• Korean Journal of Medicinal Crop Science
• /
• v.18 no.1
• /
• pp.51-55
• /
• 2010

This study was conducted to investigate the effect of planting position on the growth characteristics, yield and ginsenoside content in Panax ginseng C.A. Meyer at different growth stages. Referring to shoot growth characteristics, stem length, stem diameter and leave area were higher at front than rear, increasing as the proceeding of growth stages. But a lower chlorophyll contents was caused at front compared to rear and decreased as the proceeding of growth stages contrarily. According to root characteristics, root length and main body length were higher at front, with a positive correlation to growth stages, which was also shown on fresh root weight and dry root weight with the maximum in August. Meanwhile, the effect of planting position on ginsenoside content could also be definite by the highest content at front showing high light intensity, increasing as the proceeding of growth stages as well.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.259-268
• /
• 2005

In order to analyze the sheet drawability, the measurement of the plastic strain ratio was carried out for the 5182 aluminum alloy sheets in which were cold rolled without lubrication and subsequent recrystallization annealing. The average plastic strain ratio of the 5182 aluminum sheets was 1.50. It was considered that the higher plastic strain ratio was resulted from the ND//<111> component evolved during rolling and maintained during annealing. The AA5182/polypropylene/AA5182 (AA/PP/AA) sandwich sheets of the 5182 aluminum alloy skin sheet and the polypropylene core sheet with high formability have been developed for application for automotive body panels in future light weight vehicles with significant weight reduction. The AA/PP/AA sandwich sheets were fabricated by the adhesion of the core sheet and the upper and lower skin sheets. The AA/PP/AA sandwich sheet had high plastic strain ratio (1.58), however, the planar anisotropy of the sandwich sheet was little changed after fabrication. The optimum combination of directionality of the upper and lower skin sheets having high plastic strain ratio and low planar anisotropy was calculated theoretically and an advanced process for producing the sandwich sheets with high plastic strain ratio was proposed. The developed sandwich sheets have a high average plastic strain ratio of 1.55 and a low planar anisotropy of 0.17, which was improved more by 3.2 times than that of 5182 aluminum single sheet.

• Journal of the Ergonomics Society of Korea
• /
• v.6 no.2
• /
• pp.3-8
• /
• 1987

In order to secure reliable values of measurement of the data about children's longitudinal develop- ment and physique examination and their growth states for 6 years from first grade through sixth grade in elementary school was collected based on their school health records. A sample physique group and general physique group were investigated and compared classified into girls and boys. The results are as follows; (1) Whe the difference of physiques in the sample group and general group is compared, boys and girls show little difference in height but boys differ greatly in weight and sitting-height but girls do in weight, girth of chest and sitting-height between 8 and 11 years old. (2) In the verification of the two groups; the body height in 7 years old show a significant difference at the P<0.5 level and their weights do at 7.8 and 11 years old. Girls' sitting-height at 11 years old shows a significant difference at the P<0.5 level. In the light of the above results because possibility of instrumental error in measurement is high between the two groups and also in case of the comparison of past sample data, the physique examination used in every school seems to be in need of reconsideration to reduce errors in measurement.

• The Journal of Internal Korean Medicine
• /
• v.31 no.1
• /
• pp.11-24
• /
• 2010

Objectives : This study was carried out to investigate the hepatoprotective effects of mixture with Hovenia dulcis Thunb (HDT) and Acer tegmentosum Maxim(ATM) on D-galactosamine-induced liver failure in rats. Methods : The animals were divided into 4 groups: control, with liver failure and no treatment; H1A1, with liver failure and oral treatment with HDT 1 and ATM 1; H1A2, with liver failure and oral treatment with HDT 1 and ATM 2; H1A4, with liver failure and oral treatment with HDT 1 and ATM 4. The animals were treated for 3 weeks and then examinations of change of body weight, aspartate aminotransferase (AST), alanine aminotransferase (ALT), gamma glutamyl transpeptidase ($\gamma$-GTP), total cholesterol, triglyceride, total bilirubin, superoxide dismutase (SOD), catalase, histopathologic change, and complete blood count (CBC) were performed. Results : All experimental groups had significantly decreased AST in serum and markedly increased activity of SOD as compared with the control group. H1A1, and H1A4 significantly decreased ALT in serum and H1A4 at 2 weeks was significantly higher on the change of body weight as compared with the control group. In histopathologic change of liver tissue by light microscopy, all experimental groups showed recovery effects of liver cells which were damaged by D-galactosamine. Conclusions : Based upon these results, it could be assumed that a mixture of HDT and ATM has hepatoprotective and antioxidative effects on D-galactosamine-induced liver failure. Therefore, a mixture of HDT and ATM might be utilized as a protective agent in therapy for liver diseases.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.309-313
• /
• 2006

Many researchers have studied on the lightness of automobile. These researches are such as a body shell, sub frame, fuel tank, engine etc. The transmission Part is a magnitude one in the aspect of weight. A drive shaft (propeller shaft) transmits the engine power to rear differential gear assembly. It is used in the compact car that is a single drive shaft. But in the case of long body cars such as SUV (Sports Utility Vehicle), truck and large vehicle, two or three divided drive shaft are used to prevent the vibration damage from a drive shaft that has been taken high torsion and rotation. This multi-divided drive shaft structure is so heavy because it is assembled by yoke, center bearing and solid spline axis. When the rear axle move up and down, the spline shaft adjust the variation of a length between the transmission and rear axle gearbox. In this paper, it is studied in the experimental method that is a bending vibration characteristic of slip in tube shaped propeller shaft. This type propeller shaft is developed to combine the spline axis with drive shaft and can be light in weight of transmission part.

