• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.194-199
• /
• 2014

PURPOSE. This study evaluated the depth of cure of resin composite cured by light through a translucent fiber post. MATERIALS AND METHODS. The opaque plastic tubes in various lengths of 2, 4, 6, 8, 10, 12, 14 mm. were filled with resin composite in which two different translucent fiber posts were inserted into the center and photo-polymerized for 40 seconds. The degree of conversion of the cured composite at bottom surface were examined using Fourier transform infrared attenuated total reflection spectrometer (FTIR/ATR) at 0.1, 0.5 and 1.0 mm apart from the post surface. RESULTS. The degree of conversion of the 0.1 mm, 0.5 mm, 1.0 mm apart from the post surface was highest at the 2 mm level and continuously decreased when the distance from the light source was increased and drastically decreased when the depth from the top of the post was greater than 4-6 mm. For each level, the highest degree of conversion was at 0.1 mm from the post surface and decreased continuously when the distance apart from the post surface was increased. CONCLUSION. The quantity of light transmission depends on the type of post and the light transmission capability of the post, especially after 4-6 mm depth and the area further apart from the post surface, are insufficient for clinical light activation of resin composite.

• 생물환경조절학회지
• /
• 제29권2호
• /
• pp.105-109
• /
• 2020

본 연구는 태양광 기반으로 인공광 병렬 광공급 시스템을 개발하고 상추 재배효과를 구명하기 위하여 수행하였다. 태양광 기반으로 인공광원을 공급하는 장치는 광원 공급부, 전원공급부, 시스템 계측 및 제어부로 구성하였다. 광원공급부는 태양광 전송장치(광파이버)와 LED 램프(인공광)로 구성하였고, 태양광 전송장치는 광 전송률이 우수한 석영재질의 광섬유(Optical fiber)로 제작되었으며, 인공광은 LED 중 White 램프를 사용하였다. 전원 공급부는 누전 차단기, SMPS, LED 제어기 및 릴레이로 구성하였다. 시스템계측 및 제어부는 터치스크린과 지그비(ZigBee) 통신모듈, 광량센서로 구성하였다. 구성한 장치의 성능시험 결과 광량센서로 측정된 강도가 200μmol·m^-2·s^-1 이하가 되면 자동적으로 LED 램프가 작동되어 보광하는 것을 확인하였다. 또한 본 장치를 활용하여 상추를 재배한 결과, 엽장, 뿌리길이, 엽록소 함량 및 지하부 생체중이 LED 처리보다 큰 것으로 나타났다. 따라서본 장치는 화석연료 고갈 등으로 전기 사용에 제한이 올때 폐쇄형 식물공장 같은 시설에서 작물을 재배할 수 있을 것으로 판단된다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.229-232
• /
• 2002

In this paper, we described the laboratory layout of the optical CT in connection with the measurement of large current for the GIS. The aim of this study is the development and application of optical CT based on Faraday effect. It was used He-Ne laser for light source (633nm) and was used PIN-Photodiode for light receiver. The laser source passes through optical fiber in single mode. We used the polarizer to polarize the light source and the beam splitter to divide the output light, and the optical fiber is connected for the measuring the angle polarized in the magnetic field.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.77-82
• /
• 2008

Strain-gauges have been dominantly used to measure strain at various points on a rotor, however, either a slip ring or telemetry has to be used to send sensor signals to data acquisition instruments at stationary side. Both slip ring and telemetry have numerous inherent problems which force severe limitations in real applications. This paper introduces a new rotor condition monitoring system using FBG(Fiber Bragg Grating) sensors and a rotary optical coupler. A single optical fiber with many FBG sensors is installed on the rotor and an optical dynamic interrogator is installed at stationary side. The sensor signal connection between rotating part and stationary part is made by the rotary optical coupling method which makes use of light's unique characteristic-light travels through space. Broad band light source from the interrogator travels to the optical fiber on the rotor and reflected FBG sensor signals travel back to the optical fiber on stationary side and are connected to the interrogator. Rotary optical coupler's insertion loss change due to rotation is compensated by using a reference sensor installed at the center of the rotor. The proposed system's performance has been successfully demonstrated by accurately measuring strains at 5 points on a blade rotating at high speed.

