• 한국광학회지
• /
• 제16권6호
• /
• pp.481-484
• /
• 2005

빛의 양자역학적 성질인 얽힘(entanglement)을 이용한 양자 고스트 이미징(quantum ghost imaging)은 고전적인 동시계수 측정(classical coincidence measurement)에 의해서도 정성적으로 재현됨이 알려져 있다[1,2]. 본 실험에서는 진행방향에서 고전적인 상관관계를 가지는 빛을 이용하여 고전 동시계수 이미징(classical coincidence imaging) 실험을 수행하여 양자역학적 얽힘 상태에서 볼 수 있는 현상들을 관측하고 고스트 이미지가 나오는 원리를 분석하였다. 고전적인 상관관계를 가지는 광원은 아르곤이온 레이저에서 나오는 빛의 경로를 스피커에 부착되어 회전하는 거울에 반사시켜 진행방향에 대해 상관관계를 가지도록 만들어 사용하였다.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.37-46
• /
• 2016

The difference between definition time of GPS (Global Positioning System) position data and actual display time of car positions on a map could reduce the accuracy of car positions displayed in PND (Portable Navigation Device)-type CNS (Car Navigation System). Due to the time difference, the position of the car displayed on the map is not its current position, so an improved method to fix these problems is required. It is expected that a method that uses predicted future positionsto compensate for the delay caused by processing and display of the received GPS signals could mitigate these problems. Therefore, in this study an analysis was conducted to correct late processing problems of map positions by mapmatching using a Kalman filter with only GPS position data and a RRF (Road Reduction Filter) technique in a light-weight CNS. The effects on routing services are examined by analyzing differences that are decomposed into along and across the road elements relative to the direction of advancing car. The results indicate that it is possible to improve the positional accuracy in the along-the-road direction of a light-weight CNS device that uses only GPS position data, by applying a Kalman filter and RRF.

• 한국유체기계학회 논문집
• /
• 제10권6호
• /
• pp.50-56
• /
• 2007

In this study, we have performed some experimental works on the effects of variation of low, middle and high turbidity for understanding of optical characteristics which is very important factor for the turbidity measurement. The various output frequencies were obtained by the experimental apparatus which consist of detectors, a light source, a frequency counter and so on. From the result of analysis of these frequencies, Firstly, The difference of signal value for each degrees of low turbidity was the smallest of three scopes around the Nephelometric position. Second, the characteristics of each degrees of middle turbidity was proved that signal values of all degrees were larger those of low turbidity but the difference of each signal value of the forward direction was smaller than that of the backward direction. Third, the characteristics of each degrees of high turbidity was proved that though similar to the characteristics of middle turbidity, each signal value of all degrees was larger and the difference of each signal value of all degrees was smaller than those of low and middle turbidity

• Wind and Structures
• /
• 제39권2호
• /
• pp.85-100
• /
• 2024

In light of extreme value distribution probability, an improved prediction method of the Recurrence Period Wind Speed (RPWS) is constructed considering wind direction, with the Equivalent Independent Wind Direction Number (EIWDN) introduced as a parameter variable. Firstly, taking the RPWS prediction of Beijing city as an example, the traditional Cook method is used to predict the RPWS of each wind direction based on the measured wind speed data in Beijing area. On basis of the results, the empirical formulae to determine the parameter variables are fitted to construct an improved expression of the non-exceedance probability of the RPWS. In this process, the statistical model of the optimal threshold is established, and thus the independent wind speed samples exceeding the threshold are extracted and fitted to follow the Generalized Pareto Distribution (GPD) model for analysis. In addition, the Extreme Value Type I (EVT I) distribution model is used to predict and analyze the RPWS. To verify its wide applicability, the improved method is further used in cities like Jinan, Nanjing, Wuxi, Shanghai and Shenzhen to predict and analyze the RPWS of each wind direction, and the prediction results are compared against those gained via the traditional Cook method and the whole direction. Results show that the 50-year RPWS results predicted by the improved method are basically consistent with those predicted by the traditional method, and the RPWS prediction values of most wind directions are within the envelope range of the whole wind direction prediction value. Compared with the traditional method, the improved method can readily predict the RPWS under different return periods through empirical formulae, and avoid the repeated operation process and some assumptions in the traditional Cook method, and then improve the efficiency of prediction. In addition, the improved RPWS prediction results corresponding to the GPD model are slightly larger than those of the EVT I distribution model.

