• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.27-33
• /
• 2014

There are several methods to improve the flight efficiency of HALE(High Altitude Long Endurance) UAV(Unmaned Aerial Vehicle). Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. In order to reduce the weight of airframe structures, new concepts which are different from traditional airframe structure design such as the mylar wing skin should be introduced. The spar is the most important component in a mylar skin wing structure, so the spar weight reduction is the key point for reduction of the wing structural weight. In this study, design trade-off study for the front spar of the HALE UAV wing is conducted in order to reduce the weight. Design and analysis procedure of high aspect ratio wing spar are introduced. Several front spar structures are designed and trade-off study regarding the weight and strength for the each spar are performed. Spar design configurations are verified by the static strength test. Finally, optimal front spar design is decided and applied to the HALE UAV wing design.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.99-100
• /
• 2012

Aggregate thermal properties and cooling methods are most important to evaluate the residual mechanical properties of concrete. In this study, we evaluate the residual mechanical properties of concrete according to the aggregate type and cooling method. We use the normal weight aggregate and light weight aggregate which have different thermal properties. After heating to the target temperature, we evaluate the mechanical properties according to the slow and fast cooling condition. As a result, normal weight aggregate concrete has higher effectiveness of cooling conditions than light weight aggregate concrete.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.135-142
• /
• 1997

For lighting of dark and hazardous workplaces such as compartments of ships under construction, workers should use hand lamps of explosion-proof type. However, the heavy weight of such lamps has prevented most impatient workers from using such types of lamps extensively. In this paper, ire developed a light weight hand lamp of intrinsic safety type which reduced the weight a lot while maintaining or improving the lighting and explosion-proof function. We made a Prototype which consisted of lamp fixture and low/high frequency power supply. Testing results show that the hand lamp meets well all the explosion-proof testing requirements of the Korea Industrial Safety Corporation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.3
• /
• pp.57-62
• /
• 1998

This study is intended to analyze how formations affect the tensile and tear strengths of paper at the same basis weight. Light transmitance method using a scanner was employed to measure the degree of formation in terms of gray scale. Scanning method showed close relationship between gray scale value and basis weight. At the same basis weight a sheet of paper with good formation had higher tensile strength in terms of breaking length than that of a paper with poor formation. There was little difference in tear strength depending on formations.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.751-756
• /
• 2018

A study on the weight reduction of a motor shaft in electric vehicle by using optimum design technique was carried out. The structural analysis of a motor shaft was performed by using ANSYS to investigate the structural safety. We also used HEEDS to find the optimal hollow shaft thickness. When the material of the hollow shaft is changed to SCM822H by using ANSYS 14.5 and HEEDS MDO, the weight could be reduced by about 53 % compared to the conventional solid one. From this study, the optimized dimensions of a hollow shaft were determined for light weight design.

• Journal of Korean Society of Forest Science
• /
• v.73 no.1
• /
• pp.43-54
• /
• 1986

This study was carried out to investigate the influence of light intensity on the growth of Korean white pine (Pinus koraiensis) seedlings. The seedlings were grown under four different relative light intensities: 100%, 63%, 37%, and 19% of full sunlight by covering with saran screen on seed bed. The results obtained were summarized as follows; 1. The highest shoot elongation was found at 37% in relative light intensity (RLI) plot, and the best growth in root, seedling length and diameter increment appeared at 100% on RLI plot. Contribution rates of shading to growth in shoot elongation, root growth, seedling length, and diameter increment were 9.3%, 26.2%, 21.0%, and 48.7%, respectively. 2. The greatest number of one-year-old needle fascicle was found at 100% in RLI plot, whereas that of two-year-old needle fascicle appeared at 37% in RLI plot. The contribution rate of the light intensity to number of needle fascicle was 3.9% and factor of leaf age contributed to number of needle fascicle in 27.8%. The length of needles grown under different light intensities varied with needle ages. The longest length of new needles appeared at 37% in RLI plot, but old needles were not clear in influence of light intensity. The contribution rate to needle length by the light intensity was 2.5%. 3. The heaviest value of the fresh and dry weight of seedlings appeared at 100% of RLI plot then decreased with light intensity. The contribution rates to fresh and dry weight by the shading were 38% and 7.6% respectively. 4. The largest value of the dry weight of needles appeared at 100% of RLI plot and then decreased with light intensity. The contribution rates to dry weight of needles by the light intensity was 13.18%. 5. The values of T/R ratio increased with decreased light intensity and the contribution rate was 7.0%. 6. Positive correlation and linear regressions were recognized between dry weight of leaf and other factors (dry weight of shoot, root, seedling and diameter increment).

