• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.64-72
• /
• 2004

The research was carried out to define the environmental characteristics and vegetation structure of the evergreen fern habitat in Jejudo. The growth conditions of evergreen fern in various habitats was surveyed, including topographical features, vegetation structure, air temperature, humidity, intensity of light, water content and organic matter content in the soil. In the direction of the native habitat, 70% of research area was located in the southeast-facing slopes, 30% was located in southern slopes. The gradient ranged from $0^{\circ}$ to $30^{\circ}$. Temperature ranged from $16^{\circ}C$ to $28^{\circ}C$, and $22.3^{\circ}C$ was the average. Humidity ranged from 20 to 68%, and 36% was the average. In the native habitat, the highest light intensities reached 60,000 to 80,0001ux, but in general ranged from 300 to 40001ux. Water content in the soil ranged from 32% to 59%, organic matter content ranged from 8 to 13%. Within a unit of 25$m^2$, there were tall-tree layer such as Quercus galuca and Castanopsis cuspidata with a covering of rate 40~80%, a sub-tall-tree layer such as Camellia japonica, Staphylea bumalda and Sambucus williamsii with the covering rate of 3~5%, a shrub layer with the covering rate of 5~20%, and a grass layer with the covering rate of 40~95%. This research provides the basic data about the native habitat environment of the evergreen fern plant. Continuous monitoring and accumulation of data is necessary for the use of evergreen fern as vegetation materials.

• Childhood Kidney Diseases
• /
• v.15 no.1
• /
• pp.29-37
• /
• 2011

To understand the course of renal diseases well, we must have basic knowledges of histologic procedures of renal biopsy samples as well as basic pathologic changes. This article describes the method of dividing the biopsy samples, fixatives for various pathologic examinations and basic pathologic changes of glomerular diseases. For light microscopic examination, color changes of glomerular structures in PAS, trichrome and PAM stains, normal glomerular patterns compared to various glomerulopathies are introduced. While describing typical staining patterns and intensities of fluorescence in membranous glomerulopathy and IgA nephropathy, basic interpretation of immunofluorescent microscopic examination is described. To understand electron microscopic pictures of renal diseases, preference locations of electron dense deposits in various glomerulonephrites are described with schema. This article is the introduction part of the renal pathology and for the further detail changes of specific entities, we should reference the renal pathology textbooks or articles.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.9
• /
• pp.1276-1282
• /
• 2010

In traditional mixotrophic cultures of microalgae, all the inorganic nutrients and organic carbon sources are supplied in the medium before inoculation. In this study, however, an alternative approach was adopted in Haematococcus pluvialis Flotow, a microalga capable of growing mixotrophically on sodium acetate (Na-Ac). First, the cells were grown under 75 ${\mu}Mol$ photons $m^{-2}s^{-1}$ phototrophically without Na-Ac until the stationary phase and then exposed to five different light regimes by the addition of Na-Ac (e.g., dark, 20, 40, 75, and 150 ${\mu}Mol$ photons $m^{-2}s^{-1}$). Dry weight (DW), pigments, and especially cell number in alternative mixotrophy (AM) were higher than traditional mixotrophy (TM). Cell number in AM almost doubled up from 21.7 to $42.9{\times}10^4$ cells/ml during 5-day exposure to Na-Ac, whereas the increase was only 1.2-fold in TM. Maximum cell density was reached in 75 ${\mu}Mol$ photons $m^{-2}s^{-1}$ among the light intensities tested. We propose that Na-Ac in TM of H. pluvialis can not be utilized as efficiently as in AM. With this respect, AM has several advantages against TM such as a much higher cell density in a batch culture period and minimized risk of contamination owing to the shorter exposure of cells to organic carbon sources. In consequence, this method may be used for other strains of the species, and even for the other microalgal species able to grow mixotrophically.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.39-43
• /
• 1998

