• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.130-132
• /
• 2012

In this paper, a temperature control for LED(Light Emitting Diode) lamp using a cooling fan is studied. An efficient temperature control scheme for the LED lamp using the fan wind at the lowest sound noise is studied. For the study, after measurement of the minimum sound noise of the fan and related temperature of the LED lamp through tests, experiments on temperature control of the LED lamp using the fan with various size of heat sinks was performed. To minimize the fan sound noise, optimal size of the heat sink was studied. Also, a teleoperting control of LED lamps using RF communication was studied.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.391.1-391.1
• /
• 2014

광물질로 인광물질을 사용한 유기발광다이오드(Organic Light Emitting Diode, OLED)는 재결합에 의해 형성된 여기자를 발광에 모두 이용할 수 있기 때문에 내부 양자효율이 100%로 알려져 있다. 하지만 유기층에서 발생된 빛이 소비자에게 전달되기까지의 경로에서 발생되는 wave guiding effect로 인해, 발생된 빛의 20%만이 전달된다. 특히 bottom emission type의 OLED에서 glass와 air사이의 굴절률이 달라 발생되는 전반사에 의해 손실되는 빛의 양은 35%에 달한다. 따라서 본 연구에서는 glass와 air사이의 전반사를 줄이고 광추출을 위해 습식 방법으로 hemisphere type의 ZnS를 제작하였다. 제작된 ZnS는 직경 200nm까지 성장하였으며, 이렇게 제작된 ZnS nano lens가 적용된 OLED device에서 휘도가 20% 이상 향상되는 것을 확인하였다.

• Information Display
• /
• v.7 no.3
• /
• pp.4-17
• /
• 2006

차세대 디스플레이로서, 특히 휴대기기를 위한 플레깃블 디스플레이에 대한 관심이 증가되고 있다. 지난 몇 년간 계속적으로 연구가 이루어져 왔음에도 불구하고, 플렉시블 디스플레이는 아직 하나의 '제품'으로서 시장에 진입하지 못하고 있다. 플렉시블 디스플레이는 플라스틱이나 메탈 호일, 플렉시블 유리와 같은 플렉시블 기판이 쓰이는데, 이것은 가벼우면서 얇고 강하며 제조 측면에서 높은 생산성을 가질뿐만 아니라 착용이 가능할 정도의 자유로운 디자인이 가능하다는 장점을 가지고 있다. 이러한 많은 장점으로 인해 플렉시블 디스플레이의 연구와 개발이 빠르게 진행되고 있다. 지난 몇 년 동안 개발된 전기영동(electrophoretic), 유기전계발광(OLED, organic light-emitting diode), 액정(liquid-crystal)과 관련된 플렉시블 디스플레이에 대해 성능 등을 알아보고, 플렉시블 디스플레이용으로 개발된 플라스틱 기판과 그 위에 형성된 유기박막트랜지스터(OTFTs, organic thin film transistors)의 특성을 분석한다. 그리고 oTFTs의 성능과 제작공정의 이해를 위해 self organized process에 대해 설명하고 마지막으로 중요 연구 과제를 제시한다.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.448-454
• /
• 2000

This paper describes the implementation of a multi-subject, multi-channel optical telemetry system for the short range measurement of electrocardiograms (EKGs) a system which receives command signals and transmits physiological signals to the external system using LED (Light Emitting Diode) and PD (Photodiode). This system decreases the dependency of power supply voltage to the CMOS IC chips and a new enforced synchronization technique using infrared bi-directional communication has also been proposed. The telemetry IC with the size of $5.1{\times}5.1mm^2$ has the following functions: receiving of command signal, initialization of internal state of all functional blocks, decoding of subject selection signal, time division multiplexing of 4-channel modulated physiological signals, transmission of modulated signals to external system, and auto power down control.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.479-480
• /
• 2006

The purpose of this paper is to investigate the relationship between CMP(Chemical Mechanical Polishing) characteristics of ITO thin film and friction signal by using the CMP monitoring system. Suba 400 pad and MSW2000 slurry of the Rohm & Haas Co. was used in this experiment to investigate the charateristics of ITO CMP. From this experiment, it is proven that the coefficient of friction is related to uniformity of the removal rate of the ITO thin film. Therefore, the prediction of polishing result would be possible by measuring friction signal.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.149-149
• /
• 2010

