• Journal of Biosystems Engineering
• /
• 제17권4호
• /
• pp.344-353
• /
• 1992

This study was carried out to develop a fully-controlled plant growth system for studying the effects of environmental factors on plant growth. The plant growth system consists of the growth chamber, the measurement system for sensing and signal conditioning the environmental factors and the control system which includes control algorithm required for optimum operation and on-line monitoring. The results of the study on the performance of the controlled plant growth system are summarized as follows : 1. Under the light intensity of 18,000~20,000 lux, the temperature was controlled in the range of $22{\pm}0.4^{\circ}C$, the relative humidity of $70{\pm}5%$ respectively. 2. The $CO_2$ concentration was controlled in the range of $1,000{\pm}40ppm$(from 1st to 4th day) and $1,500{\pm}40ppm$(from 4th to 9th day). 3. The electric conductivity(EC) and pH of the nutrient solution were controlled in the range of $1.9{\pm}0.2mS/cm$ and $6.8{\pm}0.5pH$ respectively. 4. Under the above environmental conditions, the average fresh weight of leaf lettuce increased from 10g to 74g in 9 days with 24 hour lighting.

• Plant Biotechnology Reports
• /
• 제4권4호
• /
• pp.303-309
• /
• 2010

Endoreduplication is a developmental process that is unique to plants and occurs in all plants. The present study aimed to assess endoreduplication in various explant tissues and regenerated somatic embryos of Doritaenopsis. We further investigated the effects of light quality on endoreduplication and somatic embryo proliferation. To this end, we studied endoreduplication in leaves and root tips from regenerated plantlets and somatic embryos and in developing somatic embryos under 4 types of lighting conditions: red light, red + far-red light, red + blue light, and white light. We found that the degree of endoreduplication varied in different explants, and that the choice of explants used also influenced the ploidy levels of the newly regenerated somatic embryos. The DNA content of the leaf (2C-8C) was less than that of the root tip (2C-16C) and somatic embryo (2C-64C). In terms of light quality, the combination of red and far-red light produced the highest number of somatic embryos, while maintaining a low degree of endoreduplication. The data obtained indicate that this light combination stimulates somatic embryogenesis in Doritaenopsis and may exert some control on endoreduplication during cell division. These findings can be applied to achieve a reduction in somaclonal variations for the purpose of mass proliferation and genetic improvement.

• 한국산업융합학회 논문집
• /
• 제15권3호
• /
• pp.87-94
• /
• 2012

Kruithof demonstrated the preferred combination of illuminance levels and color temperatures. However, as Benett pointed out, difference of themal variables in such preference may be expected. The purpose of this study is to clarify the combined effects of lighting conditions(illuminance, color temperature), operative temperature on the human physiological and psychological responses. In order to observe operative temperature change in preference of color temperatures for three illumination levels, three subjects were exposed to two different conditions of color temperatures of 2,850K, 4,200K and 6,850K combined with operative temperatures(OT) of $25{\sim}31^{\circ}C$ at 100~1000lx. Thermal sensation vote and comfortable sensation vote, brightness perception vote were reported in each experiment conditions. The following results were obtained : 1) When illuminace level was at 100lx in operative temperatures of OT $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$, Color temperature affect not themal sensation but Warm-cool sensation. 2) Operative temperatures affect not brightness perception vote but visual comfort sensation vote, satisfactive sensation vote, warm-cool sensation vote and themal sensation vote.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.188-193
• /
• 2008

According to introduce KTX in Korea, rail-road bridge section of KTX was increased approximately 50% of the total length. Bridge is required periodic inspection and check to prevent accident and hazard because various damage which have effects on traffic and replacement of damaged parts is difficult. Specifically, the train as large-scale transportation because accidents led to great damage, preventing these accidents are critical. Well-organized management and maintenance systems are required to prevent the accidents. In the case of roadway bridge, bridge inspection vehicle is used to deploy inspectors in roadway bridge. However, this method requires a lot of time and efforts, and inspectors are exposed to potential hazard. Also, surrounding environment like poor lighting system or electric wire could harm the inspector while repairing. Due to this reason, automatic repairing and inspecting system have been introduced to replace the old methods. Management system of the railroad bridge track for trains uses various advanced equipments, but whereas roadway bridge management system is lacking these efforts. As a result of that, this study looks over the existing management method. and review the method to apply the Bridge Inspection Robot in railroad bridge. Moreover, this study suggests future management technology using inspection robot.