• 한국작물학회지
• /
• 제30권1호
• /
• pp.76-83
• /
• 1985

옥수수의 밀도를 소(60cm$\times$40cm), 적(60cm$\times$24cm), 밀식(60cm$\times$16cm)으로 심고 초형처리로서 자연초형(남북이랑), 동서향교정(남북이랑), 동서향교정 및 엽각조정(남북이랑), 남북향교정(동서이랑)을 실시하였다. 초형교정은 엽출현이 완료된 뒤 철사가를 옥수수군락에 설치하고 옥수수잎들은 동서향이 되록 유인하여 고정시키고, 엽각조정은 수평에서 80$^{\circ}$가 되도록 직입화시켰다. 옥수수의 자연초형은 남북이랑이든 동서이랑이든 관계없이 모든 방위로 고루 분포하였고 약간의 남북향 경향을 보였으나 현저하지 않았고 엽각은 직입~중간엽형의 분포를 나타내었다. 군락내부에서 광투과는 초형을 동서향으로 교정하거나 엽각을 직립화시킴에 따라 초고의 중간높이에서 일평균 광도가 5~10% 가량 향상되었다. 반면 남북향 초형교정에서는 2~10% 정도 낮아졌다. 황숙기의 건물중집적은 밀식시 동서향초형이 자연초형 보다 6% 증가하였으나 남북향초형은 차이가 없었다. 완숙기의 종실수량에서는 동서향 초형교정은 3~11% 증가하였으나, 엽각조정까지 하였을 때에는 소식에서 10% 감소, 적. 밀식에서는 10%, 3%씩 각각 대조구보다 증가하였다. 반면 남북향초형은 차이가 없거나 감수로 나타난다. 초형을 태양의 방위와 고도를 고려하여 변형한다면 밀식에서도 일사광의 군낙내부로 침투를 용이하게 하며 증수할 수 있음이 확인되었다.

• 한국육종학회지
• /
• 제41권4호
• /
• pp.451-455
• /
• 2009

참나리(Lilium lancifolium)는 우리나라 자생나리로 생육이 왕성하고 후자리움에 내성이 있으며 주아를 형성하는 등 많은 장점을 가진다. 이를 자방친으로 하여 Asiatic hybrid "Dreamland"의 상향이고 흑갈색의 반점이 없는 형질을 이입시키기 위해 교배를 수행하였다. 참나리와 "Dreamland"의 화분발아율은 각각 30과 60%이었다. 이들 후대의 개화일자별 화분의 평균 발아율은 25-57%로 양친의 중간에 분포하였다. 개화는 정식 후 124일째 가장 많았다. 엽형지수는 5 이상인 식물체가 약 99%로 나타나 자방친인 참나리의 영향이 우세하였다. 화색은 4가지로 분리되었다. Orange와 light orange가 각각 51.5와 44.2%로 대부분을 차지하여 자방친의 영향이 우세하였다. 그리고 양친의 중간색인 orange yellow와 light yellow orange는 각각 3.1과 1.2%로 분리되었다. 꽃잎의 반점은 1개체를 제외한 나머지 모든 개체에서 관찰되었다. 개화 방향은 상향, 측향 및 하향 3가지로 분리되었다. 측향 즉, 자방친과 화분친의 중간형이 73% 이었다. 주아는 49.4% 형성되었으며 그 중 최대 25개까지 착생되었다. 평균 주아수는 5개이었다.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.145-152
• /
• 1999

This paper presents the principle and experimental results of a non-contact surface roughness measurement by means of screen projected pattern of lase beam reflected from a polished surface. In the reflected laser beam pattern especially from a fine surface like ground or polished one, light intensity varies from the center fo the image to its boundary as the Gaussian distribution. The standard deviation of a light intensity distribution is assumed to be a good non-contact estimator for measuring the surface roughnes, because the light reflectivity is known to be well related with the surface roughness. This method doesn't need to discriminate between the specularly reflected light and the diffusely reflected one, whereas the scattered laser intensity method must do. Nor it needs to adjust the change of light intensity caused by environmental lights or specimen materials. Reflected laser beam pattern narrowly spreads out in the vertical direction to tiny scratches on the polished surface due to abrasives. The deeper the scratch the more the dispersion, which means the rougher surface. The standard deviation of the pattern is nearly in proportion to the surface roughness. Measurement errors by this method are shown to be below 10 percent compared with those obtained by a common contact method. The inclination of measuring unit from the normal axis causes the measurement errors up to 10 percent for an angle of 4 degree. Therefore the proposed method can be used as an on-the-machine quick roughness estimator within 10 percent measurement error.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.153-153
• /
• 2010

