• 제목/요약/키워드: Light-duty truck

검색결과 14건 처리시간 0.018초

4지 신호교차로 차종별 사고모형 -청주시를 사례로- (Accident Models of 4-Legged Signalized Intersections by Vehicle Type in the Case of Cheongju)

  • 박병호;박길수;인병철
    • 한국도로학회논문집
    • /
    • 제10권4호
    • /
    • pp.161-170
    • /
    • 2008
  • 본 연구는 차종별 사고모형을 다루고 있다. 연구의 목적은 청주시 143개 4지 신호교차로에서 발생한 차종별 사고모형을 개발하는 것이다. 이를 위해 이 연구는 EPDO(대물피해환산법)와 교통 및 기하구조 요인과의 관계를 설명하는데 중점을 두고 있다. 분석된 주요결과는 다음과 같다. 첫째, 신뢰수준 90% 이내에서 통계적으로 유의한 6개의 음이항 회귀모형이 개발되었다. 둘째, 모형의 ${\rho}^2$값은 0.14307(승용차), 0.35556(대형승합차), 0.21684(소형승합차), 0.205152(이륜차), 0.32338(소형트럭), 0.29046(대형트럭)으로, 이는 모두 통계적으로 의미있는 것으로 분석된다. 마지막으로 모든 모형의 공통된 사고요인은 ADT(일평균교통량)이며, 승용차의 특정 사고요인으로는 주도로차로폭합, 대형승합차의 경우 평균황색시간, 그리고 소형승합차의 경우 주도로와 부도로의 차로수 차이로 분석되었다.

  • PDF

차량인증모드와 실도로 주행모드별 국내 경유 소형화물 자동차의 온실가스 배출특성 분석 (A Study of Greenhouse Gas Emission Rates from LDTs according to Emission Certification Modes and Real-World Vehicle Driving Cycles in Korea)

  • 김지영;서충열;손지환;박준홍;문태영;이상은;김정수
    • 한국기후변화학회지
    • /
    • 제3권4호
    • /
    • pp.235-243
    • /
    • 2012
  • 자동차 분야는 온실가스 배출량의 상당 부분을 차지하는 주요 배출원으로써, 우리나라는 온실가스 저감을 위하여 2020년까지 교통부문에서는 BAU 대비 34.3%를 감축하는 것을 목표로 하고 있다. 이러한 목표달성을 위하여 2012년부터 자동차 온실가스 배출기준을 적용하고 있으며, 차기 온실가스 배출기준을 마련하는데 있어 소형 화물차량에 대한 대상차종 포함 여부가 검토되고 있다. 이에 본 연구에서는 경유 소형화물 자동차를 대상으로 주행모드에 따른 온실가스 배출특성을 분석하였다. 차속모드인 NIER 모드를 이용하여 분석한 결과, 자동차 온실가스 배출량은 차속이 증가할수록 감소하는 반비례 경향을 나타내었으며, $CO_2$의 경우 일정차속(65.4 km/h) 이상의 고속구간에서는 배출량이 증가하였다. 자동차 주행거리에 따른 온실가스 배출량 증가는 나타나지 않았으며, 각국의 온실가스 배출량 측정모드를 적용한 결과, 유럽에서 적용하고 있는 NEDC 모드에서 가장 높게 나타났다. 또한, 복합모드 시험 시 $CO_2$ 배출이 CVS-75 모드에 비하여 8% NEDC 모드에 비하여 14% 적게 나타났다.

배출허용기준 강화에 따른 차속별 경유 중형트럭의 유해대기오염물질 배출특성 (Speed-dependent Emission Characteristics of the Hazardous Air Pollutants from Diesel Medium-duty Trucks according to Emission Standards)

  • 홍희경;정성운;손지환;문태영;이상은;문선희;윤현진;김정수;김정화
    • 한국분무공학회지
    • /
    • 제20권2호
    • /
    • pp.121-129
    • /
    • 2015
  • This study was designed to investigate the emission characteristics of unregulated pollutants (Aldehyde, VOCs, PAHs) as well as regulated pollutants (CO, HC, NOx and PM) from diesel medium-duty trucks. The emission characteristics of unregulated and regulated pollutants were assessed based on regulation standards (EURO 4 and EURO 5) and intake weight (2.5 ton and 5 ton). The results show that unregulated and regulated pollutants remained almost unchanged at higher speeds but decreased at below 23.5 km/h. Reduction in unregulated and regulated pollutants was noticeable in vehicles of recent regulation standards and light intake weight. The analysis of aldehyde using UPLC showed that formaldehyde and acetaldehyde of aldehyde were most dominant. The GC/MS analysis showed that benzene, toluene, ethylbenzene and xylene of VOCs was over 80% followed by toluene, xylene, ethylbenzene and benzene. In addition, the analysis of PAHs using GC/TOF-MS indicated that bi- and tricyclic aromatic ring of aromatic compounds was 73% and 53% at 2.5 ton and 5 ton vehicles, respectively. The results of this study will be contributed to establish HAPs inventory.

Euro-5 대응 디젤엔진용 EGR 쿨러의 열교환 효율 연구 (A Study on Heat Exchange Efficiency of EGR Cooler for Diesel Engine to Meet Euro-5 Emission Regulation)

  • 이준;한창석
    • 한국자동차공학회논문집
    • /
    • 제15권3호
    • /
    • pp.183-188
    • /
    • 2007
  • Recently, diesel engine has been frequently applied to RV, SUV and light duty truck due to the good fuel economy and high thermal efficiency. $NO_x$ and PM, environmental pollution materials are basically produced in diesel combustion process. The most important target in diesel engine research is the development of system to reduce the emissions of $NO_x$ and PM. Cooled EGR system is an effective method for the reduction of $NO_x$ emission and PM emission from a diesel engine and EGR cooler is the key component of the system. This study investigates the EGR cooler of oval gas tubes compared with the EGR cooler of shell & tubes to verify the heat exchange efficiency of cooler by means of engine dynamometer tests, rig performance tests and numerical analyses.