• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.276-282
• /
• 2023

In this paper, we designed a lighting optical system using a freeform lens as a substitute for expensive gobo lighting. Unlike gobo lighting, freeform lens lighting does not use an image mask, and it can form and project an image directly on the lens surface using only a single lens, thus reducing the cost compared to gobo lighting. In order to verify the performance of freeform lens lighting with these advantages, we conducted an illuminance simulation. As a result, it was confirmed that it can replace gobo lighting because it has an illuminance distribution similar to the image we want to irradiate and a light efficiency of 47% similar to the performance of gobo lighting.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.215-222
• /
• 2012

Lighting represents a significant component of commercial buildings, particularly office buildings. Fluorescent lighting is invariably used in all commercial, industrial and residential areas. A significant amount of lighting energy is wasted every day by leaving the lights on and not utilizing daylight energy. However, if daylight illuminance can be harnessed, this will reduce the electricity consumption of fluorescent lamps and save energy. This paper explains possible significant savings in lighting energy consumption and hence in costs, without reducing the performance and visual satisfaction in office or industrial buildings. It is proposed to obtain energy saving by reducing the supply voltage without degradation in lighting performance. Experimental results confirm that as much as 20% of electrical energy can be saved by reducing about 9% of the supply voltage, without noticeably affecting light output while complying with lighting standard limits.

• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.11-24
• /
• 2010

Lighting industry is rapidly being developed as the ubiquitous society based on sensor network emerges. This kind of paradigm shift brings the society convergence of technologies which leads to smart lighting system as well as the integration of interior and sensibility control. However, standards for sensors have not been firmly established, and problems related to quality and malfunction have been brought up, thereby calling for careful approach to the enhancement and assessment of reliability of the item. In this article reliability assessment criteria for sensor module for lighting fixtures is established in terms of performance assessment criterion and reliability assessment criterion.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.224-229
• /
• 2009

A Study on the Stage Lighting Design by the Type of Performance Hall The purpose of this study is to inquire into the practice of lighting design which is changed by type of stage Proscenium Stage, Thrust Stage, Arena Stage, and Flexible Stage, which have originated from ancient Greek theatre and are still used in contemporary theatre. This studt takes a good at the practical application of lighting design to different types of stage, through which it is expected to improve the understanding of lighting as a part of performing arts and to develop the quality of stage arts. The way of lighting design by type of stage can be acstracted as the following. This is expected to be of a great help to stage arts as well as different lighting designs for each type of stage. The methodology of lighting design might have limits in its application to practice in the current war Id where theatre structures and lighting equipments are fast-developing and ever-changing. However, lighting design can develop based on the basic design concepts as the researches of all fields can develop by applying their basic theories.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.113-119
• /
• 2011

LED lighting has received much attention in recent years due to its high energy efficiency and environmental friendliness. As the color of light can be obtained by adjusting the light intensity of LEDs, the quality of visual environment can be improved. The aims of this study are to develop a wavelength adjustable LED lighting system and to examine its lighting performances. The LED lighting system and experimental cell for assessment of the lighting performance were constructed. This LED lighting system is able to materialize the various spectral power distribution and color temperature of light through the control of the four dimmers. Up to $432^4$ kinds of light combinations are possible. The range of illuminance on workplane were measured as 7~1,831 ㏓. Improvement of psychological and physical functions for occupants can be expected according to control of lighting performances.

• Animal Bioscience
• /
• v.34 no.7
• /
• pp.1243-1252
• /
• 2021

Objective: An experiment was conducted to investigate the continuous and intermittent lighting program effects on terms of the productive performance, carcass traits, blood biochemical parameters, innate immune and oxidative status in broiler chicks. Methods: A total of 600 Cobb-500 one day old chicks were randomly allocated into six equal groups (100 chicks per treated group with five replicates of 20 chicks each) based on lighting program; 22 continuous lighting (22 C), 11 h lighting+1 darkness twice daily (11 L/1 D), 20 h continuous lighting (20 C), 5 h lighting+1 darkness four times daily (5 L/1 D), 18 h continuous lighting (18 C) and the final group subjected for 3 h lighting+1 h darkness six times daily (3 L/1 D). The experimental period lasted 42 days. Results: Compared with those under the intermittent light program, broiler chicks exposed to continuous lighting for 22 h had significant improvement in live body weight and carcass (dressing and breast percentage) measured traits. Though reducing lighting hours significantly reduced feed intake and feed conversion ratio values. Different lighting programs revealed no significant effect on all blood biochemical parameters. Oxidative stress and innate immunity parameters significantly enhance by reducing lighting hours (3L/1D). Conclusion: The findings suggest that reducing lighting hours up to 3L/1D would be more useful in enhancing feed efficiency, innate immunity, and oxidative status compared with continuous lighting programs on broilers.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.12
• /
• pp.1-8
• /
• 2012

