• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.516-521
• /
• 2019

The electrical leakage levels of GaN-based light-emitting diodes (LEDs) containing leakage paths are estimated using photoluminescence (PL) and photovoltaic properties under photoexcitation conditions. The PL intensity and open-circuit voltage (V_OC) decrease because of carrier leakages depending on photoexcitation conditions when compared with reference values for typical LED chips without leakage paths. Changes of photovoltage-photocurrent characteristics and PL intensity due to carrier leakage are employed to assess the leakage current levels of LEDs with leakage paths. The current corresponding to the reduced V_OC of an LED with leakage from the photovoltaic curve of a reference LED without leakage is matched with the leakage current calculated using the PL intensity reduction ratio and short-circuit current of the LED with leakage. The current needed to increase the voltage for an LED with a leakage under photoexcitation from V_OC of the LED up to V_OC of a reference LED without a leakage is identical to the additional current needed for optical turn-on of the LED with a leakage. The leakage current level estimated using the PL and photovoltaic properties under photoexcitation is consistent with the leakage level measured from the voltage-current characteristic obtained under current injection conditions.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.1
• /
• pp.20-23
• /
• 2008

Organic light-emitting diodes (OLEDs) are attractive because of possible application in display with low-operating voltage, low-power consumption, self-emission and capability of multicolor emission by the selection of emissive materials. To investigated the optical effects, we studied the electrical and optical characteristics due to thickness variation of electron injection materials LiF on organic light-emitting diodes in the ITO (indium-tin-oxide)/N,N'-diphenyl-N, N'-bis(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline) aluminum $(Alq_3)/LiF$ layer/Al device. We maintained the thicknesses of TPD and $Alq_3$ layers at 40 nm and 60 nm, respectively. The deposition rates of TPD and $Alq_3$ were in the $1.5{\AA}/s$ under a base pressure of $5{\times}10^{-6}$ Torr. It was found that luminance and luminous efficiency of the device with 0.7 nm LiF layer improve 25 times and 7 times than the device without the LiF layer, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.5
• /
• pp.218-221
• /
• 2007

High-efficiency white organic light-emitting diodes(WOLEDs) were fabricated with two emissive layers and an blocking layer was sandwiched between two phosphorescent dopants, bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III(FIrpic) as the blue emission and a newly synthesized red phosphorescent material guest, bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate($(acppy)_2Ir(acac)$). This blocking layer prevented a T-T annihilation in a red emissive layer, and balanced with blue and red emission as blocking of hole carriers. The white device showed Commission Internationale d'Eclairage($CIE_{x,y}$) coordinates of (0.317, 0.425) at 22400 $cd/m^2$, a maximum luminance of 27300 $cd/m^2$ at 268 $mA/cm^2$, a maximum luminous efficiency and power efficiency of 26.9 cd/A and 18.6 lm/W.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.49-55
• /
• 2015

This paper reports solution-processed, high-efficiency organic light-emitting diodes (OLEDs) fabricated by a knife coating method under ambient air conditions. In addition, indium tin oxide (ITO), traditionally used as the anode, was substituted by optimizing the conductivity enhancement treatment of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films on a polyethylene terephthalate (PET) substrate. The transmittance and sheet resistance of the optimized PEDOT:PSS anode were 83.4% and $27.8{\Omega}/sq$., respectively. The root mean square surface roughness of the PEDOT:PSS anode, measured by atomic force microscopy, was only 2.95 nm. The optimized OLED device showed a maximum current efficiency and maximum luminous density of 5.44 cd/A and $8,356cd/m^2$, respectively. As a result, the OLEDs created using the PEDOT:PSS anode possessed highly comparable characteristics to those created using ITO anodes.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.357-361
• /
• 2009

The authors have demonstrated white oraganic light-emitting diodes (WOLED) using 1,4-bis[2-(4'-diphenylaminobiphenyl-4-yl)vinyl]benzene as fluorescent blue emitter and iridium(III) bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate as phosphorescent red emitter. The optimized WOLED using red host material as bis(2-methyl-8-quinolinato) -4-phenylphenolate exhibited proper color stability in comparison with the control device using 4,4'-N,N'-dicarbazole-biphenyl as red host. The white device showed a maximum luminance of 21100 $cd/m^2$ at 14 V, luminous efficiency of 9.7 cd/A at 20 $mA/cm^2$, and Commission Internationale de I'Eclairage ($CIE_{x,y}$)coordinates of (0.32, 0.34) at 1000 $cd/m^2$. The devices also exhibited the color shift with ${\Delta}CIE_{x,y}$ coordinates of ${\pm}$ (0.01,0.01) from 100 to 20000 $cd/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.418-420
• /
• 2009

