• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.839-842
• /
• 2004

We present a fast-switching electro-optical device based on flexoelectro-optic effect in short pitch cholesterics oriented in uniform lying helix texture. The device has two operating modes: amplitude and phase modulation mode. The amplitude modulation mode is a fast in-plane switching of the device optic axis that enables to achieve a high percent of modulation of the transmitted light intensity whereas the phase mode gives a continuous change of the refractive index and thus of the phase shift of the transmitted light. By using a small concentration of diacrylate monomer and selecting the illumination conditions we have been able to create a inhomogeneous polymeric network mostly localized at both substrate surfaces and stabilize the two switching modes.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.15-22
• /
• 2014

We present a novel bandwidth measurement scheme for multimode optical fibers. Amplified spontaneous emission (ASE) radiation was utilized for a source of intrinsically modulated light with a wide modulation bandwidth. In our measurement scheme, the continuous-wave (CW) ASE light that passed through a multimode fiber (MMF) under test was analyzed by the fourth-order power with a high-speed photodetector and an electric spectrum analyzer. The modulation transfer function of the multimode fiber could be directly measured with the photoelectric spectra in the modulation frequency domain. The measurement result of our method was experimentally compared to that of the conventional measurement scheme based on the impulse response measurement. It has been found that our scheme provides a stable measurement means of MMF characterization that is suitable for the field testing due to the simplicity of the system.

• 한국통신학회논문지
• /
• 제29권5A호
• /
• pp.473-483
• /
• 2004

8 채널 ${\times}$ 40 Gbps 파장 분할 다중 (WDM ： Wavelength Division Multiplexing) 시스템에서 색 분산과 자기 위상 변조에 의해 왜곡된 광 펄스를 최상으로 보상할 수 있는 광 위상 공액기 (OPC : Optical Phase Conjugator)의 최적 펌프 광 전력을 채널 입력 전력 변화에 따라 수치 해석적으로 살펴보았다. 또한 OPC의 펌프 전력 변화에 따른 수신단에서 허용 가능한 채널의 최대 입력 전력 크기를 변조 파형 형식, 광섬유 분산 계수에 따라 살펴보았다. 본 논문에서 고찰한 WDM 시스템은 전체 전송 링크 중간에 HNL-DSF (Highly- Nonlinear Dispersion Shifted fiber)를 비선형 매질로 이용한 OPC를 두어 보상하는 경로 평균 강도 근사 (PAIA ： Path-Averaged Intensity Approximation) MSSI (Mid-Span Spectral Inversion) 기법에 기초를 두고 있다. 우선 최소의 눈 열림 패널티를 만드는 HNL-DSF On의 특정 펌프 광 전력의 크기는 변조 파형 형식, 초기 채널 입력 전력, 총 전송 거리, 광섬유분산 등의 복합적인 영향에 따라 다소 변화될 수는 있지만 전력 변환비를 1 근처로 만드는 값에서 결정되어야 한다는 것을 알 수 있었다. 또한 HNL-DSP OPC의 펌프 광 전력이 최소의 EOP를 결과하는 최적의 값이 아닌 다른 값으로 설정되어 있는 경우 양호한 수신을 가능하게 하는 채널의 최대 입력 전력 크기는 광섬유의 분산 계수가 비교적 적은 WDM 시스템에서 변조 파형 형식으로 NRZ보다 RZ를 사통하면 더욱 증가되는 것을 확인할 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.459-465
• /
• 2014

Visible light communications (VLC) using the intensity modulation of light-emitting diodes (LEDs) provides a new communication medium to overcome the shortage of radio spectrum, and allows reuse of LED lighting infrastructures. Orthogonal frequency-division multiplexing (OFDM) was introduced to VLC for its merits in mitigating the fading effects resulting from delay spread, and in avoiding low-frequency ambient interference. Noise and clipping are two major factors that degrade the performance of OFDM in VLC. A larger signal easily overcomes noise, but experiences impairment by clipping. Therefore, degradation due to clipping has a trade-off relationship with that due to noise, depending on the signal amplitude of OFDM. In this paper, the optimal signal amplitude in the trade-off is obtained by simulation when the dimming and LED intensity are given. The former indicates a user's requirement for lighting, and the latter represents the channel quality. The required LED intensity-to-noise ratio, as the channel quality that guarantees dimming as well as an adequate bit-error rate (BER), is also discussed.

• 수면정신생리
• /
• 제1권2호
• /
• pp.156-162
• /
• 1994

목 적 : 눈깜작임은 뇌에서 감각을 조절하는 기능과 관계된 개인의 인지능력과 성격에 따라 달라질 수 있다. 저자들은 이러한 성격이 눈깜작임과 증감뇌유발전위 등과 상호 어떠한 연관이 있는지를 연구하려고 하였다. 방법 : 44 명의 정상 대학생에게 증감뇌유발전위, 눈깜작임과 Zuckerman 의 감각추구척도와 Eysenck 성격설문지 동을 조사하여 그 상호관계를 분석하였다. 결 과 : 증감뇌유발전위에서 빛의 강도가 증가할수록 눈깜작임이 증가하였다. 대부분의 성격척도에서 눈깜작임과 유의한 역상관관계를 보였으며 신경증척도만이 정상관관계를 보였다. 눈깜작임과 증감유발전위의 기울기와 가장 강한 정상관관계를 보인 뇌의 부위는 우측 후 측두엽이었다. 결 론 : 감각추구경향이 강할수록 눈을 적게 깜작이었다. 유발전위보다 눈깜작임이 성격과 더 높은 상관관계를 보여 눈깜작임이 더 일차적인 필터 역할을 한다고 생각된다. 그리고 우측 후 측두엽은 여러 뇌 부위 중 시각을 조절하는데 가장 중요한 역할을 하는 것으로 유추된다.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• 대한전자공학회논문지
• /
• 제7권2호
• /
• pp.1-12
• /
• 1970

본 논문에서는 선형전기광효과(Pockel 효과)를 이용하여 X대역 마이크로파(9375 MHz)를 광변조하는데 관하여 이론적인 해석과 실험적인 연구를 했다. 전기광 결정체 KDP를 공진형 변조기로 설계하여 z축으로 광선과 평행하게 마이크로파 전계를 인가하여 변조했다. 변조파 출력을 가변단락판의 위치변화에 따라 관찰했으며 /2에서 변조가 잘 개폐되는 것을 알았다. 또한 출력변조의 세기를 인가 전계의 세기를 변화시켜 측정하여 이론곡선과 비교해서 약 5%의 오차를 얻었다. 결과적으로 아직 해결되어야 할 문제는 많이 있지만 비교적 만족스러운 광변조기를 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집
• /
• pp.10-11
• /
• 2008

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage. And then, each experiment was performed to irradiation group and non-irradiation group for bone marrow cells. MIT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of bone marrow cells was verified in irradiation group as compared to non-irradiation group.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.629-634
• /
• 2000

This System is developed for the estimation of the Camera Lens Resolution. Signal data proportional to light intensity is obtained and sampled from the 2D CCD. Based on the measured signal. the MTF charateristcs of a camera lens are measured. We could measure the sagittal and tangential MTF in the on and off-axis at the same time. The automatic measurig methods for optimal image plane, magnification, and best marginal direction of test lens are presented.