• 한국건축시공학회지
• /
• 제8권6호
• /
• pp.131-137
• /
• 2008

In recent years, the light-weight aggregate has widely been used to reduce the weight of construction structures, and to achieve the thermal insulation of building structures. The purpose of this study is to evaluate the heat resistance of polymer concrete composites with light-weight aggregate made by binders as resin and cement with polymer dispersion. The light-weight polymer concrete composites are prepared with various conditions such as binder content, filler content, void-filling ratio, light-weight aggregate content and polymer-cement ratio, and tested for heat resistant test, and measured the weight reducing ratio, strengths and exhaustion content of gas such as CO, NO and $SO_2$. From the test results, the weight reducing ratio of light weight polymer concrete using UP binder after heat resistance test increase with an increase in the UP content irrespective of the filler content. The weight reducing ratio of polymer cement concrete is considerably smaller than that of UP concrete. In general, the strengths after heat resistance of polymer concrete composites are reduced about 40 to 65% compared with those before test. The exhausted quantity of CO, NO and $SO_2$ gases in polymer concrete composites is less than EPS(Expanded poly styrene). From the this study, it is confirmed that the many types gases discharge according to binder type of polymer concrete composites, its amount is controlled by selection of the binder type and mix proportions.

• 한국건설순환자원학회논문집
• /
• 제3권4호
• /
• pp.374-381
• /
• 2015

화재에 대한 건축물의 내화성능 확보를 위해서는 온도가 상승하더라도 허용범위 이내로 제어하고 탈락이나 손상 등이 발생하지 않아야 한다. 이에 대한 대책으로 부재 외면에 내화모르타르로 마감을 하는 것이 가장 효율적인 방법이다. 내화 마감모르타르는 고온에서 강도변화가 작고 열적으로 안정하며 열전도율이 낮은 경량재료라면 효과적으로 성능발현이 가능할 것이다. 본 연구는 내화 마감모르타르 개발을 위한 연구로 비교적 내화성능이 우수한 플라이애시 및 메타카올린 기반의 알칼리 활성화 결합재와 펄라이트 및 유리 발포 경량골재의 고온 특성에 대해 검토하였다. 실험결과 열전도율이 낮고 고온에서 비교적 안정적인 특성을 발현하여 내화 마감모르타르로 적용이 가능할 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.197-198
• /
• 2010

본 연구는 다공성 인공 경량골재를 사용한 콘크리트와 보통 골재를 사용한 콘크리트의 염해에 대한 저항성을 비교하고, 그 실용성을 확인하는데 목적을 두었다. 그 결과, 인공 경량골재 콘크리트의 염해 저항성은 보통 콘크리트의 염해 저항성 보다 낮음을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.414-422
• /
• 2013

As structure-borne sound, the floor impact sound is one of the serious noises in residential building. Most of heating system applied to the typical Korean residential building is floor heating system which is called ondol. The ondol usually consists of finishing material, mortar with heating coil, light-weight aerated concrete and reinforced concrete. This study focused on the isolation of heavy-weight impact sound and modification of mortar and light-weight aerated concrete. Specifically the glass foam aggregate was added on light-weight aerated concrete. Also, water-cement ratio and amount of cement on mortar were revised. The sound pressure level of heavy-weight impact was measured in reverberation chamber using both bang-machine and impact ball. The size of specimen was 1 m by 1 m. Substitution ratio of glass foam aggregate on light-weight aerated concrete shows relationship with heavy-weight impact sound pressure level. In addition, heavy-weight impact sound pressure level was decreased with increment of water-cement ratio and amount of cement on mortar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.87-88
• /
• 2011

High absorptance of lightweight aggregate make a hard product, work, quality management ect. for making low absorptance property, lightweight aggregate is coated by an organic matter and that way remarkably showed to decrease the absorptance by pre-study. but first, we would need a check to fit into the concrete which both fresh concrete and hardened concrete. In this study, mechanical property change of coated lightweight aggregate concrete was analysed by compared experiment with coated lightweight aggregate concrete and non-coated aggregate concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.131-136
• /
• 2002

