에서 $TiO_2$의 흡착은 콘크리트에 직접 혼합하거나, 현탁액을 표면에 직접 도포하는 방법을 사용하고 있다. 이 중 콘크리트에 $TiO_2$를 직접 혼합하는 방법은 $TiO_2$의 사용량에 비하여 효능이 떨어져 표면에 직접 도포하는 방법이 많이 이용된다. $TiO_2$의 표면도포는 광촉매의 활성화와 접착성 증대를 위하여 $400^{\circ}C$ 이상의 고온 열처리를 실시하게 되며, 이는 콘크리트 수화생성물의 탈수 수축으로 내부균열을 발생시키는 원인이 되기도 한다. 이에 이 연구에서는 $TiO_2$의 저온도포가 가능한 Sol-gel법으로 $TiO_2$를 제조하였으며 펄라이트 사용 경량골재콘크리트에 저온 고정화하여 $TiO_2$ 도포 성능을 평가하였다. 또한 펄라이트 입경을 2.5~5.0 mm와 5.0 mm이상으로 구분하여 펄라이트 입경, $TiO_2$ 혼입방법과 혼입률 및 시간경과에 따른 $CH_3CHO$ 제거 특성을 검토하였다. 실험결과, Sol-gel법으로 제조한 $TiO_2$$120^{\circ}C$에서 저온 도포할 때 XRF 정량분석에서 $TiO_2$ 38%, $SiO_2$ 29%, CaO 18% 순으로 나타나 $TiO_2$ 도포율은 높게 나타났다. 또한 펄라이트 입경 2.5~5.0 mm에서 $TiO_2$를 저온도포한 경량골재콘크리트의 $CH_3CHO$ 제거 특성은 Sol-gel법으로 제조된 $TiO_2$를 7% 표면 도포하였을 경우 94%로 나타나 10%를 혼입할 때 72%에 비해 약 20%정도 높게 나타났다. 또한 펄라이트 입경 5.0 mm이상에서 $TiO_2$를 10%로 치환하여 혼합하였을 경우 $CH_3CHO$ 제거율은 69%로 펄라이트 입경 2.5~5.0 mm에 대한 72%와 비슷하게 나타나 펄라이트 입경이 $CH_3CHO$ 제거율에 미치는 영향은 크지 않았다. 시간 경과에 따른 $CH_3CHO$ 제거 특성은 전 시험편의 10시간 평균 제거율이 20시간 전체 제거율의 84% 수준으로 나타나 반응 초기에 제거율이 높은 것으로 나타났다.

석탄 잔사회 및 바닥재가 포함된 인공경량골재의 발포특성에 미치는 활성탄소의 영향 (Effect of activated carbon on bloating properties of artificial lightweight aggregates containing coal reject ash and bottom ash)

  • 강민아;강승구
    • 한국결정성장학회지
    • /
    • 제23권4호
    • /
    • pp.201-206
    • /
    • 2013
  • 화력발전소에서 배출되는 석탄 바닥재 및 잔사회는 재활용이 힘든 폐자원이어서 주로 매립 처분되고 있다. 본 연구에서는 국내 화력발전소에서 배출된 석탄 잔사회, 바닥재 그리고 준설토를 혼합하여 인공골재를 제조하고, 실험인자가 골재의 발포거동 및 물성에 미치는 영향을 분석하였다. 특히 미연탄소가 많이 포함되어 있는 잔사회에 대하여 하소 처리를 한 뒤, 인위적으로 활성탄소를 첨가함으로서 하소유무 및 활성탄소 첨가량이 인공골재의 발포특성에 미치는 영향을 조사하였다. 이를 위해 인공골재의 부피비중 및 흡수율 값을 시편의 미세구조 관찰 결과와 연계하여 고찰함으로서, 잔사회의 재활용율 제고에 일조하고자 하였다.

Mechanical properties of sustainable green self-compacting concrete incorporating recycled waste PET: A state-of-the-art review

  • Shireen T. Saadullah;James H. Haido;Yaman S.S. Al-Kamaki
    • Advances in concrete construction
    • /
    • 제16권1호
    • /
    • pp.35-57
    • /
    • 2023
  • Majority of the plastic produced each year is being disposed in land after single-use, which becomes waste and takes up a lot of storage space. Therefore, there is an urgent need to find alternative solutions instead of disposal. Recycling and reusing the PET plastic waste as aggregate replacement and fiber in concrete production can be one of the eco- friendly methods as there is a great demand for concrete around the world, especially in developing countries by raising human awareness of the environment, the economy, and Carbon dioxide (CO2) emissions. Self-compacting concrete (SCC) is a key development in concrete technology that offers a number of attractive features over traditional concrete applications. Recently, in order to improve its durability and prevent such plastics from directly contacting the environment, various kinds of plastics have been added. This review article summarizes the latest evident on the performance of SCC containing recycled PET as eco-friendly aggregates and fiber. Moreover, it highlights the influence of substitution content, shape, length, and size on the fresh and properties of SCC incorporating PET plastic. Based on the findings of the articles that were reviewed for this study, it is observed that SCC made of PET plastic (PETSCC) can be employed in construction era owing to its acceptable mechanical and fresh properties. On the other hand, it is concluded that owing to the lightweight nature of plastic aggregate, Reusing PET waste in the construction application is an effective approach to reduces the earthquake risk of a building.

