• Korean Journal of Materials Research
• /
• v.27 no.12
• /
• pp.699-704
• /
• 2017

Recently, the use of an aluminum nitride(AlN) buffer layer has been actively studied for fabricating a high quality gallium nitride(GaN) template for high efficiency Light Emitting Diode(LED) production. We confirmed that AlN deposition after $N_2$ plasma treatment of the substrate has a positive influence on GaN epitaxial growth. In this study, $N_2$ plasma treatment was performed on a commercial patterned sapphire substrate by RF magnetron sputtering equipment. GaN was grown by metal organic chemical vapor deposition(MOCVD). The surface treated with $N_2$ plasma was analyzed by x-ray photoelectron spectroscopy(XPS) to determine the binding energy. The XPS results indicated the surface was changed from $Al_2O_3$ to AlN and AlON, and we confirmed that the thickness of the pretreated layer was about 1 nm using high resolution transmission electron microscopy(HR-TEM). The AlN buffer layer deposited on the grown pretreated layer had lower crystallinity than the as-treated PSS. Therefore, the surface $N_2$ plasma treatment on PSS resulted in a reduction in the crystallinity of the AlN buffer layer, which can improve the epitaxial growth quality of the GaN template.

• Macromolecular Research
• /
• v.16 no.4
• /
• pp.337-344
• /
• 2008

The following series of blue EL polymers was synthesized using the Suzuki polymerization method: poly(3',6'-bis(3,7-dimethyloctyloxy)-9,9'-spirobifluorene-2,7-diyl) poly[$(OC_{10})_2$-spirobifluorene], poly{3',6'-bis(3,7-dimethyloctyloxy)-9,9'-2,7-diyl-co-4-(3,7-dimethyloctyloxy) phenyl-diphenylamine-4',4'-diyl} poly[$(OC_{10})_2$-spirobifluorene-TPA] (5:1, 9:1) and poly{3',6'-bis(3,7-dimethyloctyloxy)-9,9'-spirobifluorene-2,7-diyl-co-4-(6-((3-methyloxetan-3-yl)methoxy)hexyloxyphenyl-bisphenylamine-4',4'-diyl) poly[$(OC_{10})_2$-spirobifluorene-TPA-oxetane]. The weight average molecular weight (Mw) and polydispersity of the resulting polymers ranged from $1.6{\times}10^4-1.5{\times}10^5$ and 1.77-2.31, respectively. The resulting polymers were completely soluble in common organic solvents and were easily spin-coated onto an indium tin oxide (ITO) substrate. The polymers exhibited strong blue emission peaking at 450 nm. The maximum brightness and luminance efficiency were $9,960\;cd/m^2$ and 1.2 cd/A, respectively.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.30 no.4
• /
• pp.62-74
• /
• 2017

Objectives : The purpose of this study is to investigate the effect of laser therapy for diabetic ulcer by using methods of systematic review. Methods : In this review, PubMed, Cochrane library, Web of Science, CNKI, CiNii, J-STAGE, NDSL and OASIS were used as the search engines. The search period is from the start date of the search engine to October 3, 2016. Randomized controlled trials(RCTs) using laser therapy for diabetic ulcer were searched and extracted by two independent researchers. Risk of bias(RoB) of Cochrane was used to assess methodological quality of studies. Results : Finally, five RCTs were selected. The follow-up period ranged from 15 days to 20 weeks. InGaAlP laser, GaAlAs laser and light emitting diode(LED) were used to treat diabetic ulcer. The clinical trials used sham laser irradiation or standard treatment as control in comparison to laser therapy. The endpoints included ulcer size, rate of healing and time to healing with follow-up period. The RCTs demonstrated therapeutic outcomes with no adverse effect. Most items of RoB were unclear and methodological quality was low. Conclusions : Our analysis suggests that laser therapy has therapeutic effects for diabetic ulcer. However, more systematic and stringent clinical trials will be required.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.1
• /
• pp.11-15
• /
• 2013

