• 대한화장품학회지
• /
• 제34권2호
• /
• pp.75-82
• /
• 2008

본 연구에서는 금 나노입자 콜로이드를 이용하여 safranin-O의 광촉매적 분해를 관찰하였다. 금 나노입자는 용액상에서 safranin-O의 분해 속도를 빠르게 하기 위해서 사용되었다. 금 나노입자 콜로이드는 수용액상에서 $Na_2CO_3$와 PVP 고분자(poly(vinyl pyrrolidone))를 이용하는 환원방법에 의하여 제조하였다. Safranin-O의 분해현상은 자외선(UV light)와 과산화수소($H_2O_2$)의 존재 하에서 금 나노입자 콜로이드와 염화금의 농도, 반응계의 산도(pH), 반응시간과 같은 실험조건들의 조절을 통해 연구되었다. 분해반응에 사용된 금 나노입자 콜로이드의 농도가 증가함에 따라서 염료가 분해되는 속도가 증가하였다. Safranin-O의 광산화 반응은 광학적으로 측정되었고, 금 나노입자의 기본적인 물성과 촉매 특성은 UV-Vis 광학계를 이용하여 측정되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.337-347
• /
• 2006

Papers made from unbleached and bleached bagasse chemimechanical pulp were chemically modified by acetylation. The effects of irradiation on unbleached and bleached also reduced papers of bagasse chemimechanical pulp before and after acetylation were investigated in this study. Chemimechanical pulp was prepared from bagasse and then bleached with hydrogen peroxide. Unbleached and hydrogen bleached pulps were reduced by Sodium borohydride in different procedures. Paper sheets were prepared from pulps and then acetylated using a technical grade of acetic anhydride. Accelerated photo-aging was run on the samples using fluorescent lamps to verify photo-stability of paper sheets before and after pretreatments. Brightness reversion (as Post-color number) and other optical properties of the paper sheets were measured. Efficient inhibition of photo-yellowing of papers made from bagasse CMP was achieved by acetylation. The acetylated unbleached CMP was noticeably photo-bleached during irradiation. Sodium borohydride reduction followed by acetylation had the same effect as acetylation alone at the same degree of reaction time and reductive treatment did not affect the yellowing rate to any great extent. The pre-reduced, acetylated unbleached papers were, however, not brightened during irradiation. Calculation done by Kubelka-Munk equation showed that reductive treatment had little effect in reducing the photo-yellowing of paper made from CMP pulp; a small stabilization effect was observed in the case of bleached CMP, while unbleached CMP was slightly more prone to discolor in the later phase of photo-reversion. The improved stability towards light may was closely related to the decrease in the phenolic hydroxyl content as a result of blocking by acetyl groups during treatment with acetic anhydride. The results support the hypothesis that phenolic hydroxyl has an important role in the process of photo-reversion of high-yield pulps. The results obtained in this study demonstrate that the acetylation of paper manufactured from peroxide bleached Bagasse CMP significantly retards light-induced discoloration. The inhibition of yellowing is connected with a decrease in the phenolic hydroxyl content of both unbleached and peroxide bleached papers.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.110-114
• /
• 2021

In this study, we fabricated light-weight solar module for various applications such as building integrated photovoltaics (BIPV), vehicles, trains, etc. Ethylene tetra fluoro ethylene (ETFE) film was applied as a material to replace the cover glass, which occupies more than 65% of the weight of the PV module. Glass fiber reinforced plastic (GRP) was applied to the ones with a low durability by replacing the cover glass to ETFE. Moreover, to achieve a high solar power conversion in this study, we applied a shingled design to weight reduced solar modules. The shingled module with GRP shows 183.7 W of solar-to-power conversion, and the output reduction rate after weight load test was 1.14%.