• 한국컴퓨터정보학회논문지
• /
• 제21권2호
• /
• pp.89-96
• /
• 2016

This study analyzed with the case analysis of a series of processes from job analysis survey. And results analysis, and academic achievement in order to transform the curriculum of existing courses into the curriculum of NCS-based courses. Also this study analysed of the existing curriculum. Also analyzed the trend of workforce trends and needs of the broadcasting content industry. Through a needs analysis for the industry and alumni and students, video graphics, video editing and video directing were selected. In this paper, it dealt mainly with respect to the video graphics in a dual job. Modeling capability into the unit through a job analysis, animation, effects and lighting were chosen accordingly based introduction of 3D Graphics. Application of 3D Graphics were derived two courses and selected profiles and performance criteria. This training according to the NCS curriculum for students was evaluated based on the student's job was to investigate the learning ability. Academic achievement were the result satisfaction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1639-1642
• /
• 1994

The severe conditions such as rated voltage of 800kV, gas pressure of $5kg/cm^2$ and rated lighting impulse withstand voltage of 2400kV were adopted for the design of spacers in the 800kV GIS to give a sufficient design margin. The design criteria on the maximum electric field strength of the center conductor and the insulator surface were established by considering the insulator surface characteristics, electrode area and surface effects in the unequal electric field strength of the given gap. The design parameters such as inter/outer envelope degree, thickness, inter/outer inserts, triple junction gap were determined by calculating the electric field using FLUX-2D program package and by referring to the published papers. The mechanical stress analysis was conducted on the feasible model spacers that showed good electric field distributions to confirm the sufficient mechanical design margin. The 800kV spacer designed as described above is now in the process of manufacturing.

• KIEAE Journal
• /
• 제12권6호
• /
• pp.123-128
• /
• 2012

A window increases the lighting quality of a space by allowing daylight into the space, and maintains visual contact with the outside. Moreover, the window with a preferred view provides many benefits such as psychological satisfaction, occupants' health and improved environmental quality. This study aimed to investigate how view elements and window luminance influence occupants' seating preference in a living room. The experiment was carried out in a mock-up model with thirty-two subjects (17 men and 15 women). The nine seating positions in a living room have different view such as natural view (trees or sky) and man-made view (paving and roof top). Subjects were asked to select a position in the room where they felt most visual comfort. Simultaneously Photolux 2.1 software was used to analyze the window luminance. The experiment results indicated that subjects prefer to be seated near a window and feel comfort in a seating overlooking the trees and sky. This would indicate that the natural elements of the view and a distance to the window affect seating preference to the occupants.

• 전자공학회논문지 IE
• /
• 제45권4호
• /
• pp.60-67
• /
• 2008

피부색은 자동화된 얼굴 인식을 위한 매우 중요한 정보 중의 하나이다. 본 논문에서는 컬러 정보와 피부색 모델을 이용한 피부 영역 검출 기법을 제안하였다. 제안된 방법은 적응적 조명 보정 기법을 통해 피부색 영역의 검출 성능을 개선하였고 전처리 필터를 적용하여 피부색이 아닌 영역을 먼저 제거시킴으로써 처리 속도를 향상시켰다. 또한 피부색 검출 성능이 우수한 ST 컬러 공간을 수정하여, 보다 정확한 피부색 영역을 추출할 수 있도록 하였다. 제안된 방법의 실험 결과 기존의 방법과 비교하여 보다 우수한 검출 결과를 나타냈으며, 처리 속도 또한 약 $33{\sim}48%$ 향상시킬 수 있었다.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.364-375
• /
• 2012

This study investigates the effects of interior design elements on the satisfaction and preference for space. Field measurements and surveys were conducted in three coffeeshops where various interior design elements were applied. Results indicate that movable tables and chairs for two people were preferred in the space. They need to be placed flexibly according to the visitors' needs to improve satisfaction for convenience. To improve spatial satisfaction, the brightness of color applied to wall surfaces was recommended to be lower than that of color used for floor surfaces. The surfaces of space and interior design elements such as furniture also need to be kept clean. Lamps with lower color temperature were effective to enhance spatial satisfaction. Light sources should be shielded when a pendant lighting system with general diffuse type was used in space. Natural daylight through window was also required for better satisfaction level. Multiple linear regression implied that the cozy feeling by electric light, existence of daylight, flexible layouts for tables and chairs, color and quality of material for tables and floor were significant contributors to overall spatial satisfaction.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2008년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2008

The one of the most important thing for the successful realization of display functions in modern exhibition activities is based on exhibition space and the information communication between designers and visitors. Therefore, the information transmission has become an important function of modern exhibition activities. How to transmit information effectively is the key factor of successful exhibition design. However, 'people flow' and 'transportation' are taken as the main issues for a lot of the design works in space design of exhibition. But the information transmission is seldom taken into account as an important factor. The ultimate objective of exhibition design is to transmit the exhibits' information effectively to visitors, so the effective transmission of exhibiting information becomes the most important criteria in exhibition design. The successful exhibition can be well designed through information transmission by means of material objects, a lighting, properties, sounds, color, performance, etc The successful effects of the exhibition also depends on a great extent of the display design and a modeling in exhibition space. Modern exhibition design is getting more importance on the research on forms including basic features and exhibition space relations of forms. This research discusses on the design method that is favorable to information transmission In order to deal with the factor of display and modeling in exhibition space.