• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.698-705
• /
• 2017

Environmental impact of a mobile phone charger containing recycled plastic was quantified using LCA and the environmental benefits from the use of recycled and virgin plastic were compared. The assessment considers potential environmental impacts across the whole life cycle of the charger including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages and quantified six environmental impact categories; Abiotic depletion; Acidification; Eutrophication; Global warming; Ozone layer depletion; and Photochemical oxidants creation. The study showed that the environmental impacts of the use stage accounted for 94.4% and 70% in the resource depletion and global warming impact categories, respectively, and the environmental impacts of the pre - manufacturing stage accounted for more than 98% in the other impact categories. The main cause of the environmental impacts in the use stage was electricity consumed by the charger. The main cause in the pre-manufacturing stage was PBA (Printed Board Assembly) and external case manufacturing. In order to quantify the environmental benefits of recycled PC (Polycarbonate) in the exterior case, the environmental impacts of 1 kg production of recycled PC and virgin PC were evaluated. The environmental impact on the abiotic depletion of the recycled PC is estimated to be 30% compared to the virgin PC, and the impacts on the other impact categories of the recycled PC were less than 5% of the virgin plastic. Sensitivity analysis was performed for 12 items including site data and assumptions made. The sensitivity of each item was less than 10%. The results of this study confirm that designing compact and light PBA, improving charging efficiency, and use of recycled plastic are important design factors to reduce the environmental impact of a charger.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.101-106
• /
• 2014

The glass/Ta(5.8 nm)/NiFe(5 nm)/Cu(2.3 nm)/NiFe(3 nm)/IrMn(12 nm)/Ta(5.8 nm) GMR-SV (giantmagneto-resistance-spin valve) multilayer structure films with a magnetoresistance ratio (MR) of 5.0 % and a magnetic sensitivity (MS) of 1.5%/Oe was deposited by dc magnetron sputtering method. Also, GMR-SV device having a width of $7{\mu}m{\sim}8{\mu}m$ similar to the diameter of RBC (red blood cell) was fabricated by the light lithography process. When RBCs coupled with several magnetic beads with a diameter of $1{\mu}m$ dropped upon the GMR-SV device having MR = 1.06% and MS = 0.3 %/Oe, there is observed the variation of about included of a resistance value of ${\Delta}R=0.4{\Omega}$ and ${\Delta}MR=0.15%$ around a external magnetic field of -0.6 Oe. From these results, the GMR-SV device having the width magnitude of a few micron size can be applied as the biosensor for the analysis of a new magnetic property of hemoglobin inside of RBC combined to magnetic beads.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.24-32
• /
• 2008

The ultimate purpose of the study is to develop a discomfort glare forecasting formula that can be practically used in Korea in order to effectively forecast discomfort glare considering the optical characteristics of the Koreans. The study was to examine the relations between discomfort glare and the variables such as luminance, background luminance, solid angle, luminous area and louver. To this end, experiments were conducted in a mock-up office that emulates the lighting environment of an ordinary office. The study was conducted by four steps as follow. First, previous studies on discomfort glare rating to define and rate discomfort glare were analyzed and modified to be applied to the experiments of this study. Second, experiment variables, variable scope, evaluation objects and evaluation points were determined after review on existing discomfort glare evaluation experimental formulas. Third, experiments were conducted in a mock-up office to be able to control variables. Finally, sensitivity of experiment variables were analyzed through examination of the relation between discomfort glare and the variables such as luminance, solid angle, louver, luminous area and subject's position. The result showed that the most influential variables on discomfort glare of an artificial light source is luminance and louver, luminous area and subject's position(solid angle) followed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.119-125
• /
• 1990

This paper describes fiber optic voltage sensor using EOM-BSO (Electro-Optic Modulator-Bismuth Silicon Oxcide). Transceiver has an electical/optical converter and an optical/electrical converter which consist of light emitting diode, PIN-PD, and electronic circuits. Multimode fiber cable of $100/140{\mu}m$ core/clad diameter is used for connecting the transceiver to fiber cable and fiber optic voltage sensor. Before our experiments, by applying the Maxwell equations and wave equations, We derive matrix equation on wave propagation in the BSO single crystal. And also we derive optimal equation on intensity modulation arising through an analyzer. According to experi-mental results, fiber optic voltage sensor has maximum $2.5{\%}$ error within the applied AC voltage of 800V. As the applied voltage increases, saturation values of voltage sensor also increase. This phenomenon is caused by optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optic voltage sensor in the temperature range from$-20^{\circ}C\to\60^{\circ}C$ are measured within ${\pm}0.6{\%}$. And frequency characteristics of the voltage sensor has good frequency characteristics from DC to 100kHz.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.4
• /
• pp.132-140
• /
• 2008

Two different sensitivity classes of black cherry (Prunus serotina) under the natural growing environmental conditions were assessed adjacent to Air Monitoring Station located at Horton research center in Giles County, Virginia, USA. Ambient ozone concentrations, leaf gas exchange, and visible foliar injury were measured on-site during the growing seasons of 2000, 2001, and 2002. Ambient ozone exposures were sufficient to induce typical foliar visible injury corresponding with the reduction in photosynthetic activities only in sensitive black cherry. There were positive correlations between increasing cumulative ozone concentration and percent reduction in maximum net photosynthetic rates ($Pn_{MAX}$) under saturating light conditions and in quantum yield for carbon reduction (${\Phi}CO_2$) of sensitive black cherry compared to tolerant black cherry. There was a negative correlation between chlorophyll content and percent leaf injury in sensitive black cherry. Furthermore, $Pn_{MAX}$ was inversely related to percent leaf injury.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.1 s.114
• /
• pp.21-36
• /
• 2006

