• Physical Therapy Korea
• /
• v.13 no.4
• /
• pp.79-86
• /
• 2006

The purpose of the current experiment was to describe interlimb coordination when swing limb conditions are being manipulated by constraining step length or by adding a 5 or 10 pound weight to the swing limb distally. Subjects were asked to begin walking with the right limb to land on the primary target (normal step length) that is 10 cm in diameter. However, if, during movement, the light was illuminated, then the subject had to step on one of the secondary targets (long and short step length). These three step length conditions were repeated while wearing a 5 pound ankle weight and then when wearing a 10 pound ankle weight. Ground reaction force (GRF) data indicated that there were changes in the forces and slopes of the swing and stance Fx GRFs. Long stepping subjects had to increase the propulsive force required to increase step length. Consequently, swing and stance toe-off greatly increased in the long step length condition. Short step length subjects had to adequately adjust step length, which decreased the speed of gait initiation. Loading the swing limb decreased the force and slope of the swing limb. Swing and stance toe-off was longest for the long step length condition, but there was a small difference of temporal events between no weight and weight condition. It appears that subjects modulated GRFs and temporal events differently to achieve the peak acceleration force of the swing and stance limb in response to different tasks. The findings from the current study provide preliminary data, which can be used to further investigate how we modulate forces during voluntary movement from a quiet stance. This information may be important if we are to use this or a similar task to evaluate gait patterns of the elderly and patient populations.

• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.191-197
• /
• 2017

This development is for non-destructive machine using X-Ray source about detecting outline faults of below middle size products. The differentiation is product of research and development unspecialized small and medium-sized products using X-Ray light sources can check real time if the surface of an external fault of radiation dose reference, within the leakage. The speed control is possible by software solution. In addition, we're working on possibly block doors for worker safety and equipment at the same time that inner drive can be identified in the image. These principles, as a key enabler of the current inspection system such as the container is small to medium-sized parts - a long way from utilization level is possible. This research will give rise to major effects for other various non-destructive market industries except car-industry. The most important fact is that this developed non-destructive machine is controlled below $0.2micro-S{\mu}v$.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.2
• /
• pp.501-510
• /
• 1999

We have seen a rapid development of multimedia intustry as computer evolves and the internet has changed our way of life dramatically in these days. There we several attempts to teach elementary statistics on the web but most of them are based on commercial products. The need for statistical data analysis and decision making based on those analysis is growing. In this article we try to show one way of reaching that goal by using a server side scripting language PHP3 toghether with extra graphical module and statistical distribution module on the web. We showed some elementary exploratory graphical data analysis and statistical inferences. There are plenty of room of improvements to make it a full blown statistical analysis tool on the web in the new future. All the programs and databases used in our article we public programs. The main engine PHP3 is included as an apache web server module so it is very light and fast. It will be much better when the PHP4(ZEND) will be officially out in terms of processing speed.

• Journal of Periodontal and Implant Science
• /
• v.30 no.4
• /
• pp.803-814
• /
• 2000

Current acceptable methods of promoting periodontal regeneration are basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, biological mediators. Platelet Rich Plasma have been reported as a biological mediator which regulate activities of wound healing progress including cell proliferation, migration, and metabolism. The purpose of this study is to evaluate the possibility of using the Platelet Rich Plasma as a regeneration promoting agent for furcation involvement defect. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on mandibular third(P3), forth(P4) and fifth(P5) premolar. 2 month later experimental group were PRP plus bovine bone and bovine bone only. After 4, 8 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. At 4 weeks after surgery, there were rapid osteogenesis phenomenon on the defected area of the Platelet Rich Plasma plus bovine bone group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 4 weeks after surgery. In conclusion, Platelet Rich Plasma can promote rapid osteogenesis during early stage of periodontal tissue regeneration.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.119-126
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulation. During a few decades, the great effort has been made by International Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study is aimed at investigating a complicated structural response of bow structures of oil carriers for assessing the energy dissipation and crushing mechanics of striking vessel through a methodology of the numerical analysts for the various models and its design changes. Through this study an optimal bow construction absorbing great portion of kinetic energy in the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of response analysis procedures are performed as follows; 1). 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in two conditions. 2). 21 models conisted of 5 size of full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3). 36 models of 100k oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary mombers, framing system and colliding conditions, etc.

