• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1244-1249
• /
• 2010

Comparisons of properties between skeletal ryanodine receptor 1 (sRyR1)-heterozygous-mutated and normal types of meat were carried out in pigs using PSE (pale, soft and exudative) meat found during the butchering process. All samples considered to be PSE meat showed irregular running and disorder of the muscle fibers and a wider inter-fiber space upon light microscopic observation. Electron microscopy revealed disintegration, twisting, and disorder of the myofibril arrangement and elimination of the Z line in PSE meat, compared with normal meat. Meat property tests demonstrated greater decreases in water holding capacity, moisture and sarcoplasmic protein, and higher $L^*$ values for the meat color index in PSE meat than in normal meat, but there were no differences in these factors between genetically normal and sRyR1-heterozygous PSE meat. On the other hand, higher $a^*$ and $b^*$ values were observed in sRyR1-heterozygous than in normal PSE meat, and similar alterations to the a* value were observed in terms of the amount of myoglobin and density of the 17-kDa protein band, corresponding to the molecular mass of myoglobin, on SDS-PAGE gels. These results suggest that sRyR1-heterozygous PSE pork contains much more myoglobin than genetically normal PSE meat.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.801-804
• /
• 2008

Fiber reinforced plastics (FRP) are light in weight, non-corrosive and exhibits high tensile strength. FRPs having superior material properties to corrosive steels have been widely replacing steel bars or tendons used in concrete structures as flexural reinforcements. Although current design guidelines for estimating shear strength of FRP concrete beam follow the format of conventional reinforced concrete design method, there are noticeable differences among the existing formulas in calculating the contributions of concrete to shear resistance. In this paper, the artificial neural network (ANN) technique is employed as an analytical alternative to existing methods for predicting shear capacity of FRP concrete beams. Influential factors on shear strength were identified through literature review and input in ANN and the ANN was trained for the target ultimate shear obtained from database. The results from ANN were compared with existing formulas for its accuracy. It was found that the developed ANN were more closely predicting the test data than those of the currently available predictive equations.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.2
• /
• pp.203-216
• /
• 1991

Nerve allografts as a bridge of regeneration is useful in the repair of peripheral nerve defect resulting from trauma, and leprosy. But immunological rejection and complicated scar formation is an unavoidable problem in the application of allogeneic nerves. This article is intended to study of the regeneration of allogeneic nerve grafts in rats with histopathologically, scanning electron microscopically. 24 adult male Sprague-Dawley rats were used as the experimental animals. A 2cm skin incision was made on the lateral aspects of limb, parallel to femur. Segments of sciatic nerve trunk taken from rats, 10mm was resected at the middle of the thigh, nerve graft was inserted between the ends of gaps with perineural and epineural suture method with 10-0 prolene. Obsrevation was made simultaneously at 3 day, 1, 2, 3, 4, 5, 6, 8 weeks after surgery. The results were as follows. 1. In light and electronic microscopic studies, marked degenerative change of the graft nerves were observed at 2 weeks after surgery. 2. After surgery, blood clot fromation was observed at 3 day, granualtion tissue formation was observed at 2 week, and fibrous tissue proliferation was observed at 3 week. 3. In change of nerve fiber, there were Wallerian degeneration at early stage, decrease in degeneration at 4 week but degeneration of myeline was continuded at 8 week. 4. At 4 week, schwann cells proliferate at its cut ends to join with the distal and proximal stump of the damaged nerve. 5. Fibrous scar tissues are formed at 2 weeks and increased progressively in 8 weeks, which was interrupted the regeneration of grafted nerve.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.407-418
• /
• 2003

It is necessary, in the light of the importance of long-term slope stability problem, to develop a simple method or tool which can figure out the possible failure surface resulting from weathering effect and other factors. The FBG(Fiber Bragg Crating) sensor system is used to estimate the correlations between the soil temperature and the slope behavior, and to find a failure surface in slopes effectively. This research is to seek for the correlation between the soil temperature distribution and the strain distribution of the reinforcing materials in an active zone by analyzing the data from the in-situ measurement so that the possible failure surface should be well defined based on the correlation. The zone of high temperature fluctuation can be regarded as one of the possible failure surface due to the weathering effect while the constant temperature depth of the ground, if exists, would not be relatively affected by the weathering process.

• International Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.17-27
• /
• 2008

Black garments can lose color, image, and be the main cause of color staining when washed with other laundry that can cause color contamination from interaction with other garments. To know the fiber-based dye fastness for colored garments, 4-5 pieces of various fibers of different fabrics were selected; cotton, linen, wool, silk, rayon, acetate, polyester, and nylon. To determine the colorfastness to washing and crocking, the black fabrics were washed with alkali and neutral detergents under the Laund-O-Meter method under the Crockmeter method. In an alkali detergent laundering conditions, most colored samples did not undergo color or light fastness. However, most of the stained fabrics slightly changed in K/S values while other samples underwent severe changes. With neutral detergent laundering, sample fabrics underwent less shrinking, and had less naps. The stained fabrics also underwent less change in K/S values. With time-repeatedly-washing the original sample went through colorfastness to lose color. In crocking fastness, most samples produced good to excellent results under dry conditions but produced relatively low crocking fastness under wet conditions. Natural fibers especially showed lower crocking fastness than artificial fibers. In conclusion, garments of the same color should be laundered together. The black garments that are washed using neutral detergents can decrease the amount of damage from color change. While it is the responsibility of garment producers to provide appropriate quality indications they should also provide adequate instructions for consumers to understand and appropriately cope with the quality indications in order to contribute to establishing a correct laundering method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.2
• /
• pp.127-133
• /
• 2013