The origin of the inhomogeneous distribution of photoluminescence (PL) peak wavelength on a commercial 2" GaN wafer for green light emitting diode has been investigated by wide momentum transfer (Q) range x-ray diffraction (XRD) profile of InGaN/GaN multiple quantum wells. Near the GaN (0004) Bragg peak, wide-Q range XRD (${\Delta}Q$ > $1.4{\AA}-1$) was measured along the growth direction. Wide-Q XRD gives precise and direct information of ultra-thin InGaN quantum well structure. Based on the QW structural information, the variation of PL spectra can be explained by the combined effect of temperature gradient and slightly uneven flow of atomic sources during the QW growth. In narrow variations of indium composition and thickness of QW, an effective indium composition can be a good character to match structural data to PL spectra.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.560-560
• /
• 2012

We report a one-step fabrication method of Poly(9,9-dioctylfluorene) (PFO) nanowire array with pronounced ${\beta}$-Phase. We use liquid-bridge-mediated nanotransfer molding (LB-nTM) which is a new direct nano-patterning method based on the direct transfer of various materials from a mold to a substrate via liquid layer. The formation of the ${\beta}$-phase morphology in the resulting PFO nanowire array was evidenced by the presence of an absorption peak at 435nm. With the collection polarizer oriented parallel to the wire long axis, the PL emission was most intense and an emission dichroic ratio, DRE, of 3.7 was determined. The nanowire array have been investigated by scanning electron microscopy (SEM). Also, we simply fabricated structure of device of ITO/PFO nanowire arrays/Al and the electroluminescence spectra were recorded at various applied voltage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.279-279
• /
• 2011

본 연구는 LED 등기구에서 방열코팅소재에 따른 방열 효과를 연구하여 LED 등기구를 안정적으로 유지 제어 할 수 있는 방법을 찾고자 한다. 그에 따라 동일한 기구물에서 방열코팅만 변화하여 LED chip 온도의 Steady State 온도를 비교 측정하였다. 방열코팅은 동일한 알루미늄 Heat Sink에 일반분체코팅, Anodizing 처리, 알루미나 방열도료, Graphene이 섞인 알루미나도료, Graphene 잉크 등의 방열코팅소재를 아무 처리를 하지 않은 알루미늄 Heat Sink 와 비교 하였다. 온도는 LED chip, LED base plate, 코팅이 된 표면, 코팅 내부 2 mm 부분의 온도를 각각 Steady State가 될 때까지 측정하였다. 또한 LED의 power를 7 watt에서 13 watt 변화하면서 방열 원리를 분석하였다. 본 연구를 통하여 각 코팅소재에 따른 방열효과와 그 방열 원리를 연구 분석하였다.

• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.114-120
• /
• 2005

In this study, a biological reaction and measurement control system was developed to rapidly measure the insecticide imidacloprid residues in agricultural products. The biological reaction part of the system was designed to include micro-pumps and valves for fluid transport, and a polystyrene covet as a reaction chamber. The measurement control part of the system consisted of a photodiode with a light-emitting diode for optical density measurement, and a control microcomputer to implement assay. Signal output was read as the rate of change in optical density at 645 nm. The sensitivity of the system was 2.2 ng/mL ($IC_50$). The system could execute a measurement cycle in about 19 minutes. Research will be continued to develop an automatic sampler fur imidacloprid residues from agricultural products.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.367-370
• /
• 2015

Monolayer transition metal dicalcogenide (TMDC) materials are currently attracting extensive attention due to their distinctive electronic, transport, and optical properties. For example, monolayer $MoS_2$ exhibits a direct band gap in the visible frequency range, which makes it an attractive candidate for the photocatalytic water splitting. For the photoelectrochemical water splitting, the appropriate band edge positions that overlap with the water redox potential are necessary. Similarly, appropriate band level alignments will be crucial for the light emitting diode and photovoltaic applications utlizing heterojunctions between two TMDC materials. Carrying out first-principles calculations, we here investigate how the band edges of $MoS_2$ can be adjusted by surface ligand functionalization. This study will provide useful information for the realization of ligand-based band engineering of monolayer $MoS_2$ for various electronic, energy, and bio device applications.