• 대한전자공학회논문지SP
• /
• 제49권3호
• /
• pp.30-39
• /
• 2012

본 논문에서는 검출된 운전자의 얼굴영역에서 눈의 형태를 인식하여 졸음 상태를 감지하는 기법을 개발하고 감지 결과에 따라 위험 상태를 알려주는 경보 시스템을 구현하고자 한다. 먼저 얼굴 검출에는 Haar 변환 기법을 이용하고 실험실환경, 차량환경 및 적외선 영상을 획득하여 다양한 조명 환경에서도 강인하도록 전처리 및 후처리 과정을 적용한다. 눈 검출에는 보통 한국인이라는 가정하에 눈의 위치 및 크기의 비례 구조 특성 등을 이용하여 후보 영역을 제한하고 트리구조에 대한 실험 결과로 고속 알고리즘을 구현하였다. 또한 졸음 상태를 인식하기 위해서는 눈의 개폐 형태를 검출할 수 있는 Hough 변환을 이용한 기법과 눈의 계폐에 따른 눈의 형태 비율을 이용한 기법을 새로이 제안하며, 눈이 감겨있는 시간을 측정하여 졸음 여부를 판단한다. 1단계 졸음 상태로 판단될 경우 통합 모니터링 인터페이스에서 운전자에게 경고음을 울리며 2단계 졸음 상태로 판단될 경우에는 CAN(Controller Area Network)을 통하여 안전벨트를 진동하게 함으로써 운전자에게 경고를 하는 시스템을 구현한다. 본 논문에서 제안하는 기법은 기존의 기법들과 비교하여 실험실 환경에서 평균 83.64% 이상의 검출률을 달성 하였으며, 실제 차량환경에서도 실험 결과를 통하여 평균적으로 우수한 결과를 보였다.

• Journal of Crop Science and Biotechnology
• /
• 제11권2호
• /
• pp.111-118
• /
• 2008

Soybean is sensitive to waterlogging stress, leading to reduce their growth and yield significantly. The objective of this study was to characterize the relative sensitivities of biomass accumulation and specific nodule activity under waterlogging stress between supernoduating mutants, 'SS2-2' and 'Sakukei 4' and their wild-type soybeans, 'Sinpaldalkong 2' and 'Enrei', respectively. Flooding treatment was performed to soybean plants grown in a pot by waterlogging for 15 days from the beginning bloom(R1) stage under natural light. The nodule number and weight were considerably decreased by waterlogging stress. The bleeding sap rate of waterlogging soybean plants was decreased by 78-80% in supernodulating mutants and 65-74% in their wild types compared to control plants. The relative ureide-N content was also decreased by waterlogging and the reduction was high in supernodulating mutants. This may cause the massive reduction of shoot and root dry weight and leaf area in waterlogged soybean plants. There was a varietal difference in response to the waterlogging stress. During the waterlogging, supernodulating mutants maintained higher spad value than their wild types. Particularly, the difference between soybean varieties was clear in low rank leaves from the top. Also, supernodulating mutants showed a weak waterlogging tolerance than their wild types. Under waterlogging conditions, massive nodules were considerably destroyed and specific nodule activity after waterlogging may not be recovered when compared to their wild-type soybeans. Supernodulating mutants showed lower seed yield than their wild types in waterlogging conditions.

• 펄프종이기술
• /
• 제42권1호
• /
• pp.54-63
• /
• 2010

Recently, as the function of largest supplier of biomass for "low carbon green growth", the necessity for systematic management of afforestation areas is emphasizing. The forestation of seedling, besides the afforestation cost itself, is required some additional follow-up management costs, like mowing and fertilizing of forestation area, and removal of bindweed. The mulching mat for afforestation seedlings is available for rooting of little seedlings as well as initial forestation expenses. Mulching technique is also used to control soil temperature and moisture by covering the surface of ground. In this study, the paper based-mulching film coated with biodegradable polymer and functional additive was specially produced using laboratory bar coater, and analyzed for its degradable behavior. Coating colors were prepared by dissolving PE (polyester) 80 % and PLA(polylactic acid) 20 % in chloroform and finally applied to handsheet prepared by preceding study conditions. Base paper and polymer-coated paper were artificially aged by 2 kinds of degradation methods, which are soil degradation by microorganism and light degradation by 257 nm UV wavelengths. Strength property, oxidation index and morphological property were evaluated by reduction rates of tensile strength, FTIR spectra ratio of carboxyl and carbonyl group and SEM micrograph. As these results, polymer coated-paper was superior to base paper in degradation behaviors, having results with lower reduction rate of strength properties.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권5호
• /
• pp.422-428
• /
• 2009