단위결합재량에 따른 고로슬래그 기반 육성용 인공토양골재의 특성평가 (Evaluation of Properties of Artificial Soil Aggregate Based on Ground Granulated Blast-Furnace Slag According to Unit Binder Content)

  • 문주현;심재일;윤인구
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제20권5호
    • /
    • pp.85-92
    • /
    • 2016
  • 본 연구에서는 경량기포 콘크리트를 이용한 육성용 토양골재의 적용성을 평가하기 위해서 고로슬래그 기반 기포콘크리트의 총 8배합과 인공토양골재를 제조하였다. 고로슬래그 기반 기포콘크리트 배합의 주요변수는 단위결합재량으로서 100에서 $800kg/m^3$으로 변화하였다. 경량기포콘크리트는 플로우, 슬러리 및 절건 밀도와 재령별 압축강도를 측정하였으며, 파쇄된 인공토양골재는 pH, 입도분포, 투수계수, 양이온치환용량(CEC), 유기물함유량(C/N비)을 측정하였다. 측정결과 경량기포콘크리트의 플로우, 슬러리 및 절건밀도와 재령별 압축강도는 단위결합재량이 증가함에 따라 증가하였다. 경량기포콘크리트의 단위결합재량이 $500kg/m^3$ 이상인 배합의 28일 압축강도는 4 MPa 이상이었다. 인공토양골재에 3일 이상의 15% 희석된 제1인산암모늄의 수용액침지는 pH를 저감시키는데 효과적이었다. 또한 제조된 인공토양골재는 양이온 치환용량(CEC) 측면에서 상급으로 평가되었지만 C/N비 측면에서는 조경시방서를 만족시키지 못하였다.

수열반응 조건에서 석분 슬러지를 사용한 경량 기포 콘크리트의 밀도와 강도 특성 (The Density and Strength Properties of Lightweight Foamed Concrete Using Stone-Powder Sludge in Hydrothermal Reaction Condition)

  • 김진만;정지용;최세진;김봉주
    • 콘크리트학회논문집
    • /
    • 제18권5호
    • /
    • pp.687-693
    • /
    • 2006
  • 8mm 이하의 석분으로부터 잔골재를 생산하기 위한 공정에서 부산되는 공정부산물인 석분슬러지는 평균 입자 크기 $7{\mu}m$, 함수율 $20{\sim}60%,\;SiO_2$ 함량 60% 이상의 케익상 슬러지이다. 석분슬러지는 수분을 많이 함유하고 있어 취급, 운반을 어렵게 할 뿐만 아니라 건조공정에 투입해야 하는 높은 에너지 비용 때문에 재활용할 때의 경제성이 낮기 때문에 그동안 실용화되지 못하고 있는 산업부산물이다. 본 연구는 건조하지 않고 석분슬러지가 배출되는 상태 그대로 재활용하기 위한 것으로, 적용 대상은 기포 콘크리트이며, 무기 분말 및 기포를 혼합한 슬러리를 제조한 후 CaO와 $SiO_2$의 수열반응을 유도하여 토버모라이트(tobermorite) 수화물을 형성시켜 경화시키는 방법을 사용하였다. 일반적인 기포 콘크리트는 CaO원으로 시멘트, $SiO_2$원으로 실리카 함량 90%의 고순도 규사를 사용하고 있으나 본 연구에서는 고순도 규사의 대체재료로 석분슬러지를 사용하였다. 기포 첨가율과, 석분슬러지 대체율을 실험 요인으로 하여 제조한 기포 콘크리트의 밀도 및 강도 특성을 검토 한 결과 석분슬러지를 사용한 경우에도 기포첨가율의 감소에 따라 기포 콘크리트의 밀도 및 강도가 증대하는 일반적인 경향은 동일하게 나타났으나, 석분슬러지를 사용한 경우는 규사를 사용한 것에 비하여 동일한 조건에서 높은 강도 및 밀도를 발현하며, 그 경향은 석분슬러지의 대체율의 증가에 따라 뚜렷한 것으로 나타났다. 또한 XRD 분석결과 석분슬러지는 수열반응을 통하여 tobermorite를 아주 잘 형성하고 있는 것을 확인할 수 있었다. 석분슬러지의 $SiO_2$ 함량이 낮음에도 불구하고 이와 같은 현상을 보이는 것은 그 입도가 매우 작기 때문에 시멘트계 재료와의 수열반응이 좀 더 원활하게 이루어지기 때문에 나타난 것으로 사료되며, 본 연구 결과 실험 실적으로는 기포 콘크리트의 원료로 규사를 석분슬러지로 대체하여 사용하는 것이 가능할 것으로 나타났다.

