• Plant Resources
• /
• v.7 no.1
• /
• pp.77-86
• /
• 2004

The reduced ratio of red:far-red (R:FR) light acts as a measure of the proximity of competitors and plants can detect the potentially competing neighbor plants by perceiving reflected R:FR signals and initiate the response of “shade avoidance” before actual shading occurs. The phytochrome system is responsible for monitoring the changes in the R:FR and initiating the shade avoidance response. The response to low R:FR ratio was studied in a white aspen Populus alba clone ‘Bolleana’ using two filter systems: a clear plastic filter system that allows a R:FR ratio less than 1.0 to pass from adjacent border plant reflection; and a special commercial plastic that blocks FR light and creates a R:FR ratio above 3.0. The reduced R:FR signals enhanced the stem elongation in response to competition at the expense of relative stem diameter growth. Trees grown inside clear chambers were 27 ％ taller than trees grown inside the FR-blocking filter chambers. Stem taper of clear chamber trees was 16％ less than the FR-blocking filter trees. Low R:FR also induced 22％ more stem dry weight and 13％ greater petiole length per leaf compared to the FR-blocking filter trees. There were no statistically significant differences in leaf area, leaf number increment, and total dry weight between the two light filter treatments.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.34-39
• /
• 2018

The biggest topics in the automobile industry are light weightening and fuel efficiency improvement. There's a lot of research going on. It is focused on light weight materials. Light weight material is seen as the best way to reduce fuel consumption and to solve the problem of environmental pollution and resource depletion. For the light weight materials, new materials such as aluminum, magnesium, and carbon-hardening materials can be found. Research on the joining techniques of dual materials, improvement of material properties by improving the method of manufacture of existing materials, and studies on ultra-high strength steel sheets are expected to take up the most weight in lightweight materials. As the strength of the ultra-high strength steel sheets increases during forming, it is difficult to obtain dimensional precision due to the increase in elastic restoring force compared to mild or high strength steel sheets. Spring back is known to be affected by a number of factors due to poor plastic molding, and can be divided into the effects of the material spraying and the process. The study on the plasticitic variables were studied as plasticitic factors that can be controlled by a part company. Tensile testing of ultra-high strength materials was conducted to derive properties for plasticitic analysis and to analyze spring back with two factors controlling the height of the bead and blank holding force by adding tensile force and controlling the flow rate.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.2
• /
• pp.154-159
• /
• 2014

This study was carried out in order to investigate the early growth and root development characteristics of Atractylodes japonica container seedling. Experiment was performed by light intensity (100%, 60%, 25% and 10% of full sunlight). Height was surveyed well under 25% of full sunlight (overall 11.013.0%). Root collar diameter was the highest in the full sunlight (7.52 mm). It was the highest fresh weight (1.52 g, 0.92 g, 0.90 g and 3.34 g) under 25% of full sunlight, root dry weight was getting higher in the higher light level and the highest in the full sunlight (0.13 g). Total root length, root project area, root surface area and root volume were the highest under 25% of full sunlight (434.7 cm, $17.4cm^2$, $54.7cm^2$, $0.55cm^3$, respectively) and the lowest under 10% of full sunlight. As a result of surveying the whole experiment, A. japonica is judged nicely by maintaining 25% of full sunlight, excepting 10% of full sunlight. And light levels during the early growth are overly important to improve early growth.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.8-13
• /
• 2011

High Strength Concrete (HSC) has a disadvantage of the brittle failure under fire due to the spalling. The studies on spalling control method of new constructed HSC buildings were performed enough, but the studies on existing buildings are insufficient. The new inorganic refractory mortar is developed in this study. The insulating capacity is enhanced by using light weight fine aggregate and polypropylene (PP) fiber. In results of material test, the thermal conductivity of light weight fine aggregate get lower than general fine aggregate. And in results of column test, the fire resisting time is delayed 20 minutes by using light weight fine aggregate, 10 minutes by increasing finishing depth from 10 mm to 20 mm and 4 minutes by using 0.6 % PP fiber.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.2
• /
• pp.109-116
• /
• 2007

The purpose of this paper is to evaluate the fire resistant performances of load-bearing wall using both composite and steel stud panel infilled with light-weight formed mortar under axial loading according to KS F 2257(1999). The minimum requirement of 2 hours fire resistant rating is needed for the residential and commercial buildings under the fire regulation of Korea. From test results, it is found that two types of specimen composed of the hybrid stud and steel stud panel filled with light-weight formed mortar fited in with the requirement of 2 hours fire resisting rate for the load-bearing wall. In the conclusions, the specimen with hybrid stud shows predominating fire-resistant performance on the adiabatic effects rather than that of the steel stud specimen.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.763-787
• /
• 2017

A graph is called 1-planar if it can be drawn in the Euclidean plane ${\mathbb{R}}^2$ such that each edge is crossed by at most one other edge. The weight of an edge is the sum of degrees of two ends. It is known that every planar graph of minimum degree ${\delta}{\geq}3$ has an edge with weight at most 13. In the present paper, we show the existence of edges with weight at most 25 in 3-connected 1-planar graphs.