In order to find a sanitary logistic way to handle library books, papers and environmental sources contacting the books were tested in their microbial contamination load and methods to decontaminate the books were investigated. Generally bacterial load of inner book pages was very low, but increased when contaminated with liquid such as saliva. In contrast, their lateral ends showed much higher bacterial contamination presumably due to dry dust contamination on there. As operations to improve the sanitary book conditions, turbulent air blow was found to be workable for reducing dry dusty contamination and 280 nm ultra-violet (UV) light emitting diode (LED) was so for decontaminating wet surface contamination. Microbial inactivation by the UV LED could be realized with irradiation for more than 5 minutes at 2 cm distance. Air blow of 5.5 m/s for 0.5~1 minute could reduce the dusty contamination on a model book surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.124-124
• /
• 2010

Much interest has been focused on InGaN-based materials and their quantum structures due to their optoelectronics applications such as light emitting diode (LED) and photovoltaic devices, because of its high thermal conductivity, high optical efficiency, and direct wide band gap, in spite of their high density of threading dislocations. Build-in internal field-induced quantum-confined Stark effect in InGaN/GaN quantum well LED structures results in a spatial separation of electrons and holes, which leads to a reduction of radiative recombination rate. Therefore, many growth techniques have been developed by utilizing lateral over-growth mode or by inserting additional layers such as patterned layer and superlattices for reducing threading dislocations and internal fields. In this work, we investigated various characteristics of InGaN multiple quantum wells (MQWs) LED structures grown on selectively wet-etched porous (SWEP) GaN template layer and compared with those grown on non-porous GaN template layer over c-plane sapphire substrates. From the surface morphology measured by atomic force microscope, high resolution X-ray diffraction analysis, low temperature photoluminescence (PL) and PL excitation measurements, good structural and optical properties were observed on both LED structures. However, InGaN MQWs LED structures grown on SWEP GaN template layer show relatively low In composition, thin well width, and blue shift of PL spectra on MQW emission. These results were explained by rough surface of template layer, reduction of residual compressive stress, and less piezoelectric field on MQWs by utilizing SWEP GaN template layer. Better electrical properties were also observed for InGaN MQWs on SWEP GaN template layer, specially at reverse operating condition for I-V measurements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.182.1-182.1
• /
• 2013

Silver (Ag)는 높은 반사율을 가지고 있어 Top-Emission Organic Light Emitting Diode (T-OLED)의 반사전극으로 사용하기 적합하지만 일함수가 낮은 단점 (4.3 eV)을 가지고 있다. 이런 낮은 일함수를 증가시키기 위하여 Ag 박막 표면을 산화시켜 일함수를 증가시키기 위한 연구가 진행중에 있으며, 이 연구에서는 UV로 $O_3$을 발생시켜 Ag 박막 표면을 산화시키기 위한 연구를 진행하였다. 특히, Ag 박막 표면의 일함수 변화를 측정하기 위하여 SPM (Scanning Probe Microscopy)의 KPFM (Kelvin Probe Force Microscopy) mode를 적용하여 nano 영역에서의 일함수 변화를 surface potential로 측정하여 UV 표면 산화에 의한 표면 일함수 형상을 확인하였다. Ag 박막은 rf magnetron sputter를 사용하여, Si 기판위에 300nm 두께로 증착시켰다. 이후 $O_3$ 발생되는 UV 램프로 Ag 박막 표면 30초 간격으로 최대 5분간 산화시켰으며, 이후 KPFM mode를 사용하여 산화 시간에 따른 Ag 박막 표면의 potential 변화를 측정하였다. 0~3분간 산화된 Ag 박막 표면의 potential은 약 6 mV로 일정하였으나 3분 이후 최대 110 mV까지 급격하게 변화하는 것을 확인할 수 있었다. Ag 박막 표면의 RMS roughness는 UV 산화처리 전0.7 nm였으나, potential이 급격하게 증가하는 시점인 3분 이후 2.83 nm로 약 400% 이상 증가하였다. 이를 통해 $O_3$ 발생 UV 램프로 산화된 Ag 박막의 표면 물성은 처리 시간에 따라 급격히 변하는 것을 확인하였다.

• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.71-77
• /
• 2012

We studied the effect of heat treatment on the microstructures and mechanical strength of the solder joints in the Light Emitting Diode (LED) packages. The commercial LED packages were mounted on the a flame resistance-4 (FR4) Printed Circuit Board (PCB) in the reflow process, and then the joints were aged at $125^{\circ}C$ for 100, 200, 300, 500 and 1000 hours, respectively. After the heat treatment, we measured the shear strength of the solder joints between the PCB and the LED packages to evaluate their mechanical property. We used Pb-free Sn-3.0Ag-0.5Cu solder to bond between the LED packages and the PCBs using two different surface finishes, Electroless Nickel-Immersion Gold (ENIG) and Electroless Nickel-Electroless Palladium-Immersion Gold (ENEPIG). The microstructure of the solder joints was observed by a scanning electron microscope (SEM). (Cu,Ni)6Sn5 intermetallic compounds (IMCs) formed between the solder and the PCB, and the thickness of the IMCs was increased with increasing aging time. The shear strength for the ENIG finished LED package increased until aging for 300 h and then decreased with increasing aging time. On the other hand, in the case of an ENEPIG finished LED package, the shear strength decreased after aging for 500 h.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.102-107
• /
• 2014

In this paper the spectra of correlated color temperature (CCT) tunable white light-emitting diode (LED) luminaires, consisting of commercial red, green, blue, and amber LED chips, were optimized to increase color rendering index (CRI), and a special CRI of R9 for deep red color was obtained. To improve the design's accuracy, measured LED spectra were used instead of mathematically modeled ones. Real CCT tunable LED luminaires with CRIs of 87-90 and R9s of 34-93 were fabricated and demonstrated at CCTs of 3000-6000 K.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.3
• /
• pp.185-192
• /
• 2021

Purpose : Our study aimed to compare the effectiveness of low-level laser therapy (LLLT) and light-emitting diode therapy (LEDT) for chronic pain intensity reduction and body temperature increase in older adults with chronic pain. Methods : Overall, 144 of 332 participants' records were used in this retrospective chart review. The study was conducted at a private health center in Busan city and the integrative medical center of a tertiary care hospital in Daegu city, South Korea. Patients experiencing chronic pain for over 6 months were assigned to either the LLLT or LEDT group. Both groups underwent 16 sessions of phototherapy held twice a week for 8 weeks, with each session lasting 60 minutes. The primary outcomes for both groups were the mean visual analogue scale (VAS) scores and body temperatures in both groups. The secondary outcome was the correlation between changes in body temperature and pain intensity. Measurements were recorded at the baseline and at each follow-up session. Results : A decrease in pain intensity and an increase in body temperature (p<.001) were observed in both groups. There was a significant difference in the VAS scores and temperature changes between the groups (p<.001). Odditionally, there were significant differences in the patterns of change in the VAS score and body temperature between the groups as the sessions progressed (p<.01), and a strong inverse correlation between body temperature and pain intensity changes were observed (p<.01). Conclusion : The use of photobiomodulation therapy at a specific wavelength may improve pain severity and simultaneously increase the body temperature among elderly people with chronic pain.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.4
• /
• pp.211-220
• /
• 2021

Low-pressure sodium lamps, high-pressure sodium lamps, and fluorescent lamps are mainly used for tunnel lighting in Rep. of Korea, which accounts for the highest percentage in the tunnel maintenance costs. Therefore, tunnel lights are being replaced by LED lamp that have advantages with respect to low power consumption and sustainability. To analyze the effect of replacement high pressure sodium lamp with LED lamp, illumination and monthly power usage per year have been investigated for 10 tunnels. The usage of LED lamp results in illumination improvement from 27.9% to 490% and power saving around average 47.1%.