• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.347-348
• /
• 2006

This paper performed the basic study for developing the Photodynamic Therapy Equipment for medical treatment. The equipment have been manufactured by using the High Bright Light Emitting Diode and TLC5941 integrated circuit. As a result, 630nm Light Emitting Diode Module was made for the optimization of irradiation condition. And we confirmed the current change according to increase of the level of Light Emitting Diode Module.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권2호
• /
• pp.131-148
• /
• 2009

An organic light emitting diode (OLED), also light emitting polymer (LEP) and organic electro luminescence (OEL), is any light emitting diode (LED) whose emissive electroluminescent layer is composed of a film of organic compounds. The layer usually contains a polymer substance that allows suitable organic compounds to be deposited. They are deposited in rows and columns onto a flat carrier by a simple "printing" process. The resulting matrix of pixels can emit light of different colors. Such systems can be used in television screens, computer displays, small, portable system screens such as cell phones and PDAs, advertising, information and indication. OLEDs can also be used in light sources for general space illumination, and large-area light-emitting elements. In this paper, we develop the general guide line of the accelerated life test for assuring B10 life of AMOLED(Active Matrix Organic Light Emitting Diode) and PMOLED(Passive Matrix Organic Light Emitting Diode) which are widely used for display monitor less than 115 mm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.165-167
• /
• 2007

The performance of polymer light emitting diode can be improved significantly by interfacial engineering on anode and/or cathode through adjusting the charge injection barriers for holes and electrons. Studies involve CFx and SAM modifications on ITO, thickness and delay time to baking of PEDOT:PSS, and electron injection/hole blocking layer.

• KSBB Journal
• /
• 제27권4호
• /
• pp.263-267
• /
• 2012

The purpose of this study was to determine optimum value of aeration rate for the cultivation of Chlorella sp. under illumination of red light emitting diode. The aeration rates varied from 0 to 2.4 vvm under the illumination of 4,400 lux of red light emitting diode. The highest specific growth rate of $1.51\;day^{-1}$ was obtained at the aeration of 0.7 vvm and lower specific growth rates were obtained for other aeration tests. Furthermore, the highest biomass concentration (1.02 g/L) was also obtained at the aeration of 0.7 vvm. Therefore, aeration of 0.7 vvm was determined to be the optimum aeration rate for the cultivation of Chlorella sp. under red light emitting diode.

• 대한의용생체공학회:의공학회지
• /
• 제35권5호
• /
• pp.125-131
• /
• 2014

The purpose of this study is to verify the utility of reflected photoplethysmography sensor using two green light emitting diodes that influenced by ambient light. Recently it has been studied that green light emitting diode is suitable for light source of reflected photoplethysmography sensor at low temperature and high temperature. Another study showed that, green light is better for monitoring heart rate during motion than led light. However, it has a bad characteristic about ambient light noise. To verify the utility of reflected photoplethysmography sensor using green light emitting diode, this study measures the photoplethysmography signal that is distorted by ambient light and will propose a solution. This study has two parts of research method. One is measurement system that composed sensor and board. The sensor is made up PE-foam and Non-woven fabric for flexible sensor. The photoplethysmography signal is measured by measurement board that composed high-pass filter, low-pass filter and amplifier. Ambient light source is light bulb and white light emitting diode that has three steps brightness. Photoplethysmography signal is measured with lead II electrocardiography signal at the same time and it is measured at the finger and radial artery for 1 minute, 1000 Hz sampling rate. The lead II electrocardiography signal is a standard signal for heart rate and photoplethysmography signal that measured at the finger is a standard signal for waveform. The test is repeated 3 times using three sensor. The data is processed by MATLAB to verify the utility by comparing the correlation coefficient score and heart rate. The photoplethysmography sensor using two green light emitting diodes is shown better utility than using one green light emitting diode and red light emitting diode at the ambient light. The waveform and heart rate that measured by two green light emitting diodes are more identical than others. The amount of electricity used is less than red light emitting diode and error peak detectability factor is the lowest.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.712-713
• /
• 2017

발광 다이오드는 임상용으로 사용되는 레이저에 비해서 발생하는 열이 적고, 일반 건강한 세포에 무해하며, 비침습적인 특성으로 높은 안전성을 가지고 있으며 현재 많은 연구가 진행되고 있다. 따라서 본 논문에서는 복수의 파장대역을 갖는 발광 다이오드를 이용하여 사람의 자궁경부암 조직의 증식억제 주파수효과를 확인하였다. 준비된 자궁경부암 세포를 다양한 파장대의 발광 다이오드에 일정한 시간동안 조사한 후 세포의 활성도를 측정하였고, 그 결과 비교적 파장이 긴 빨강과 초록색의 노출보다 파장이 짧은 파란색 빛이 자궁경부암 세포의 증식억제 효과가 있음을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.648-650
• /
• 2007

We demonstrate highly efficient White Polymer Electrophosphorescent Light-emitting Diode using newly developed green and red light emitting heteroleptic iridium complex, Ir-(pq)2tpy, and blue light emitting fluorescent dopant, BczVBi. The best luminous efficiency reached 28cd/A with maximum luminance of 87000cd/m2. The scheme for determining optimum device architecture and dopant concentrations were constructed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1559-1560
• /
• 2007

BGR mixture phosphor pumped by 400 nm is developed for white-light-emitting diode of liquid crystal display backlight. White-emitting phosphor is prepared by mixing $Ba_2SiO_4:Eu^{2+}$ and $(Ba,Sr)_3MgSi_2O_8:Eu^{2+},Mn^{2+}$ phosphors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1082-1085
• /
• 2003

본 연구에서는 고분자를 사용하여 만든 유기EL소자인 PLED (Polymer Light Emitting Diode)의 제조공정 변화에 따른 소자성능을 연구하였다. PLED의 제작은 크게 ITO 기판 제작, 발광층 및 전극 증착 등의 공정으로 나누어진다. ITO 기판은 사진식각공정으로, 발광층의 증착은 스핀코팅법으로, 전극은 진공증착법으로 각각 제작하였다. 코팅 시 스핀속도 및 점도 조절을 통하여 발광층의 두께를 조절하였고, 스핀코팅 후 건조방법에 따라서 표면의 uniformity와 발광특성을 비교해 보았다. 실험결과 특정 두께에서 발광특성이 우수하게 나타나는 것을 확인할 수 있었다. 그리고 건조방법에 따라 발광층의 표면 uniformity에 차이가 있었으며, 표면 uniformity에 따라 diode의 I-V 특성 경향이 달리 나타났다.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.274-277
• /
• 2016

녹색 발광다이오드의 다양자우물층과 전자막이층 사이에 p형 중간층 삽입이 소자의 특성에 미치는 영향이 소자 시뮬레이션을 통하여 연구되었다. 중간층의 Mg 도핑 깊이에 따른 발광다이오드의 전류-전압, 발광파장, 누설전류, 광효율 특성이 분석되었으며 최적의 발광 특성을 나타내는 소자 구조가 제시되었다. 중간층 전 영역이 p형으로 도핑된 구조와 30 nm까지 도핑된 구조는 누설전류 억제를 통하여 녹색 발광다이오드의 가장 큰 문제점 중에 하나인 효율 드룹 현상을 효과적으로 완화하였다. 특히, 30 nm까지 도핑된 구조는 전류-전압 및 발광 특성에 있어서 가장 향상된 결과를 보였다.