Recently, to develop GaN-based light-emitting diodes (LEDs) with better performances, various approaches have been suggested by many research groups. In particular, using the patterned sapphire substrate technique has shown the improvement in both internal quantum efficiency and light extraction properties of GaN-based LEDs. In this paper, we discuss the influences of the direction of the hexagonal-structure arrays of lens-shaped patterns (HSAPs) formed on sapphire substrates on the crystal, optical, and electrical properties of InGaN/GaN multi-quantum-well (MQW) LEDs. The basic direction of the HSAPs is normal (HSAPN) with respect to the primary flat zone of a c-plane sapphire substrate. Another HSAP tilted by 30o (HSAP30) from the HSAPN structure was used to investigate the effects of the pattern direction. The full width at half maximums (FWHMs) of the double-crystal x-ray diffraction (DCXRD) spectrum for the (0002) and (1-102) planes of the HSAPN are 320.4 and 381.6 arcsecs., respectively, which are relatively narrower compared to those of the HSP30. The photoluminescence intensity for the HSAPN structure was ~1.2 times stronger than that for the HSAP30. From the electroluminescence (EL) measurements, the intensity for both structures are almost similar. In addition, the effects of the area of the individual lens pattern consisting of the hexagonal-structure arrays are discussed using the concept of the planar area fraction (PAF) defined as the following equation; PAF = [1-(patterns area/total unit areas)] For the relatively small PAF region up to 0.494, the influences of the HSAP direction on the LED characteristics were significant. However, the direction effects of the HSAP became small with increasing the PAF.

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.184-188
• /
• 2015

There is a need for light weight and high stiffness characteristics in the building structure as well as aircraft and cars. So fiber reinforced plastic with the addition of reinforcing agent such as glass fiber, carbon fiber, aramid fiber is utilized in this regard. In this study, mechanical strength, flow property and part shrinkage of glass fiber and carbon fiber reinforced PA6 were examined according to reinforcement content such as 10%, 20%, and 30%, and reinforcement type. The mechanical property was measured by a tensile test with specimen fabricated by injection molding and the flow property was measured by spiral test. In addition, we measured the part shrinkage of fiber reinforced PA6 that affects part quality. As glass fiber content increases, mechanical property increased by 75.4 to 182%, and flow property decreased by 18.9 to 39.5%. And part shrinkage decreased by 52.9 to 60.8% in the flow direction, and decreased by 48.2 to 58.1% in the perpendicular to the flow direction. As carbon fiber content increases, mechanical property increased by 180 to 276%, flow property decreased by 26.8 to 42.8%, and part shrinkage decreased by 65.0 to 71.8% and 69.5 to 72.7% in the flow direction and the direction perpendicular to the flow respectively.

• 대한공업교육학회지
• /
• 제31권1호
• /
• pp.185-199
• /
• 2006

본 연구에서는 구조물이 횡방향으로 음압을 받을 경우 이를 감지하기 위하여 Fabry-Perot형 광섬유 배열 센서를 제작하고 실험하였다. 이는 한 개의 광원으로 두 개의 센서가 병렬로 연결되고 센서의 출력신호를 보기 위한 별도의 신호처리기가 필요 없는 구조이다. 횡방향 음압을 임의의 음원 주파수인 100Hz, 200Hz 및 655Hz의 주파수를 무지향성 스피커에 인가하였으며 $60cm{\times}60cm{\times}60cm$의 격자 구조물에 부착된 두 개의 배열 센서가 잡은 신호를 분석하였다. 시간 영역에서 두 개의 센서 신호는 진폭에 약간의 차이는 있으나 음원 주파수를 잘 감지함을 확인 하였다. 센서가 실제로 양단이 지지된 구조의 배열 센서를 모델링하고 그 해를 실험결과와 비교하였다. 2kHz의 음원을 배열 센서에 인가하였더니 이론 해석과 비교적 잘 일치하는 측정 결과를 얻었다.