The Authors have demonstrated high efficiency hybrid white organic light-emitting diodes (HWOLED) for reduced efficiency roll-off and color stability. It was shown that HWOLED fabricated in this study have the maximum luminance of 46 420 cd/$m^2$ at 8 V (turn-on voltage of 2.7 V), external quantum efficiency of 13.18%, power efficiency of 28.75 lm/W at 1 000 cd/$m^2$, and reduced efficiency roll-off of 2.7 times than control white device. The HWOLED also showed the stable color shift with $\Delta$Commission Internationale de I'Eclairage coordinates coordinates of ${\pm}$ (0.00, 0.00) from 100 to 10000 cd/$m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.675-678
• /
• 2007

In organic light emitting diodes (OLEDs), the electrons and holes need to be injected efficiently to obtain the best device performance. This means that a small injection barrier height at the ITO/organic interface is required. In this study, the surface of the ITO anode was treated with an Aluminum oxynitride (AlON).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.816-825
• /
• 2003

Current-voltage-luminance characteristics of organic light-emitting diodes (OLEDs) were measured in the temperature range of 10 K～300 K. Indium-tin-oxide (ITO) was used as an anode and aluminum as a cathode in the device. Organic of N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine (TPD) was used for a hole transporting material, and tris (8-hydroxyquinolinato) aluminum (Alq$_3$) for an electron transporting material and emissive material. And copper phthalocyanine (CuPc), poly(3,4-ethylenedi oxythiophene);poly(styrenesulfonate) (PEDOT:PSS), and poly(N-vinylcarbazole) (PVK) were used for hole-injection buffer layers. From tile analysis of electroluminescence (EL) and photoluminesccnce (PL) spectra of the Alq$_3$, the EL spectrum is more greenish then that of PL. And the temperature-dependent current-voltage characteristics were analyzed in the double and multilayer structure of OLEDS. Electrical conduction mechanism was explained in the region of high-electric and low-electric field. Temperature-dependent luminous efficiency and operating voltage were analyzed from the current-voltage- luminance characteristics of the OLEDS.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.405-410
• /
• 2005

High quality indium tin oxide (ITO) thin films were grown by pulse laser deposition (PLD) on flexible polyethersulphone (PES) substrates. The electrical, optical, and surface morphological properties of these films were examined as a function of substrate temperature and oxygen pressure. ITO thin films, deposited by PLD on a PES substrate at room temperature and an oxygen pressure of 15 mTorr, have a low electrical resistivity of $2.9{\times}10^{-4}{\Omega}cm$ and a high optical transmittance of 84 % in the visible range. They were used as the anode in organic light-emitting diodes (OLEDs). The maximum electro luminescence (EL) and current density at 100 $cd/m^2$ were 2500 $cd/m^{2}$ and 2 $mA/m^{2}$, respectively, and the external quantum efficiency of the OLEDs was found to be 2.0 %.

• Journal of Information Display
• /
• v.4 no.1
• /
• pp.29-33
• /
• 2003

We have investigated the effects of hole-injection buffer layer in organic light-emitting diodes using copper phthalocyanine (CuPc), poly(vinylcarbazole)(PVK), and Poly(3,4-ethylene dioxythiophene):poly(styrenesulfonate) (PEDOT: PSS) in a device structure of $ITO/bufferr/TPD/Alq_3/Al$. Polymer PVK and PEDOT:PSS buffer layer were produced using the spin casting method where as the CuPc layer was produced using thermal evaporation. Current-voltage characteristics, luminance-voltage characteristics and efficiency of device were measured at room temperature at various a thickness of the buffer layer. We observed an improvement in the external quantum efficiency by a factor of two, four, and two and half when the CuPc, PVK, and PEDOT:PSS buffer layer were used, respectively. The enhancement of the efficiency is assumed to be attributed to the improved balance of holes and elelctrons resulting from the use of hole-injection buffer layer. The CuPc and PEDOT:PSS layer function as a hole-injection supporter and the PVK layer as a hole-blocking one.