• 제목/요약/키워드: Light-weight design

검색결과 814건 처리시간 0.023초

경통고정식 자동무수차점 널 렌즈 테스트법을 이용한 직경 300 mm(f/1.98) 알루미늄 쌍곡면 거울의 형상측정 (Evaluation of a Aluminum Hyperbolic Mirror with the Diameter of 300 mm(f/1.98) by Using the Autostigmatic Null Lens System Assembled in a Fixed Tube Mount)

  • 이영훈;조재흥;임천석;양순철;김건희;원종호;정연홍
    • 한국광학회지
    • /
    • 제17권5호
    • /
    • pp.412-419
    • /
    • 2006
  • 초정밀 비구면 기공기로 제작한 구경 300 mm이고 f-수가 1.98인 알루미늄 쌍곡면 거울의 형상을 측정하기 위하여 자동무수차점 널(null) 렌즈 광학계를 설계하고 제작하였으며, 이를 이용하여 이 대구경 쌍곡면 거울의 형상을 측정하였다. 이때 널 렌즈간 정렬은 구조적으로 안정하고 부피가 작은 경통고정식을 선택하였고, 널 렌즈 및 경통의 제작 허용오차는 요구되는 측정 정밀도를 만족하도록 공차분석기법을 통하여 계산하고 제작하였다.

클러스터를 이용한 고성능 RC4 암호화 하드웨어 설계 (The Design of a High-Performance RC4 Cipher Hardware using Clusters)

  • 이규희
    • 한국정보통신학회논문지
    • /
    • 제23권7호
    • /
    • pp.875-880
    • /
    • 2019
  • RC4 스트림 암호화는 내부 구현이 간단하고 빠르게 암호화 할 수 있는 초경량 암호화 알고리즘으로 IEEE 802.11의 WEP와 IEEE 802.11i의 TKIP 등에 널리 이용되고 있다. RC4는 IoT 등의 제한적 자원을 갖는 시스템들에도 사용되지만 성능상 제약이 있다. RC4 암호화는 S-배열과 K-배열의 초기화 및 랜덤화를 수행하는 KSA(Key Scheduling Algorithm)와 랜덤화된 S-배열을 이용하여 암호문을 생성하는 PRGA(Pseudo-Random Generation Algorithm)의 두 단계로 구성된다. 본 논문에서는 KSA에서 발생하는 초기화 지연시간을 줄이기 위해, 랜덤화 과정에 초기화를 삽입하여 함께 처리한다. KSA의 랜덤화에서 교환(swap) 작업과 PRGA의 암호문 생성은 클러스터를 이용하여 매 클록마다 두 개의 교환 및 암호문이 생성되도록 하였다. 제안된 RC4 암호화 하드웨어 구조는 초기화 지연시간이 발생하지 않으며, 랜덤화와 키 스트림 생성율에서 다른 연구들과 비교하여 약 2배에서 6배의 성능이 향상되었다.

해양 IoT 서비스를 위한 920 MHz 대역의 PCB 패턴 안테나 (PCB Pattern Antenna of 920 MHz Band for Marine IoT Services)

  • 이성렬
    • 한국항행학회논문지
    • /
    • 제23권5호
    • /
    • pp.430-436
    • /
    • 2019
  • 해상 및 산업 현장의 다양한 IoT 서비스를 위한 시스템에 필수불가결한 장치인 안테나 개발에 있어 초소형, 경량 및 다중 대역 동작이 요구된다. 이러한 요구를 반영할 수 있는 대표적인 안테나의 한 종류가 PCB 패턴 안테나이다. 본 연구에서는 920 MHz 단일 대역 PCB 패턴 안테나의 설계 및 제작에 대하여 살펴보았다. 제안된 920 MHz 단일 대역 안테나의 PCB 패턴을 260 MHz 대역에서도 동작하도록 수정 보완하여 이중 대역 PCB 패턴 안테나를 제작하는 것이 최종 목표이다. 본 연구를 통해 920 MHz의 ISM 대역 중 902 MHz, 915 MHz와 928 MHz에서 우수한 성능을 얻을 수 있었다. 또한 전압 정재파비, 반사 손실, 이득과 효율 등의 주파수별 차이가 5% 미만이었다. 이러한 결과를 -30 dB의 수신 감도를 갖는 LPWA (low power wide area) 네트워크에 적용하면 최소 5-10 km의 통신 링크 구축이 가능할 것으로 예측할 수 있다.