The performance and lighting characteristics of the LED depend on cooling condition because the power LED generates lots of heat. In this paper, the effect of the generated heat from power LED module on lighting characteristics and performance is measured and evaluated. For experiments, the transient temperature of a power LED module with cooling condition is measured. In addition, the temperature and lighting characteristics of the LED module are measured during the steady state. As a result, the cooling condition is less effective on the lighting characteristics of the LED module at rated current but the cooling condition extremely affects those of the LED module over the rated current. Because high temperature of the power LED module causes the low phosphor conversion, luminance efficiency becomes low and color temperature becomes high. When power LED module are driven over the rated condition, higher temperature is directly related to lighting characteristics and performance of the LED module rather than higher current.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.91-96
• /
• 2014

Modern electronic circuits are becoming more vulnerable to damage by surges, and it is required to improve the impulse withstand voltage performance of electrical and electronic equipment. This paper presents the impulse withstand voltage performance of lighting equipment connected to power lines, and the impulse withstand voltage tests for fluorescent lamp, LED lamp and halogen lamp were carried out according to the reference standards under normal service conditions. To conduct performance tests against lightning surge, a combination wave ($1.2/50{\mu}s$ voltage - $8/20{\mu}s$ current) was employed. The test surge was applied between lines or between line and ground of the specimen to be measured. The test surge was applied synchronized at the peak value of the positive and negative AC voltage waves. As a consequence, some specimens satisfied the impulse withstand voltage test criteria, but lighting equipment such as 36W fluorescent lamps, 5W and 5.5W LED lamps and 50W halogen lamp were damaged at the test voltage levels between power lines. It is needed to improve the qualities of lighting equipment to satisfy EMC immunity requirements of equipment for general lighting purposes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.99-104
• /
• 2011

Daylighting system is an alternative to the energy crisis and environment change. And it is possible improvement system of Architectural Space Environment. Accordingly, it is very useful system. Because Daylight Duct System of Daylighting System gives high performance for its price, distribution rate is very high. But Daylighting Duct System is hard to accurate control. Accordingly, it is difficult to maintain continuously Daylight Environment in Interior Spaces. Lighting Diffusion System has been developed that it is Applying the principle of Reflector and prism diffuser for maximize the efficiency of lighting of Daylight Duct Systems through this study. And then compare lighting performance of Existing System and new Lighting Diffusion System through producing a mock-up. Thus, this study was carried out for the purpose of verification for excellence. It is that installed Each Daylighting Duct System for performance evaluation in a laboratory of width 4m, length 10m, height 2.5m. And illuminance was measured at noon on winter solstice(December 22) under clean sky. The actual measurement result was in the following. Newly developed lighting Diffusion system was measured maximum illuminance 399, minimum illuminance 221, average illuminance 141. Synthetically, daylight factor, uniformity factor and illuminance distribution were improved more than existing system. As a result, it was confirmed that was improved lighting Environment in Interior Spaces.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.105-109
• /
• 2019

LED lighting is used as artificial lighting for plant growth because it has high light efficiency and can radiate light of various wavelengths. In this paper, we have developed new structure LED lighting module to improve the performance of LED lighting for plant growth and proposed a lighting control system that can be controlled wirelessly. The proposed LED lighting module was fabricated using optical lens applied to tunnel light and simulated using Relux program. Results of simulation, we confirmed that the light distribution and average illuminance of the proposed lighting were improved. LED lighting control system was developed to wirelessly control R, G, B, W LED lighting according to plant type and growing season. Therefore, it is expected to provide the optimal lighting environment for plant growth and contribute to the improvement of farm productivity and convenience.