Single crystals of{{{{ { Zn}_{ 1-x} {Mn }_{x }{Te} }}}} with x=0.3-0.6 were prepared by the standard Bridgeman method. Diffuse neutron diffraction intensities due to the short range magnetic ordering is found in the vicinities of 1 1/2 0 reciprocal point and its equivalent point, indicating that the magnetic correlation of the clusters is the type III antiferromangetic one do the F-type Bravais class crystals, being identical with that of {{{{{ Cd}_{ 1-x} {Mn }_{x }Te }}}}. Neutron inelastic scattering measure-ment has been performed for {{{{{ Zn}_{ 0.6} { Mn}_{ 0.4}Te }}}} sample using the cold neutron spectrometer. AGNES. High resolution measurement with the energy resolution of {{{{ TRIANGLE E= +- .01meV}}}} was carried out in the temperature range from 10K to the ambient. Critical scattering, closely related with the spin glass transition, has been observed for the first time in this semimagnetic semi-conductor. The critical scattering is observed at temperatures in the vicinity of the spin glass transition temperature, 17K. The scattering is observed as a kind of quasielastic scattering in the reciprocal range where the elastic magnetic diffuse scattering has been observed, e.g., 11/20 reciprocal point, indicating the spin fluctuation has dynamic components in this material. Photoconductivity has been discovered below 150K in {{{{{ Zn}_{ 0.4} {Mn }_{0.6 } Te}}}}. The electric AC conductivity has been increased dramatically under the laser light with the wave lengths of {{{{ lambda =6328,5145 and4880 }}}}$\AA$ ,respectively. After the light was darkened, the conductivity was reduced to the original level after about 2000 seconds at 50K, being above the spin glass transition temperature. This phenomenon is the typical persistent photoconductivity; PPC which was similarly found in {{{{ { Zn}_{ 1-x} { Mn}_{x} Te}}}}.

• Journal of The Korean Astronomical Society
• /
• v.48 no.1
• /
• pp.57-66
• /
• 2015

Monte-Carlo radiative models of the diffuse Galactic light (DGL) in our Galaxy are calculated using the dust radiative transfer code MoCafe, which is three-dimensional and takes full account of multiple scattering. The code is recently updated to use a fast voxel traversal algorithm, which has dramatically increased the computing speed. The radiative transfer models are calculated with the generally accepted dust scale-height of 0.1 kpc. The stellar scale-heights are assumed to be 0.1 or 0.35 kpc, appropriate for far-ultraviolet (FUV) and optical wavelengths, respectively. The face-on optical depth, measured perpendicular to the Galactic plane, is also varied from 0.2 to 0.6, suitable to the optical to FUV wavelengths, respectively. We find that the DGL at high Galactic latitudes is mostly due to backward or large-angle scattering of starlight originating from the local stars within a radial distance of r < 0.5 kpc from the Earth. On the other hand, the DGL measured in the Galactic plane is mostly due to stars at a distance range that corresponds to an optical depth of $${\sim_\sim}$$ 1 measured from the Earth. Therefore, the low-latitude DGL at the FUV wavelength band would be mostly caused by the stars located at a distance of $r{\leq}0.5$ kpc and the optical DGL near the Galactic plane mainly originates from stars within a distance range of $1{\leq}r{\leq}2kpc$. We also calculate the radiative transfer models in a clumpy two-phase medium. The clumpy two-phase models provide lower intensities at high Galactic latitudes compared to the uniform density models, because of the lower effective optical depth in clumpy media. However, no significant difference in the intensity at the Galactic plane is found.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.209-217
• /
• 2002

We studied the mechanism of orientation of polyimide molecules which were irradiated by polarized UU (PUV) using polarized Fourier transform infrared (FT-IR) spectroscopy and ultraviolet (UV) spectroscopy, According to the measured UV spectra, we found PI films mainly absorb UV light less than 350 nm wavelength, therefore, UV light less than 360 nm induces photochemical reaction of PI. PUV irradiation of PI films caused decrease of all peak intensities in the FT-IR spectra. except the newly formed broad peak at $3244 cm^{-1}$, due to degradation of the PI molecules. The remaining PI molecules after photo-degradation showed predominantly perpendicular molecular orientation to the irradiated PUV polarization direction, due to the preferential degradation of PI molecules parallel to irradiated PUV polarization direction. However the rubbing of PI films induced reorientation of the PI molecules parallel to the rubbing direction. We also investigated the alignment of the liquid crystal by rubbing or PUV irradiation. Liquid crystals align perpendicular to the PUV polarization direction and parallel to the rubbing direction.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.794-798
• /
• 2001

$Y_{2-x}SiO_5:Ce_x^{3+}$(x=0.002∼0.04) phosphors were prepared by sol-gel process, amorphous crystal phase was observed in calcining dry gel at 800$^{\circ}$C, but pure $X_2$ type of type $Y_2SiO_5$ phase appeared from heat treatment above 1000$^{\circ}$C. Light absorption of tye $Y_2SiO_5$ host lattice occurred at 230∼360nm, and light absorption of the $Y_{2-x}SiO_5:Ce_x^{3+}$ phosphors was observed at 300∼400nm in adding $Ce^{3+}$. $Y_{2-x}SiO_5:Ce_x^{3+}$ phosphors showed maximum emission shoulder at 436nm. Maximum CL intensities of $Y_{2-x}SiO_5:Ce_x^{3+}$ were observed in adding 0.025 $Ce^{3+}$ and the phosphor showed x=0.161, y=0.124 in color coordinate of CIE1931.