맞춤형 리모델링에 대한 실효성 검증 연구 - 리모델링을 추진중, 완공한 공동주택을 중심으로 - (Investigation into the Effectiveness on Customized Remodeling - Focusing on apartment houses completed during remodeling -)

  • 윤향승;김기수
    • 대한건축학회논문집:계획계
    • /
    • 제34권7호
    • /
    • pp.3-12
    • /
    • 2018
  • The present remodeling makes almost no difference from rebuilding as all the building materials are removed remaining frame structure only. And, in case of vertical extension of building, higher construction cost and safety problem occur. The Ministry of Land, Transport and Maritime Affairs, therefore, recommends customized remodeling that can be made in light of the resident' needs such as parking lot, elevator, bathroom, and room for the alternative of remodeling of vertical extension of building. The purpose of this study is to present real data that can be referred to the constructor's decision making before starting the remodeling, by investigating and analyzing the weight and importance between evaluation factors for customized remodeling at the completed time of remodeling. Accordingly, the factors were divided into environmental factor, social factor, and economical factor, and the survey was performed for the residents living in remodeling houses. In addition, for the professionals, AHP (Analytic Hierarchy Process) has been carried out for the priority in the customized remodeling. For environmental factor, the level of importance made difference from that before remodeling, except parking level. For social factor, every item, including psychological satisfaction and community satisfaction, made difference. For economical factor, the recognition level of importance in rent made difference, except sale price of the factor for price satisfaction. In case of the factor for cost satisfaction, it was checked that construction cost and administration cost both could be considered important. As a result of AHP, the most importantly emphasized item was construction cost, and sale price, administration cost, residence structure, and parking lot were followed by priority in order. This study could contribute to reliably settle down customized remodeling by giving reasonable and substantial help from the analysis of the differences in the customized remodeling items before/after the remodeling.

5.1~5.8 GHz 무선랜용 CPW 급전 소형 모노폴 안테나 (A CPW-fed Small Monopole Antenna for 5.1~5.8 GHz WLAN)

  • 최인태;신호섭
    • 한국정보통신학회논문지
    • /
    • 제23권12호
    • /
    • pp.1659-1665
    • /
    • 2019
  • 본 논문에서는 WLAN (wireless local area network) 응용을 위한 소형 인쇄형 모노폴 안테나의 새로운 설계에 대해 연구했다. 선폭이 다른 패치와 계단 모양의 접지면이 있는 복사체는 안테나 크기를 줄이기 위해 사용된다. 안테나의 크기는 16 × 17 × 1 ㎣이며 포토리소그래피(photolithography) 기술로 제작되었다. 시뮬레이션 및 측정 결과가 잘 일치한다. 연구된 안테나의 공진 주파수는 약 5.2 GHz이며 측정 결과 1 GHz의 임피던스 대역폭을 가진다. 또한 측정된 방사패턴을 제시하고 필요한 WLAN 5 GHz 주파수 대역 (5.15 - 5.825 GHz)에서 측정된 이득 및 효율을 제시했으며, 5 GHz 대역 WLAN 안테나로 사용할 수 있음을 확인했다. 연구된 안테나는 소형, 경량, 저비용, 전방향성 복사패턴, 고이득 및 고효율을 갖는다.

