• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.145-148
• /
• 2008

The objective of this study is to analyze and to shed light on the evolutions of factors with the wall structure and their relations with production mechanisms of urban form. this study based on followings; literature review of existing study and setting up of examination factors, analytical review of each wall's current situation and problems, analytical review of each wall's urban regeneration. The significance of this study is in that the study use a contemporary map showing the actual spatial arrangement in the period, instead of using the historical map. We understood the planning methods to interpret the site's historical urban trace and memory. Based on the results, this study presented the solution for the placeless and potential energy.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.54-67
• /
• 1996

Micromorphology of the vessel wall sculptures such as perforation plate, inter-vessel pits, vessel-ray pits, vessel-parenchyma pits, vestured pits, spiral thickening, and warts was observed in 78 species(45 genera, 25 families) of Korean hardwoods using a scanning electron microscopy. The SEM observation revealed the micromorphology of vessel wall sculptures which have not yet been described, and have confirmed findings already established at the light microscopical level.

• ETRI Journal
• /
• 제43권4호
• /
• pp.594-602
• /
• 2021

Recently, quantitative and repetitive inspections of the old urban area were conducted because many structures exceed their designed lifetime. The health of a building can be validated from the condition of the outer wall, while the slant angle of the wall widely serves as an indicator of urban regeneration projects. Mostly, the inspector directly measures the inclination of the wall or partially uses 3D point measurements using a static light detection and ranging (LiDAR). These approaches are costly, time-consuming, and only limited space can be measured. Therefore, we propose a mobile mapping system and automatic slant map generation algorithm, configured to capture urban environments online. Additionally, we use the LiDAR-inertial mapping algorithm to construct raw point clouds with gravity information. The proposed method extracts walls from raw point clouds and measures the slant angle of walls accurately. The generated slant angle map is evaluated in indoor and outdoor environments, and the accuracy is compared with real tiltmeter measurements.

• 소성∙가공
• /
• 제17권8호
• /
• pp.657-661
• /
• 2008

Recently, products of electronic industry and related parts are required to have the thickness thinner and thinner to reduce the part weight. To go with this trend, LGP(light guide plate) of LCD-BLU(Liquid Crystal Display-Back Light Unit: It is one of kernel parts of LCD) for cell phone has the thickness of ${\sim}0.3mm$ and the battery case of cell phone has ${\sim}0.25mm$. Accordingly, high speed injection molding is required to mold products which have thinner parts. To achieve high speed injection and proper control of hydraulic unit, various design was applied to conventional injection unit. In the present paper, we concentrated on the molding stability of hydro-mechanical high speed injection machine to make an LGP of 0.3mm thickness.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.405-413
• /
• 2010

A hybrid post and beam shear wall system with structural insulation panel (SIP) infill was developed as a part of a green home 'Han-green' project through post and beam construction for contemporary life style. This project is on-going at the Korea Forest Research Institute to develop a new building system which improves Korean traditional wet-type building system and stimulates industrialized wood construction practice with pre-cut system. Compared to the traditional wet-type infill wall components, the hybrid wall system has benefits, such as, higher structural capacity, better thermal insulation performance, and shorter construction term due to the dry-type construction. To build up the hybrid wall system, in previous, SIP infill wall components can be manufactured at factory, and then inserted and nailed with helically threaded nails into the post and beam members at site. Shear performance of the hybrid wall system was evaluated through horizontal shear tests. The SIP hybrid wall system showed higher maximum shear strength, initial stiffness, ductility, yield strength, specified strength, and the specified allowable strength than those of post and beam with light-frame wall system. In addition to this, the hybrid wall system can provide speedy construction and structural and functional advantages including energy efficiency in the building system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권3호
• /
• pp.34-42
• /
• 1994

The present study is aimed to improve the PIV performance by suggesting a two-frame particle identification technique and by introducing estimation method of wall pressure distribution from the velocity data. Adopted image processing system consists of one commercial image board slit into a personal computer, 2-D sheet light generator, flow picture recording apparatus and related particle identification software. A revised particle tracking method essential to PIV performance is obtained by particle centroid correlation pairing (CCP) and its effectiveness is ascertained by comparison with multi-frame identification.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 추계학술발표대회 논문집
• /
• pp.157-158
• /
• 2007

This is an interior design for a furniture & lighting design exhibition. The concept of design is to secure the smooth flow planning of an audience and effective direction of an exhibit Design content include 1) installation(passage of light) to guide an audience from entrance to right side of the exhibition space to prohibit the flow dispersion and keep smooth continual circulation flow plan 2)image-wall to introduce exhibition 3)installation to help the global understanding of exhibit 4)exhibition stand design considering proper height of audience's eye.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.1-7
• /
• 2004

본 실험은 구두매장 벽면 진열장을 연구대상으로 하여 바람직한 벽면조명환경을 제시하고자 실험을 실시하였다. 그 결과, "차별성"이 요구되는 벽면 조명은 광원 종류를 다양하게 하고 전반조명과 중점조명의 조도 비를 크게 하거나, 전반조명과 중점조명의 조도 비는 작으나 전체조도를 높게 하는 것이 효과적이었다. 또한 "명시성"이나 "정서성"이 요구되는 벽면 조명은 광원의 종류를 다양하게 하고 전반조명과 중점조명의 조도 비가 작으면서 전체조도를 높이는 것이 좋은 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.713-727
• /
• 2018

Thin-walled mental tubes under lateral crushing are desirable and reliable energy absorbers against impact or blast loads. However, the early formations of plastic hinges in the thin cylindrical wall limit the energy absorption performance. This study investigates the energy absorption performance of a simple, light and efficient energy absorber called the ring stiffened tube. Due to the increase of section modulus of tube wall and the restraining effect of the T-stiffener flange, key energy absorption parameters (peak crushing force, energy absorption and specific energy absorption) have been significantly improved against the empty tube. Its potential application in the offshore blast wall design has also been investigated. It is proposed to replace the blast wall endplates at the supports with the energy absorption devices that are made up of the ring stiffened tubes and springs. An analytical model based on beam vibration theory and virtual work theory, in which the boundary conditions at each support are simplified as a translational spring and a rotational spring, has been developed to evaluate the blast mitigation effect of the proposed design scheme. Finite element method has been applied to validate the analytical model. Comparisons of key design criterions such as panel deflection and energy absorption against the traditional design demonstrate the effectiveness of the proposed design in blast alleviation.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.173-182
• /
• 1995

The purpose of this study was to evaluate the adaptability of light-cured glass ionomer cement to cavity walls. Class V cavities were prepared on the labial surfaces of extracted bovine incisor teeth. The cavities were restored with Fuji II as self-cured glass ionomer cement and Fuji II LC, Vitremer as light-cured glass ionomer cement. Fluorescent markers (fluoreceine and rhodamin B) were incorperated into liquid and primer for a better image of microscopic observation. Restored teeth were sectioned by longitudinal and labiolingual direction. The adaptability at the tooth-restoration interface was assessed incisally, axially and cervically by confocal scanning laser microscope. Following results were obtained : 1. Chemical-cured glass iomomer cement restoration showed close adaptation on the all of the cavity walls, but, cracks formed within the cement. 2. Light-cured glass ionomer cement restoration was well adapted to the cavity walls, but showed crack in the cement adjacent to axial dentinal wall. 3. There' was no significant difference in adaptability between two light-cured glass ionomer cement restorations.