• 센서학회지
• /
• 제15권1호
• /
• pp.40-46
• /
• 2006

This paper presents a novel fiber optic accelerometer system for monitoring vibration of large-size structures. The system is composed of one (or multiple) sensor head, a light control unit and a signal processing unit. The sensing mechanism of the sensor head is based on a novel integration of the moire fringe phenomenon with fiber optics to achieve a robust performance in addition to its immunity to EM interference, easy cabling, and low cost. In this paper, a prototype of the fiber optic accelerometer system has been developed successfully. A low-cost light control unit has been developed to drive the system's optic and electronic components. A unique algorithm has also been developed to derive the sensor's acceleration from the raw signals of the light control unit; it is implemented via a separate signal processing unit. Finally, the shaking table tests successfully demonstrate the performance and the potential of the moire fringe fiber optic sensor system to monitor the health of civil infrastructures.

• Journal of the Optical Society of Korea
• /
• 제7권1호
• /
• pp.20-27
• /
• 2003

A theoretical presentation of evanescent coupling is offered with respect to the refractive indexes between a side-polished optical fiber and an infinitely planar waveguide with a conductor cladding (PWGCC). The PWG is suspended at a constant distance from an unclad fiber core and attached with the perfect conductor (PEC) on one side. The behavior of the distributed couple. is examined using a coupled mode model, which takes account of the two dimensions of the waveguide configuration. The coupling and propagation of light were found to depend on both the relationship between the refractive index values of each structure and the configuration of the side-polished fiber used in the PWGCC. The spreading of light in the unconfined direction of the PWGCC is described in terms of a simple geometrical interpretation of the synchronization condition that is in agreement with a previous investigation of the problem based on the coupled-mode theory (CMT). The power of the light propagation in the fiber decreased exponentially along the fiber axis as it was transferred to the PWGCC, where it was carried away.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.399-405
• /
• 2016

최근 많은 장점으로 기존 전기식 센서를 대체하여 그 적용 영역을 빠르게 넓혀가고 있는 광섬유 센서는 센서부에서 계측기 사이의 신호 전달을 위해 광 어댑터와 광 점퍼 코드와 같은 광소자를 사용하게 된다. 광 어댑터를 이용하여 신호 전달을 하는 경우 단면이 서로 맞닿게 되어 이물질에 의해 코어 부분에 손상이 발생할 수 있으며, 이는 광 손실 및 광 접속 불능을 유발할 수 있다. 따라서, 본 연구에서는 지속적인 유지보수를 필요로 하는 문제들을 근원적으로 해결할 수 있는 대안으로 비접촉식 광섬유 점퍼 코드를 개발하였으며 그 전송 성능을 평가하였다. 시험 결과, 기존의 접촉식 광 점퍼 코드는 2 mm의 간극에서 광 신호 전송이 불가능한데 반해 비접촉식 광 점퍼 코드의 경우 초기 광 손실은 상대적으로 크지만 간극이 증가하더라도 약 7 mm 정도까지 안정적으로 신호 전송이 가능하였다. 따라서, 패치 코드가 광센서 간 신호 전송을 위한 케이블임을 고려할 때 외부의 환경적 요인에 대해 더 우수한 신호 안정성을 가진 비접촉식 패치 코드가 접촉식 패치 코드에 비해 현장 적용성이 더 뛰어남을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.501-502
• /
• 2010

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.61-65
• /
• 2008

A 4-story reinforced concrete structure built above an underground parking garage shows some slab deflections, and the deflections of the concrete floor slabs are proposed to be alleviated by the application of light-weight topping material in conjunction with localized strengthening of the slabs. The application of light-weight concrete topping on the existing slab has been simulated and its performance to anticipated loads has been analyzed. The application of light-weight topping material imposes additional weight on the exiting floor slabs. This added weight on the existing slabs causes over-stressing of the slabs. This over-stressing can be alleviated by enhancing the load carrying capacity of the existing slabs. Additional load carrying capacity in the existing slabs can be developed by localized strengthening of the slabs utilizing techniques such as the application of fiber-reinforced composites on the bottom surface of the slabs, and application of fiber-reinforced composites adequately complements the capacity of the existing slabs to bear the additional load imposed by light-weight leveling material. Additional moments in the beam and columns induced by the application of the light-weight topping material were tabulated and compared with capacity. The moment D/C ratios of the beam and columns are well the range of acceptable limits, and the beam and columns are not overstressed by the application of the surcharge.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.147-148
• /
• 2009

We have fabricated a down tapered polymer tip on optical fiber end-face by a guided UV light. One side of fiber was aligned with a mercury-xenon lamp and another was put into UV curable polymer. A shape of tip was controlled by adjusting an irradiance of lamp and time of exposure. A bending effect also affects the result. Optical characteristic was achieved preliminarily with solution of minute particles.