• International Journal of Railway
• /
• v.2 no.3
• /
• pp.124-126
• /
• 2009

Energy savings can be achieved with optimum energy consumptions, brake energy regeneration, efficient energy storage (onboard, line side), and primarily with light weight vehicles. Over the last few years, the rolling stock industry has experienced a marked increase in eco-awareness and needs for lower life cycle energy consumption costs. For rolling stock vehicle designers and engineers, weight has always been a critical design parameter. It is often specified directly or indirectly as contractual requirements. These requirements are usually expressed in terms of specified axle load limits, braking deceleration levels and/or demands for optimum energy consumptions. The contractual requirements for lower weights are becoming increasingly more stringent. Light weight vehicles with optimized strength to weight ratios are achievable through proven design processes. The primary driving processes consist of: $\bullet$ material selection to best contribute to the intended functionality and performance $\bullet$ design and design optimization to secure the intended functionality and performance $\bullet$ weight control processes to deliver the intended functionality and performance Aluminium has become the material of choice for modern light weight bodyshells. Steel sub-structures and in particular high strength steels are also used where high strength - high elongation characteristics out way the use of aluminium. With the improved characteristics and responses of composites against tire and smoke, small and large composite materials made components are also found in greater quantities in today's railway vehicles. Full scale hybrid composite rolling stock vehicles are being developed and tested. While an "overdesigned" bodyshell may be deemed as acceptable from a structural point of view, it can, in reality, be a weight saving missed opportunity. The conventional pass/fail structural criteria and existing passenger payload definitions promote conservative designs but they do not necessarily imply optimum lightweight designs. The weight to strength design optimization should be a fundamental design driving factor rather than a feeble post design activity. It should be more than a belated attempt to mitigate against contractual weight penalties. The weight control process must be rigorous, responsible, with achievable goals and above all must be integral to the design process. It should not be a mere tabulation of weights for the sole-purpose of predicting the axle loads and wheel balances compliance. The present paper explores and discusses the topics quoted above with a view to strengthen the recommendations and needs for the weight optimization by design approach as a pro-active design activity for the rolling stock industry at large.

• Korean Journal of Poultry Science
• /
• v.24 no.2
• /
• pp.85-90
• /
• 1997

An experiment was conducted to investigate the relationship between blood hormone levels and light cycle on performance of Korean native chicken. One hundred and two Korean native chickens were grouped into three treatments of natural light cycle (Control), 13L:11D (T2), and 16L:8D (T3). The egg production, egg weight, feed intake, serum melatonin and estrogen level were periodically measured from 22 to 34 weeks, respectively. The laying rates of T2 and T3 were significantly higher than that of the Control (P

• Microbiology and Biotechnology Letters
• /
• v.25 no.4
• /
• pp.339-345
• /
• 1997

Under the light intensity of 25-72$\mu$E/ m$^{2}$/s Botryococcus braunii UTEX 572 grew faster than Botryococcus sp. GE 24 isolated from a freshwater lake. The specific growth rate ($\mu$) of B. braunii UTEX 572 was highest at 0.260 (1/day) on a dry weight basis in Chu 13 medium from 1 to 9 days of incubation and then continuously decreased. Carbohydrate concentration and cellular nitrogen and phosphorus contents of B. braunii UTEX 572 gradually decreased with light intensity over a range of 25-72$\mu$E/m$^{2}$2/s, whereas the concentrations of protein and cellular N:P ratio increased with light intensity. Chlorophyll-a concentration showed a decreasing tendency with light intensity. The dry weight of B. braunii UTEX 572 increased in the highest rate of 83 mg/l/day at pH 8.0. When the N: P ratio of Chu 13 medium was adjusted to 50: 1 by addition of nitrogen source, dry weight increasing rate was 115 mg/l/day between 20 and 28 days of incubation which was the highest value during the cultivation. Cell growth in an open culture of B. braunii UTEX 572 was highest with Chu 13 medium, whereas that with Chu 13 medium adjusted to pH 7.0, containing 250 mg/l penicillin, or containing 1% glucose was reduced on a large scale. However, this result shows the possibility of the mass cultivation of B. braunii UTEX 572 in an open system competing with other microorganisms.

• Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.51-56
• /
• 2015

A 8-week trial was conducted to evaluate the effects of photoperiod manipulation on the growth performance and hematological parameters of juvenile Caspian roach, Rutilus rutilus caspicus (average weight $1.46{\pm}0.12g$ mean${\pm}$SD) reared under five photoperiods (24 h Light, 24L; 18 h Light & 6 h Dark, 18L:6D; 12 h Light & 12 h Dark, 12L:12D; 6 h Light & 18 h Dark, 6L:18D; 24 h Dark, 24D) with constant light intensity 1,500 lx on the water surface. Triplicate of 20 fish were allocated into each of 15 fiberglass tanks of 50 L capacity and they were fed three times per day with the commercial feed (SFK, Co., Sari - Iran) contains 50.0% protein and 10.5% lipid. At the end of experimental period, final body weight, weight gain and specific growth rates of fish exposed to 24L were significantly higher than those of fish exposed to 12L:12D, 6L:18D and 24D (P < 0.05). Red blood cell and hemoglobin of fish exposed to 24L were significantly higher than those of fish exposed to 24D. No significant difference observed in hematocrit, white blood cell and plasma glucose among the different treatments groups. Therefore, these results demonstrated that the growth performance of juvenile Caspian roach can be significantly stimulated by using 24L and 18L:6D photoperiods without any measurable significant stress response such as plasma glucose concentration.