해양 부이용 920 MHz 대역 안테나 (920 MHz Band Antenna for Marine Buoy)

  • 최형동;김성율;이성렬
    • 한국항행학회논문지
    • /
    • 제24권6호
    • /
    • pp.593-600
    • /
    • 2020
  • 해양 IoT 서비스를 위한 장치들은 해양 환경에 강인해야 한다. 특히 바닷물 속에 부유하는 전송 장치는 바닷물의 영향을 덜 받도록 설계되어야 한다. 본 연구에서는 전자 어구 실명제 모니터링 시스템에서 어구 상태를 감시하는 부이에 내장되는 안테나를 설계하고 제작한 결과를 보이고 있다. 안테나의 주파수 대역은 920 MHz이고, 부이의 초소형과 경량화를 위해 PCB 패턴 안테나 구조로 설계 제작되었다. 시뮬레이션 결과 제안한 안테나를 내장한 부이가 바닷물 속에 잠기는 정도가 심할수록 반사 계수 증 RF 특성이 저하되지만 빔의 방사 각도는 안테나 하층부에서 점점 상층부로 옮겨가는 것을 확인하였다. 즉 바닷물의 영향을 많이 받을수록 전파 성능은 저하되지만 방사 특성은 해양 IoT 서비스 환경에 적합하다는 것을 확인하였다. 향후 RF 성능을 개선할 수 있는 안테나 구조를 변경 설계하면 제안한 안테나와 부이는 LPWA (low power wide area) 기반 IoT 네트워크 구현에 기여할 것으로 기대된다.

Flexural bearing capacity and stiffness research on CFRP sheet strengthened existing reinforced concrete poles with corroded connectors

  • Chen, Zongping;Song, Chunmei;Li, Shengxin;Zhou, Ji
    • Structural Monitoring and Maintenance
    • /
    • 제9권1호
    • /
    • pp.29-42
    • /
    • 2022
  • In mountainous areas of China, concrete poles with connectors are widely employed in power transmission due to its convenience of manufacture and transportation. The bearing capacity of the poles must have degenerated over time, and most of the steel connectors have been corroded. Carbon fiber reinforced polymer (CFRP) offers a durable, light-weight alternative in strengthening those poles that have served for many years. In this paper, the bearing capacity and failure mechanism of CFRP sheet strengthened existing reinforced concrete poles with corrosion steel connectors were investigated. Four poles were selected to conduct flexural capacity test. Two poles were strengthened by single-layer longitudinal CFRP sheet, one pole was strengthened by double-layer longitudinal CFRP sheets and the last specimen was not strengthened. Results indicate that the failure is mainly bond failure between concrete and the external CFRP sheet, and the specimens fail in a brittle pattern. The cross-sectional strains of specimens approximately follow the plane section assumption in the early stage of loading, but the strain in the tensile zone no longer conforms to this assumption when the load approaches the failure load. Also, bearing capacity and stiffness of the strengthened specimens are much larger than those without CFRP sheet. The bearing capacity, initial stiffness and elastic-plastic stiffness of specimen strengthened by double-layer CFRP are larger than those strengthened by single-layer CFRP. Weighting the cost-effective effect, it is more economical and reasonable to strengthen with single-layer CFRP sheet. The results can provide a reference to the same type of poles for strengthening design.

다기능 반려동물 이동장 디자인 개발- 소형 반려견을 중심으로 - (Development of a multi-functional companion animal cage design - Focusing on small companion dogs -)

  • 최미화;이찬미;유나현;양혜림
    • 복식문화연구
    • /
    • 제31권2호
    • /
    • pp.262-276
    • /
    • 2023
  • This study aims to develop a multi-functional cage for dogs as a house to reduce their anxiety when they go out using cages. This study investigates the types and characteristics of cages and cage preference by surveying men and women in their 20s who use them. The cage product reviews are also analyzed. The research results are as follows: First, domestic dog cages are classified into crate, shoulder, cross (sling bag), backpack, carrier, and stroller types. The crate type is easy to clean and can be used as a house, but it is bulky and therefore inconvenient to carry when using public transportation. The shoulder type is a fabric material with good air permeability but has the disadvantage of being easily soiled. It can be used as a house and is light weight, making it convenient when using public transportation. Second, as a result of consumer research, respondents prefer the shoulder-type fabric over the crate-type plastic material. Third, from the shoulder-type product review, the shape stability, companion dogs' psychological safety, the wearability of companions, and management convenience are derived. Fourth, based on the survey results, a multi-functional cage is developed taking into account the companion dog, companion person, and functional factors.