• The Research Journal of the Costume Culture
• /
• v.18 no.2
• /
• pp.290-303
• /
• 2010

In this research, I compared and analyzed the 'factors of style' that expresses and visualizes the 'characteristics of characters' and the characters from three movies each that was filmed with Kang Ho Song and Keong Ku Seol who acted in many movies both. As the result, for the factors for actors' makeup design, since they have limited choices of textures, colors, and the range of changes, changing the tone of skin to light to dark implied the images of characteristics. Somewhat dark skin tone that was like tanned skin expressed the life style of the character who works for an active profession not for an intellectual position. For the factors of hair style, medium sized wavy hair that goes straight down forehead expressed the character's familiar and informal personality while short cut sized all back style hair expressed confidence, sociality, and logical personality of the character. The actors' costume was important to express the characteristics of characters such as changes of their mind, especially the costumes delivered symbolic meanings of the role of their social class, profession, and their financial state. In addition, there were common factors to create and design a character in terms of the changes of the actors' body shape; when the actor acted the character who has conflicts inside and sarcastic personality, they lost weight on purpose while they gained weight and made a barrel shaped body to act the character who is positive in every occasion and does not realize the real world or who is greed.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.3
• /
• pp.290-299
• /
• 2010

The bioactive effects of ethanol extracts from fly maggot (ME) on reduction of plasma lipids levels in rats fed high-fat diets (Expt. Ⅰ), and on liver function recovery of hepatotoxicity rats by intraperitoneal injection of carbon tetrachloride ($CCl_4$) or by orally administration of alcohol (Expt. II) were investigated. In expt. I, twenty seven, male rat SDS(sprague dawley strain) were randomly assigned to three treated groups, including normal control group, HF (group with high fat diets which have no extracts) and HFE (HF plus orally administered doses of ME extract at 5.0 mg/100g of body weight). In expt. II, forty five, male rats (SDS) were randomly assigned to each of the five groups: T1 (control), T2 (intraperitoneal injection of $CCl_4$), T3 (intraperitoneal injection of $CCl_4$ after orally administered with ME), T4 (orally administered with combination of ME and alcohol), T5 (orally administration of ME after orally administered with alcohol). There were significant decreases in plasma (TAG), (TC), (LDL-C) in the HFE group with orally administered doses of ME at 5.0 mg/100g of body weight, respectively, however, the (HDL-C) were significantly increased in HFE group as compared to HF group with high fat diets which have no extracts (p<0.05). The levels of aspartate aminotransferase (AST), alanine aminotransferase (ALT), ${\gamma}$-glutamyl transferse(${\gamma}$-GTP) and bilirubin were highest in T2 or T3, and high in order T4 or T5, and lowest in T1 except for bilirubin which has same with T4, T5 (p<0.05). The high recovery of liver damage by $CCl_4$ from the light microscopic appearance was observed in rats (T3) with extracts, and also high in T4 than T5 by orally administrated with alcohol. In conclusion, the ethanol extracts from fly maggot may have a bioactive effects to prevent for human lipids disorder and alcoholic disease.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.54-57
• /
• 2001

Hydroforming is core production techniques for the super light weight and high safety of the vehicle body. In order to establish and understand hydroforming, the tube hydroforming simulator which could control an axial compression and high internal pressure with computer operation was developed in tube bulging. This paper presents experimental investigation for process parameters, such as Internal pressure and axial compression. In addition, the mechanical properties, such as strain hardening and energy absorption ability of hydroformed part, is discussed.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.304-309
• /
• 1991

We introduce the trend, of several countries, to the gas insulated transformer recently coming into the spot light by the advantages of less weight, GIS-lization, low noise level and easiness to decrease environmental pollutions, and the insulating gases. the cooling media and the insulating materials used for transformer. Hereinafter, additively the design of proto type $SF_6$ gas insulated transformer (insulation, cooling), which was developed by us(HICO) from 1987. 2 through 1990. 3, the manufacturing processes(leak protection, pressure, drying of main body), the accessories, the protective system, the cooling system, the method and the results of test and the evaluation of economics compared with conventional oil-filled transformer are represented.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.295-299
• /
• 2007

Biped robot requires that an energy source and a control part should be installed on the body to realize active system. So, we choose the DC motor having high torque in compact size in this study. In the DC motor serve system, we choose power amplifier with analog configuration, developed the module combined the controller and the driver. We applied this module to robot actuator and studied the response characteristics in an action and a return. Main controller with serve system, loading PIC micro controller, can be load on the robot with light weight.