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.358-363
• /
• 2014

BACKGROUND: Many strawberry growers are utilizing daylength extension by using incandescent bulb or fluorescent lamp to break dormancy of strawberry induced by low temperature and short day conditions. Conventional incandescent bulb and fluorescent lamp consume a lot of electricity and have short longevity. Red light known for most efficient wavelength for daylength extension light of short-day plant and long-day plant. This study was conducted to verify the effects of red light to enhance growth and to increase production of strawberry (Fragaria ${\times}$ ananassa Duch. cvs. "Seolhyang") METHODS AND RESULTS: Three red light (660nm) of 0.70, 0.87, and $1.05{\mu}mol/m^2/s$ (PAR) and conventional incandescent bulb of 40 Lux were treated respectively under the pot experiment. All treatment irradiated from 18:00 to 24:00 for 6 hours. Red light treatment tend to increase leaf stem number, flower stem number, weight of flower stem, crown weight, root weight, and leaf area of strawberry then incandescent bulb treatment. In field experiment, red light of $0.7{\mu}mol/m^2/s$ (PAR) and conventional incandescent bulb of 40 Lux were irradiated respectively. Field experiment showed that the leaf number, leaf weight, and crown weight of strawberry increased than those of incandescent bulb control with red LED of $0.7{\mu}mol/m^2/s$ (PAR). Red LED treatment increased the fruit number over 15g than incandescent bulb. Furthermore, red LED treatment decreased fruit number below 15g of strawberry than incandescent bulb treatment. Therefore, We believed that red LED treatment increased marketable fruit number by increment of weight of each fruit. Consequently, marketable fruit number, fruit weight, and fruit production of strawberry were increased than those of incandescent bulb by 5 %, 2.9 %, and 8.5 % respectively, but not showed significantly differences. CONCLUSION: These results presumably due to directly enhanced photosynthesis of strawberry leaves and activated action of Pfr phytochrome form by red light. In conclusion, red LED of 660nm could be used for daylength extension light source to enhance production of strawberry.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.4
• /
• pp.277-283
• /
• 2016

Background: The photosynthetic efficiency cool-season, semi-shade ginseng is normal at low morning temperatures, but drops at high afternoon temperatures. Therefore, optimal plant performance would be ensured if it were possible to control daily light transmission rates (LTR). Methods and Results: Plants were grown in a controlled light environment that replicated 11 AM conditions and comparatively analyzed against plant grown under normal conditions. Growth in the controlled light environment resulted in a 2.81 fold increase in photosynthetic efficiency with no change in chlorophyll content, although LTR were high due to low morning temperatures. Increased aerial plant growth was observed in the ginseng plants adapted to the controlled light environment, which in turn influenced root weight. An 81% increase in fresh root weight (33.3 g per plant on average) was observed in 4-year-old ginseng plants grown in controlled light environment compared to the plants grown following conventional practices (18.4 g per plant on average). With regard to the inorganic composition of leaves of 4-year-old ginseng plants grown in controlled light environment, an increased in Fe content was observed, while Mn and Zn content decreased, and total ginsenoside content of roots increased 2.37 fold. Conclusions: Growth of ginseng under a favorable light environment, such as the condition which exist naturally at 11 AM and are suitable for the plant's photosynthetic activity creates the possibility of large scale production, excellent-quality ginseng.

• KSBB Journal
• /
• v.16 no.6
• /
• pp.568-572
• /
• 2001

Light is one of the most important environmental factors controlling plant physiology. The human granulocyte-macrophage colony-stimulating factor (hGM-CSF) was produced from cell suspension cultures of transgenic tobacco under different light conditions (24 hr light, 18 hr light/dark cycle, dark). Under 24 hr light condition, cell growth was best and dry cell weight reached 14.4 g/L. Light did not influenced the secretion of total proteins. However, in the dark condition, the ratio of secreted total protein/dry cell weight was 1.5 fold higher than those of ethel conditions. Production of hGM-CSF was highest with 18 hr light condition and reached 496.5 ug/L. In addition, the content of hGM-CSf in secreted total proteins was 1.8 fold higher than that of 24 hr light condition, which is beneficial for the purificationof the protein.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.77-82
• /
• 2012

It is well known that the targeted fuel efficiency could only be achieved by more than 40% reduction of the vehicle weight through improved design and extensive utilization of lightweight materials. In order to obtain the goal of the weight reduction of automobiles, the researches about lighter and stronger rear sub-frame have been studied without sacrificing the safety of rear sub-frame. In this study, the weight reduction design process of rear sub-frame could be proposed based on the variation of von-Mises stress contour by substituting an AA6061 (aluminum 6061 alloy) having tensile strength of 310 MPa grade instead of SAPH440 steels. In addition, the stress ratio variations (stress over fatigue limit) of the rear sub-frame were examined and compared carefully. It could be reached that this approach method could be well established and be contributed for light-weight design guide and the optimum design conditions of the automotive rear sub-frame development.