In this paper, the study for the manufacture of the integrated composite wing is performed. The wing has a pivoting structure and high aspect ratio to increase lift drag ratio. The wing is designed with carbon fiber composite because the wing needs to be light and have sufficient strength and stiffness to satisfy structural design requirements. The number of structural members is decreased by part integration to reduce manufacturing cost and the wing is manufactured with the integrated molding process by an autoclave. The material properties are identified by the coupon tests and the structural strength and stiffness are verified through the component tests.

• Journal of the Korean Society of Costume
• /
• v.53 no.5
• /
• pp.79-95
• /
• 2003

The purpose of this study is firstly to survey the social and cultural background of 20th century and women´s status, and to identify what the ideal body is like and what the elements of outer garment and underwear are and the techniques to incarnate the ideal beauty. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. In 1960´s, ideal beauty was small bust, long legs, which showed extremely slim Mini-skirt look. Thinly or no padded brassiere were worn for small bust, and pants-style short panty girdles were popular as they used to wear pants frequently. Lycra replaced all the closures, bones, seams and gave freedom with light weight. In 1970´s, a natural human body without sex specific was in vogue. Therefore, the non-structural knits without a pad or lining or the shirts dress were widespread for a Natural look and the naturally molded brassiere or girdles were worn as the underwears. In 1980´s, the women with powerful muscle appear which emphasized liveliness and healthfulness. The body conscious represented by wide shoulder, plump breast, accented waist, small hips, and long legs has been embodied. Outer garments emphasized women power and healthy beauty with Power suit and Form-fitting style, and underwears made the breast plump with padded brassiere and emphasized waist and hips with waspie. In 1990´s, ideal beauty was slim body with big bust and the outer garments emphasized body line of women with Hourglass silhouette. Push-up bra which emphasizes the valley of breast and supports the breast upward and the control tights for slim waist, flat abdomen, small hips, and long and slim legs have been useful as underwears. Multi-functional micro-fiber has been ideal for sculpting women body.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.113-119
• /
• 1994

We fabricated and characterized RWG-DFB-LDs emitting at $1.3\mu\textrm{m}$ wavelength. For fabrication of the laser diode, inteference fringe of optical beams was used for grating formation and epi layers were grown by LPE. The fablicated RWG-DFB-LD operated in a single longitudinal mode with more than 30 dB SMSR at 1296.5 nm emitting wavelength and its threshold current was 67 mA. Coupling coefficient (K) was estimated as $40cm^{-1}$ by means of stop-band measurement. Finally, we show that the RWG-DFB-LD fabricated in this experiment can be applicable as light source of 2.5 Gbps optical communication system from the fact that the small signal response of the RWG-DFB-LD rated up to 1.99 GHz at pre-bias level of $1.2 I_{th}$..

• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.125-135
• /
• 2011

To obtain a lower story height with a long span and better fire resistance, a new composite floor system using GFRP (glass-fiber-reinforced plastics) was proposed. This floor system consists of asymmetric steel with a web opening, a hollow core ball, concrete, and GFRP. To evaluate the flexural performance of the new composite floor system, an experiment was conducted. The test parameters were the presence of GFRP, the void ratio in relation to the hollow core balls, and the web opening. The test results showed that the resistance and stiffness of the specimen with GFRP were 10% higher than those of the reference specimen, and that fully composite action was accomplished up to the yielding point. After the attainment of the yield strength, the ductility of the specimen was reduced due to the stress concentration around the web openings. The slip between the concrete and steel beam, however, was small. Thus, in the design of the proposed new floor systems, it is desirable that the calculated resistance be reduced by 15%, for safety.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.34.1-34.1
• /
• 2017

The GMT-Consortium Large Earth Finder (G-CLEF) is the very first light instrument of the Giant Magellan Telescope (GMT). The instrument is a fiber feed, optical band echelle spectrograph that is capable of extremely precise radial velocity measurement, and has been being developed through the international consortium consisted of five astronomical institutes including Smithsonian Astrophysical Observatory (SAO), Observatories of the Carnegie Institution of Washington (OCIW), and Korea Astronomy and Space Science Institute (KASI). The Preliminary Design Review (PDR) for the G-CLEF was held in Cambridge, Massachusetts in April 2015. It is scheduled to have Critical Design Review (CDR) in March 2018. Flexure Control Camera (FCC) is one of the KASI's major contributions to the G-CLEF project. In this presentation, we describe the current critical design status, and structural and thermo-elastic analyses results on the G-CLEF FCC.