• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.193-199
• /
• 1995

A novel imaging method in which time-division spinning reticle samples different pixel location of input image in different time is presented. The lens collects the beam passing throughthe reticle to a photodetector. Image reconstruction is accomplished by sampling the detector output corresponding to the spinning speed of reticle. Since the time-division reticle system removed the necessity of bandpass filter bank which has sharp cut-off characteristic, high resolution image is obtained without increasing the number of filter. To confirm the validity of this method, a computer simulation and an optical experiment using visual light are presented.

• 대한전자공학회논문지
• /
• 제26권8호
• /
• pp.1262-1269
• /
• 1989

For the efficient recognition of Korean characters, a modified ternary phase-only synthetic discriminanty function filter(MTPOF-SDF) is proposed. MTPOF-SDF can not only discriminate the true class patterns and the similar, symmetric, or patially included false ones but also recognize the diverse variations in true class patterns due to combinatorial form as the same ones. And scale and rotation-invariant recognition is achieved. To preserve the features of the characters, phase information should be used. And to contsrol phase information easily, ternary quantization of the phase is preferred. Also low resolution requirement is achieved for compatibility with low resulution devices such as spatial light modulators.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.83-88
• /
• 1997

We present a fiber laser sensor that uses a fiber grating as a strain sensor head and an end-reflector of the laser cavity. A passive wavelength. The long-period grating band-rejection filter showed a wide usable filter wavelength range of about 25 nm, and the intensity of transmitted light increased by 16% for 1nm sensor wavelength shift in trhe measurement range.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.502-510
• /
• 2008

UAVs(Unmanned Aerial Vehicles) have many applications in military and commercial areas. The flight control system of UAVs is more important than manned aircraft's because the mission of UAVs must be operated without a human pilot. But very heavy and expensive navigation system makes it difficult to develop UAV flight control system. In this research, GPS/IMU integrated navigation filter was developed for light weight/low cost flight control system of small UAVs. With this navigation filter, full flight control system which has real time operating capability has been developed. The performance of the flight control system is basically checked by HILSIM (Hardware In the Loop SIMulation). Finally, the flight control system is verified by showing performance test result under real flight environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.363-363
• /
• 2000

The conventional algorithms which identify and follow a moving target using a camera located at a fixed position are not appropriate for applying to the cases o( using mobile robots, due to their long processing time. This paper proposes a new tracking algorithm based on the sensing system which uses a line light with a single camera. The algorithm categirizes the motion patterns of a pair of mobile objects into parallel, branching, and merging motion, to decide of which objects the trajectories should be calculated to follow the reference object. Kalman Filter is used to estimate the trajectories of selected objects. The proposed algorithm has shown in the experiments that the mobile robot does not miss the target in most cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.342-342
• /
• 2000

We present 3-axis stabilized spacecraft attitude determination algorithm using the magnetometer. The magnetometer has been used as a reliable, light-weight and inexpensive sensor in attitude determination and reaction wheel momentum dumping system. Recent studies have attempted to use the magnetometer when other attitude sensor, such as star tracker, fails. The differences between the measured and computed the Earth's magnetic field components are spacecraft attitude errors. In this paper, we propose extended Kalman filter(EKF) to determine spacecraft attitude with the magnetometer data and gyro-measured body rates. We develop and simulate this algorithm using MATLAB/SIMULINK. This algorithm can be used as a backup attitude determination system.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.627-632
• /
• 2016

In this paper, we propose a new vision-based defect inspection system for the surface of hot slabs. To minimize the influence of self-emission from slab surfaces with high temperature, an optic method based on blue LED light and a blue pass filter is proposed. Because the slab surface is partially covered with scales, which are unavoidable oxidized substances caused during manufacturing, it is difficult to distinguish between vertical cracks and scale. In order to resolve this problem and to improve the detection performance, the use of a Gabor filter and dynamic programming are proposed. Finally, the effectiveness of the proposed method is shown by means of experiments conducted on images of hot slabs that were obtained from an actual slab production line.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1296-1305
• /
• 2019

To solve the problem of poor noise suppression capability and frequent loss of edge contour and detailed information in current fusion methods, an infrared and visible light image fusion method based on variational multiscale decomposition is proposed. Firstly, the fused images are separately processed through variational multiscale decomposition to obtain texture components and structural components. The method of guided filter is used to carry out the fusion of the texture components of the fused image. In the structural component fusion, a method is proposed to measure the fused weights with phase consistency, sharpness, and brightness comprehensive information. Finally, the texture components of the two images are fused. The structure components are added to obtain the final fused image. The experimental results show that the proposed method displays very good noise robustness, and it also helps realize better fusion quality.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1821-1826
• /
• 2009

Liquid crystal display (LCD) devices contain a colour filter which can visualise colour images by transmitting or absorbing light. Colour properties of LCD mainly depend on colour materials such as pigments and polymeric binders. In this paper, colour properties were studied to improve colour quality of LCD. Generally, the colour properties can be classified into three categories which are colour purity, brightness and contrast ratio. For this study, photo resists were prepared by treatment of pigments and synthesis of polymeric binder. The treated pigments were dispersed and formulated with additives for preparing a photo resist that could be used for manufacturing colour filters. As a result of what we studied, type, mixture ratio and concentration of pigments were very important to improve colour purity of LCD device.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1995-1997
• /
• 2007

In this paper we propose a wavelength-switchable fiber ring laser that employs a polarization-dependent fiber band stop filter. The fiber filter was fabricated by inscribing a long-period fiber grating on a high birefringent fiber. Dual-wavelength switching operation was accomplished by controlling the rotatable linear polarizer which rotated the polarization plane of the light circulating through the fiber laser cavity. The amplitude variation of both laser lines was measured to be less than 0.5 dB and the signal-to-amplified spontaneous emission ratio was more than 55 dB.