Unsteady galloping of sharp-edged bluff bodies: experimental observations on the effect of the wind angle of attack

  • Chen, Cong;Dai, Bingyu;Wieczorek, Niccolo;Unglaub, Julian;Thiele, Klaus
    • Wind and Structures
    • /
    • 제35권4호
    • /
    • pp.255-268
    • /
    • 2022
  • Light-weight or low-damped structures may encounter the unsteady galloping instability that occurs at low reduced wind speeds, where the classical quasi-steady assumption is invalid. Although this unsteady phenomenon has been widely studied for rectangular cross sections with one side perpendicular to the incidence flow, the effect of the mean wind angle of attack has not been paid enough attention yet. With four sectional models of different side ratios and geometric shapes, the presented research focuses on the effect of the wind angle of attack on unsteady galloping instability. In static tests, comparatively strong vortex shedding force was noticed in the middle of the range of flow incidence where the lift coefficient shows a negative slope. In aeroelastic tests with a low Scruton number, the typical unsteady galloping, which is due to an interaction with vortex-induced vibration and results in unrestricted oscillation initiating at the Kármán vortex resonance wind speed, was observed for the wind angles of attack that characterize relatively strong vortex shedding force. In contrast, for the wind angles of attack with relatively weak shedding force, an "atypical" unsteady galloping was found to occur at a reduced wind speed clearly higher than the Kármán-vortex resonance one. These observations are valid for all four wind tunnel models. One of the wind tunnel models (with a bridge deck cross section) was also tested in a turbulent flow with an intensity about 9%, showing only the atypical unsteady galloping. However, the wind angle of attack with the comparatively strong vortex shedding force remains the most unfavorable one with respect to the instability threshold in low Scruton number conditions.

Effect of wild ginseng on the laying performance, egg quality, cytokine expression, ginsenoside concentration, and microflora quantity of laying hens

  • Habeeb Tajudeen;JunYoung Mun;SangHun Ha;Abdolreza Hosseindoust;SuHyup Lee;JinSoo Kim
    • Journal of Animal Science and Technology
    • /
    • 제65권2호
    • /
    • pp.351-364
    • /
    • 2023
  • The experiment was carried out to study the effect of Korean wild ginseng adventitious root supplementation on the laying performance, egg quality, cytokine expression, ginsenoside concentration, and microflora quantity of Institut de selection Animale (ISA) brown laying hens at 24 weeks old. A total of 90 laying hens were subjected to a completely randomized design at three treatments, five repetitions and six laying hens per replicate. The experiments were divided by diets into the basic feed (CON), basic feed + 0.1% wild ginseng (WG1), and basic feed + 0.5% wild ginseng (WG2). The feeding trial was carried out over a duration of 12 weeks after an initial acclimation period of 2 weeks. Feeds and water were administered ad libitum in mash form, and light was available for 16 hours per day. At the end of study, henday egg production (HDEP), average egg weight (AEW), and egg mass (EM) were increased (p <0.05) in WG2 at week 12. Feed conversion ratio (FCR) was decreased (p < 0.05) in WG2 at week 12. The ginsenoside content in egg yolk was increased (p <0.05) in laying hens in the WG2 treatment at week 12. Relative expression of tumor necrosis factor alpha (TNF-α) was reduced (p < 0.05) in the WG supplemented diets at week 12. The fecal microflora quantity of Lactobacillus was increased (p < 0.05) in WG2 at week 8 to week 12, and Escherichia coli (E. coli) was significantly decreased (p < 0.05) in the WG2 at week 12. We concluded that the result observed in the HDEP, AEW, EM and FCR was due to an increase in ginsenoside content, leading to an improvement in the TNF-α, and fecal microflora quantity such as Lactobacillus and E. coli in the WG2 supplemented diets. We therefore recommend the use of WG at application level 0.5% per basal diet for optimum laying performance in layer hens.