• The KIPS Transactions:PartB
• /
• v.14B no.3 s.113
• /
• pp.191-198
• /
• 2007

In this paper, we present a marker detection and recognition method from camera image for a disabled person to interact with a server system which can control appliance of surrounding environment. It converts the camera image to a binary image by using multi-threshold and extracts contours of objects in the binary image. After that, it approximates the contours to a list of line segments. It finds rectangular markers by using geometrical features which are extracted from the approximated line segments. It normalizes the shape of extracted markers into exact squares by using the warping technique. It extracts feature vectors from marker image by using principal component analysis and then recognizes the marker. The proposed marker recognition system is robust for light change by using multi-threshold. Also, it is robust for angular variation of camera by using warping technique and principal component analysis. Experimental results show that the proposed method achieves 100% recognition rate at maximum for 21 markers and execution speed of 12 frames/sec.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.179-183
• /
• 2005

The High-tensile steel has been recognized as a promising concept for structural design of light weight transportation systems such as aircraft high speed trains and fast ships. Using the high-tensile steel has been widely used in ship structures, and this enables to reduce the plate thickness. Using the high-tensile steel effectively for a ship hull, the plate thickness becomes thin so that plate buckling may take place. Therefore, precise assessment of the behavior of plate above primary buckling load is important. In this study, examined closely secondary buckling behavior after initial buckling of thin plate structure which operated compressive load according to the various kinds of yield stress with simply supported boundary condition. Analysis method is F.E.M by commercial program(ANSYS V7.1) and complicated nonlinear behaviour can analyze using art-length method about secondary buckling.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.23-34
• /
• 2020

Recently, the artificial intelligence deep learning field has been hard to commercialize due to the high computing power and the price problem of computing resources. In this paper, we apply a double pruning techniques to evaluate the performance of the in-depth neural network and various datasets. Double pruning combines basic Network-slimming and Parameter-prunning. Our proposed technique has the advantage of reducing the parameters that are not important to the existing learning and improving the speed without compromising the learning accuracy. After training various datasets, the pruning ratio was increased to reduce the size of the model.We confirmed that MobileNet-V3 showed the highest performance as a result of NetScore performance analysis. We confirmed that the performance after pruning was the highest in MobileNet-V3 consisting of depthwise seperable convolution neural networks in the Cifar 10 dataset, and VGGNet and ResNet in traditional convolutional neural networks also increased significantly.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.321-326
• /
• 2007

The contents of reef container face a risk of being damaged if the interior temperature and certain maintenance conditions for the shipments cannot be met. Currently, the temperature and other conditions within a reefer container is checked manually and periodically by someone in charge of it. Since it means that there is no real-time checking of the conditions, if something goes wrong, there is no immediate means of correcting the problem. This paper introduces reefer container monitoring system, that checks interior temperature of container on real-time by sensor nodes attaching reefer container using wireless sensor network. It senses the temperature, amount of light, motion and the change in speed of the objects that distributes sensors throughout the desired places and sends the data wirelessly to anyone interested. Because the prosed technique can check the temperature and other conditions within a reefer container on real-time basis, it enables efficient and effective maintenance of temperature and other conditions

• Journal of Periodontal and Implant Science
• /
• v.28 no.3
• /
• pp.431-451
• /
• 1998

4 beagle dogs aged over one and half years and weighed 15 to 16 Kg were utilized in this study. Experimental dehiscent defects were made in the mandibular edentulous area after removal of lower premolar. e-PTFE membrane resorbable membrane, and PDGF-BB-loaded resorbable membrane were covered at the dehiscent defects around the dental implants respectively. Animal was sacrificed at 1, 2, 3 months respectively. Non-decalicifed specimens were made and mutiple-stained for light microscopic study. The results were as follows: 1. Dehiscent defects around the implant installed in the beagle dog were an excellent defect model for studying guided bone regeneration. 2. Fibroblasts penetrated into expanded-PTFE membrane was observed and inflammatory cell infiltration was also observed around the membrane. 3. Resorbable membrane was degradaded and resorbed at 1 month after application to the dehiscent defect. Though multinucleated giant cells were observed adjacent to the membrane, that had no reverse effect on the boe regeneration. 4. PDGF-BB-Ioaded resorbable membrane was same capability as the resorbable membrane and e-PTFE membrane in the guided bone regeneration. 5. PDGF-BB-Ioaded resorbable membrane-applied site was better than resorbable membrane-applied site in the speed and maturity of bone formation. Within the above results, it was suggested that PDGF-BB-Ioaded resorbable membrane might have same bone regeneration capacity as nonresorbable membrane in the dehisced implant of the beagle dog and potentiality to use in human subjects.