In recent year, it has been investigated on the reduction of mass of structures for the purpose of the larger space and the economy with the industry developing very fast and qualitatively. So the purpose of this study is to investigate the manufacture of light weight concrete panel using the artificial light-weight aggregate as a part of the substitution of foamed styrene and polyurethane because of narrow allocable temperature zone in use. The compressive strength, flexural strength, unit weight, absorption test and thermal conductivity were practised at 3, 7 and 28 days after manufacturing the light-weight concrete lot the panel core: the filling ratio of continuous void was defied as 40%, 50%, and 60% and water-cement rate was 35, 40 and 45%. As a result of this, it was revealed that the mixture derived from filling ration of void of 50% and water-cement ratio 40% were developing the best properties of the others.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.533-536
• /
• 2006

A light-weight aggregate with a surface layer was fabricated using glass abrasive sludge and expanding agents. The glass abrasive sludges were mixed with expanding agents ($Fe_2O_3,\;graphite,\;CaCO_3$) and formed into precursors. These precursors were sintered in the range of $700-900^{\circ}C$ for 20min. The sintered light-weight aggregate had a surface layer with smaller pores and an inner region with larger pores. The surface layer and pores controlled the water absorption ratio and physical properties. As the expanding agent fraction and the sintering temperature increased, the porosity and pore size increased. The light-weight aggregate with $Fe_2O_3$ and graphite as the expanding agents had a low water absorption ratio while the porous material with $CaCO_3$ as the expanding agent had a higher water absorption ratio and more open pores.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.75-81
• /
• 2011

최근 건설되는 교량은 철근 콘크리트 대신에 주로 프리스트레스트 콘크리트 교량이 주종을 이루고 있다. 프리스트레스 콘크리트 (PSC)는 철근 콘크리트 (RC)가 지니는 균열발생 문제, 철근의 부식, 누수 등 내구성에 미치는 약점을 보완할 수 있다. 또한 프리스트레싱으로 인한 인장영역의 보완으로 인하여 구조물의 크기를 줄일 수 있다. 하지만 이러한 구조용 주재료인 고강도 콘크리트의 경우는 밀도가 강도에 비하여 상대적으로 크기 때문에 상대적으로 자중을 증대시키는 문제가 있다. 따라서 자중을 감소시킬 수 있는 경량골재를 활용한 중공형 PPC 거더 (Hollowed Prefabricated Prestressed Concrete girder systems using Light Aggregate, 이하 HPPCLA)는 이러한 문제점을 해결할 수 있는 대안이 될 수 있다. 본 연구에서는 HPPCLA 거더의 성능시험 뿐 만 아니라 수치해석을 수행하였으며, 그 결과 HPPCLA 거더는 전형적인 휨파괴 형상을 나타내었다. 수치해석에서 예상한 바와 같이 PPC 거더의 사용하중인 110 kN에서는 완전한 탄성거동으로 구조물의 사용성에는 무리가 없을 것으로 판단된다.

• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.93-100
• /
• 2004

In recent years, it has widely been studied on the light-weight composites for the purpose of the large space and thermal insulation of building structures. The purpose of this study is to evaluate the properties of light-weight composites made by binders as cement, resin and polymer cement slurry. The concrete composites are prepared with various conditions such as polymer-cement ratio, void-filling ratio, type of resin, filler content and light-weight aggregate content, tested for thermal conductivity. From the test results, the thermal conductivity of concrete composites with the binder of cement tends to decrease with increasing polymer-cement ratio, and to increase with increasing void-filling ratio. The thermal conductivity of concrete composites with the binder of resin are markedly affected by the light-weight aggregate content, type of resin and filler content. The composites made by polymer-modified concrete and polymer cement slurry have a good thermal insulation property. From the this study, we can recommend the proper mix proportions for thermal insulation Panel or concrete. Expecially. the thermal conductivity of concrete composites made by polyurethane resin is almost the same as that of the conventional expanded polystyrene resin.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.67-70
• /
• 2007

As construction industry is requiring competitive power and technique in national construction market with rapid fluctuation of construction environment and development, requirements upgrading performance in construction materials are increasing. But, national lightweight aggregate and lightweight concrete's inappropriateness when produced are also increasing. And there are not international standard of aggregates in using these construction materials because standards and characteristics of aggregate in each countries are different. Therefore, in this study, lightweight aggregate acquired due to wide range of use is tested and mixed for concrete to gain practicality and set the authorized manual in international. Also, basic data will be proposed to set a standard for concrete by analyzing lightweight aggregate characteristics. When lightweight aggregate absorptivity is high, concrete shows low strength and when it's density is low, concrete shows low weight of unit volume. Furthermore, compressive strength of lightweight aggregate is steep in first and longtime material age is tendency to cause low strength increasing rate.