초경량 폴리머 콘크리트의 공학적 특성 (Engineering Properties of Surlightweight Polymer Concrete)

  • 성찬용;김경태
    • 한국농공학회지
    • /
    • 제39권4호
    • /
    • pp.75-81
    • /
    • 1997
  • This study was performed to evaluate the engineering properties of surlightweight polymer concrete using synthetic lightweight aggregate. The following conclusions were drawn; 1. The unit weight was in the range of 0.849~0.969t/$m^3$, the unit weights of those concrete were decreased by 58 ~ 63% than that of the normal cement concrete. 2. The highest strength was achieved by $P_1$, and compressive strength was increased by 93% and bending strength by 364% than that of the normal cement concrete, respectively. 3. The ultrasonic pulse velocity was in the range of 2, 346~2, 702m/s, which was low compared to that of the normal cement concrete. 4. The dynamic modulus of elasticity was in the range of $1.561{\times} 10{^5}~1.916{\times} 10{^5}kgf/cm^2$, which was approximately 52~98% of that of the normal cement concrete. 5. The compressive and bending strength were increased with the increase of unit weight. But, the dynamic modulus of elasticity and ultrasonic pulse velocity were decreased with the increase of unit weight.

  • PDF

산업부산물을 활용한 고강도경량 콘크리트 건조수축 특성연구 (A Study on shrinkage of High Strength Lightweight Concrete using by-products)

  • 장주영;윤요현;이승조;박정민;김태곤;김화중
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.36-39
    • /
    • 2003
  • In this study, we made the high strength light weight concrete which was composed of the garnet minute powder to be the industry by-product in the YoungJoo region and the artificial light weight aggregate which the high temperature(1100℃) plastic process. The characteristic of the autogenous shrinkage had been considered about strength characteristic and the age passage In the following addition: The concrete's each unit quantity was determined 145,160,175㎏f/㎥.w/b and s/a was determined 30%, 43%, 45%. the each garnet's substitution ratio was determined 0, 10%. In this results, the compressive strength appeared greatly as the unit joining discretion grew bigger. The autogenous shrinkage ratio was increased rapidly until 7th day but it was reduced after 7th day regardless of the mixed factor. The autogenous shrinkage ratio which follows the change of the unit quantity and s/a increased together as the unit quantity and the s/a increases.

  • PDF

산업쓰레기 소각재를 이용한 인공골재의 품질특성 (The Quality Characteristics of Artificial Aggregates Using Bottom ash from Industrial Waste Incinerator)

  • 김재신;고대형;문경주;백명종;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.257-262
    • /
    • 2000
  • The purpose of this study is grasping quality aggregate using Bottom Ash of Industrial Waste Incinerator, and is evaluating possibility of application as construction materials. Cement and Fly ash is used with binder of aggregates using bottom ash. It is tested for basic property and strength of artificial aggregates, and the results are compared with crushed stone and elution tests is done for environmental safety. In the results of tests, it is confirmed that basic property and strength are lowe than crushed stone but the aggregates have possibility of application as artificial lightweight aggregates. When it is manufactured with aggregates, it is sage environmentally because of protecting elution of harmful heavy metals.

  • PDF

경량화 콘크리트에서 기포제의 함량에 따른 흡음특성에 관한 연구 (The Study on Sound Absorption According to Content of Foaming Agent In Lightweight Concrete)

  • 홍도관;안찬우;강진구;우병철;최재기;강헌찬
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.955-958
    • /
    • 2006
  • The purpose of this study is to find ways of recycling a great amount of gypsum as by-product from the manufacture of phosphate fertilizer. For the purpose, this researcher investigated physical properties of light weight Porous material using waste gypsum and a foaming agent, Sodium n-dodecyl Sulfate to utilize it as a interior material of construction. To determine such properties, the study examined pore size distribution and pore rate in accordance with contents of Sodium n-dodecyl Sulfate added. Then expanded vermiculite as light-weight aggregate was also added, when pore size distribution, pore rate and sound absorption rate were surveyed and measured.

  • PDF

혈암의 소성온도 및 체류시간에 따른 발포특성에 관한 실험적 연구 (Experimental Study on the Foaming Characteristics according to the Plastic Temperature and the Retention Time of Shale)

  • 문동환;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 춘계 학술논문 발표대회
    • /
    • pp.58-59
    • /
    • 2018
  • In this study, firing experiments were carried out to confirm the foamability of the expansive shale collected from the local area. When expansive shales are subjected to high temperature heat, gas is generated inside and voids are formed. Due to this phenomenon, shale is used as a raw material for lightweight aggregate. Experiments were carried out with different plastic temperature and residence time to find the appropriate plastic temperature for this expansive shale. As a result, the higher the plastic temperature, the more the surface viscosity increased and the gas generated inside were retained. Resulting in a number of internal voids. However, even if the plastic temperature or the medium temperature is high, it is confirmed that sufficient gas is not generated when the residence time is shortened.

  • PDF