• Microbiology and Biotechnology Letters
• /
• v.24 no.4
• /
• pp.519-524
• /
• 1996

The kinetics of growing microalga, Spirulina platensis was investigated to treat swine wastes with optimum growth conditions. Temperature was varied from 15 to 40$\circ$C at three different light intensities, 6 W/m$^{2}$, 12 W/m$^{2}$ and 24 W/m$^{2}$. The specific growth rate was increased as temperature increased up to 30$\circ$C. The activation energy was estimated as 13.5 kcal/mol by an Arrhenius relationship. 0.24 (1/day) of specific growth rate was obtained from batch cultivation with 30% swine wastes, compared to 0.31 (1/day) from clean culture. It was found that Spirulina platensis was able to reduce 70-93% of PO$_{4}$$^{3-}$ -P, 67-93% of inorganic nitrogen, 80-90% of COD and 37-56% organic nitrogen by adding various concentrations of swine wastes for 12 days of batch cultivation. Rate constants for removing nitrates and phosphates in treating swine wastes were estimated as 0.17 (1/day) and 0.14 (1/day) in the first order reaction, respectively. 1.52 (g/L) of maximum cell density was maintained at 0.20 (1/day) of dilution rate in continuous culture, adding 20% swine wastes for 30 days. The chemical composition of the biomass obtained from the process showed 58.7% of protein, 11.0% of lipid and 15.6% of ash.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.423-423
• /
• 2007

In this study, the effects of annealing conditions on the structural and optical properties of ZnO films were investigated. ZnO oxide (ZnO) films were deposited onto $SiO_2$/Si substrates by RF magnetron sputtering from a ZnO target. The substrate was not heated during deposition. ZnO films were annealed in temperature ranges of $500{\sim}650^{\circ}C$ in the $O_2$ flow for 5 ~ 20 min. The film average thicknesses were in the range of 291 nm. The surface morphologies and structures of the samples were characterized by SEM and XRD, respectively. The optical properties were evaluated by PL measurement at room temperature using a He-Cd 325 nm laser. According to the results, the optimal annealing conditions for the best photoluminescence (PL) characteristics were found to be oxygen fraction, ($O_2/O_2+Ar$) of 20%, RF power of 240W, substrate temperature of RT (room temperature), annealing condition of $600^{\circ}C$ for 20 min, and sputtering pressure of 20 mTorr. The obtained wavelength of light emission was found at 379 nm (ultraviolet-UV region). However, the optimal parameters for the best PL characteristics of ZnO thin films were not consistent with those obtained from the (002) intensities of XRD analyses. As a result, XRD pattern was not considered as the key issue concerning the intensity of PL of ZnO thin film. The intensity of the emitted UV light will correspond to the grain size of ZnO film.

• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.697-706
• /
• 2022

The effect of varied light intensities on the growth of daughter plants during propagation and after transplant to raised beds were examined in 'Sulhyang' strawberry. To this end, four treatments in controlling solar radiation inside a plastic house were made: 55% retractable shading and 35, 55, and 75% fixed shading. The plastic house was shaded only from 11:00 to 16:00 in June and 10:00 to 16:00 in July to September for the treatment of 55% retractable shading. The mean solar radiation inside the plastic house in the retractable 55% shading treatment was 317 W·m^-2 and those in the 35, 55, and 75% fixed shading treatments were 183, 165, and 116 W·m^-2, respectively, at 10 o'clock in the morning. The 55% and 75% fixed shading resulted in taller daughter plants with wider leaf areas than 55% retractable shading. The retractable shading also showed higher leaf numbers, crown diameters, root weights, and fresh weights compared to fixed shading treatments. Regarding the inorganic element contents, daughter plants grown under 75% fixed shading had 1.35% total nitrogen content followed by 1.19% in 35% fixed shading, 1.14% in 55% fixed shading, 1.14% in open culture, and 1.10% in 55% fixed shading. After 54 days following the transplant of daughter plants to a raised bed, the fresh weight of the aboveground part was the heaviest in the 55% retractable shading and non-shading treatments. The 75% fixed shading treatment had the lowest fresh weight of the aboveground plant parts. The results of this study could be used for the production of high-quality daughter strawberry plants.