플래시 메모리는 부피가 작고, 가볍고, 소비전력이 낮으며 입출력이 빨라 최근 소형기기의 저장 장치로 널리 사용이 되고 있다. 그러나 플래시 메모리는 지움 연산을 수반하는 가비지 컬렉션을 수행해야 한다. 지움 연산은 속도가 느리고, 각 블록마다 지움 연산 횟수가 제한이 있다. 따라서 본 논문에서는 지움 연산 횟수와 각 블록의 지움 횟수 편차를 줄이는데 초점을 맞춘 균등화 정책을 제안한다. 따라서 플래시 메모리의 페이지 사용률에 기반을 둔 두 가지 가비지 컬렉션 수행 모드를 정의하고 그리고 각 모드에 대해 다른 지움 비용을 계산하여 전체 지움 연산 횟수와 각 블록의 지움 횟수 편차를 최소화하는 가비지 컬렉션 기법을 제안한다. 추가로 가비지 컬렉션 연산 시간을 최소화하기 위해 그룹 관리 기법을 제안해 보다 빠른 수행 시간을 가질 수 있도록 한다. 실험 결과 제안하는 정책은 기존의 Greedy 와 CAT 기법의 장점들을 동시에 나타내었고, 지움 횟수 편차를 평균 85% 감소 시켰고 가비지 컬렉션 수행 시간을 최대 6% 단축 시켰다

• 한국식물병리학회지
• /
• 제13권4호
• /
• pp.210-214
• /
• 1997

포도 흰가루병균(Uncinula necutor)의 분생포자 형성, 발아 및 균사 초기생장에 미치는 중요 환경오인과 살균제의 영향을 구명하기 위하여 수행한 연구 결과를 요약하면 다음과같다. 분생포자 형성은 상대습도 76~96%에서 가장 좋았다. 포자 발아 및 균사 초기생장은 증류수에 비해 5% 한천배지에서 좋았으며, 온도 $26^{\circ}C$, pH 5.0일 때 가장 좋았다. 광 100 lux는 암상태와 발아율에 차이가 없었으며 한천배지에 포도 엽즙액 30%를 첨가한 배지에서는 순수 한천배지 보다 좋았다. 또 triazole계 살균제 첨가 배지에서의 포자발아 및 균사생장은 살균제 농도증가에 비례하여 급격히 감소하였으나 그 정도는 살균제의 종류에 따라 차이가 있었다. 특히, myclobutanil은 농도증가에 따른 발아율의 감소정도가 매우 낮았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.124-124
• /
• 2010

Much interest has been focused on InGaN-based materials and their quantum structures due to their optoelectronics applications such as light emitting diode (LED) and photovoltaic devices, because of its high thermal conductivity, high optical efficiency, and direct wide band gap, in spite of their high density of threading dislocations. Build-in internal field-induced quantum-confined Stark effect in InGaN/GaN quantum well LED structures results in a spatial separation of electrons and holes, which leads to a reduction of radiative recombination rate. Therefore, many growth techniques have been developed by utilizing lateral over-growth mode or by inserting additional layers such as patterned layer and superlattices for reducing threading dislocations and internal fields. In this work, we investigated various characteristics of InGaN multiple quantum wells (MQWs) LED structures grown on selectively wet-etched porous (SWEP) GaN template layer and compared with those grown on non-porous GaN template layer over c-plane sapphire substrates. From the surface morphology measured by atomic force microscope, high resolution X-ray diffraction analysis, low temperature photoluminescence (PL) and PL excitation measurements, good structural and optical properties were observed on both LED structures. However, InGaN MQWs LED structures grown on SWEP GaN template layer show relatively low In composition, thin well width, and blue shift of PL spectra on MQW emission. These results were explained by rough surface of template layer, reduction of residual compressive stress, and less piezoelectric field on MQWs by utilizing SWEP GaN template layer. Better electrical properties were also observed for InGaN MQWs on SWEP GaN template layer, specially at reverse operating condition for I-V measurements.