This study was undertaken to analyze the effects of pavement thermal properties and water retention characteristics on the surface temperature of the gray permeable cement concrete pavement during the summer. Following is a summary of major results. 1) The hourly surface temperature of pavement could be well predicted with a heat transfer model program that incorporated the input data of major meteorological variables including solar radiation, atmospheric temperature, dew point, wind velocity, cloudiness and the evaporation rate of the pavements predicted by the time domain reflectometry (TDR) method. 2) When the albedo was changed to 0.5 from an arbitrary starting condition of 0.3, holding other variables constant, the peak surface temperature of the pavement dropped by 11.5%. When heat capacity was changed to $2.5\;kJm^{-3}K^{-1}\;from\;1.5\;kJm^{-3}K^{-1}$, surface temperature dropped by 8.0%. When daily evaporation was changed to 1 mm from 2 mm, temperature dropped by 5.7%. When heat conductivity was changed to $2.5\;Wm^{-1}K^{-1}\;from\;1.5\;Wm^{-1}K^{-1}$, the peak surface temperature of the pavement fell by 1.2%. The peak pavement surface temperature under the arbitrary basic condition was $24.46^{\circ}C$ (12 a.m.). 3) It accordingly became evident that the pavement surface temperature can be most effectively lowered by using materials with a high albedo, a high heat capacity or a high evaporation at the pavement surface. The glare situation, however, is intensified by raising of the albedo, moreover if reflected light is absorbed into surrounding physical masses, it is changed into heat. It accordingly became evident that raising the heat capacity and the evaporative capacity may be the moot acceptable measures to improve the thermal characteristics of the pavement. 4) The sensitivity of the surface temperature to major meteorological variables was as follows. When the daily average temperature changed to $0^{\circ}C\;from\;15^{\circ}C$, holding all other variables constant, the peak surface temperature of the pavement decreased by 56.1 %. When the global solar radiation changed to $200\;Wm^{-2}\;from\;600\;Wm^{-2}$, the temperature of the pavement decreased by 23.4%. When the wind velocity changed to $8\;ms^{-1}\;from\;4\;ms^{-1}$, the temperature decreased by 1.4%. When the cloudiness level changed to 1.0 from 0.5, the peak surface temperature decreased by 0.7%. The peak pavement surface temperature under the arbitrary basic conditions was $24.46^{\circ}C$ (12 a.m.)

• The Journal of Internal Korean Medicine
• /
• v.22 no.2
• /
• pp.161-174
• /
• 2001

Objectives : The purpose of this investigation is to evaluate the effect of Chungpesagan-Tang Extracts on reversible forebrain ischemia in Sprague-Dawley rats. Methods : the volume of cerebral infarction and edema, the pathohistological change of neurons, the number of survived neurons, neurotransmitters through immunohistochemical methods, proteins connected with neurotransmitters through immunohistochemical methods and the pathohistological change of neurons through electro-microscopy were investigated. From these reseach data, the protection of neurons and the activity of brain cells were examined. Results : 1. The infaction volume of the control group was 23.9%, and that of the sample group was 16%. 2. The brain edema volume of the control group increased by 17% compared to the normal group and that of the sample group increased by 10%. 3. The light microscopy revealed that the neurons in the ischemia-induced area and CA1 area of hippocampus were most heavily damaged and that the sample group was less damaged compared with the control group. Most pyramidal neurons died in 7 days when brain ischemia was induced. 4. The number of survived pyramidal neurons in the CA1 area of the hippocampus were studied. The normal group had 93 neurons/mm, survived the control group(after 3 days) had 21/mm, the control group(after 7 days) had 3/mm and the sample group 33/mm. 5. The immunohistochemical methods revealed that: (1) In the control group, the sensitivity of GABA, NOS, DBH were increased, and those of Synapsin, eEF-$1{\alpha}$ decreased. NOS and DBH had positive reactions in the control group, but negative in the normal group. (2) In thd sample group, the sensitivity of GABA, NOS, DBH were attenuated, and those of NPY, Synapsin, CaMKII, eEF-$1{\alpha}$ increased when compared to the control group. 6. The electro-microscopy revealed that most neurons died by necrosis and some neurons died by apoptosis. Several imflammation cells appeared in the injured area of neurons. The number of neurons in the sample group that died by ischemia decreased. But, the number that died by apoptosis did not significantly change. Conclusions : The data shows that the effect of Chungpesagan-Tang Extracts on reversible forebrain ischemia in Sprague-Dawley rats is significant.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.44-52
• /
• 2017

This paper is based on a study of the response characteristics of photoelectric type smoke detector chambers according to dust color. Due to an amendment to the Fire Safety Codes to automatic fire alarm systems and visual alarm device, the installation of indoor smoke detectors has become mandatory, but in Korea there is still insufficient research on the non-operation or false alarms that could arise in indoor environments by indoor dust and other environmental conditions etc. In light of this, for this study, research was conducted on the indoor adaptability of smoke detector under various colors of fiber dust that were judged to occur most frequently in among the common indoor dust, photoelectric smoke detector with the lattice-type smoke detection chamber that the smoke detector which is most popular in the country was used, and four colors of fiber dust (brown, white, gray and black) were used the test dusts for carrying out dust and sensitivity testing. Also, the voltage of the photocell part of the smoke chamber was measured, and the scattering phenomenon in the chamber was observed. The result of the testing showed that all four dust types were suitable for dust and sensitivity testing under conditions of pollution A. Yet, there were occasions, at pollution B or C, where the brown, white and gray dust would cause fail alarm during operation testing. And black dust was confirmed to cause non-operation during operation testing. In the case of brown and white dust, the voltage measurement result of the photocell part of the smoke chamber confirmed that the voltage increases as the pollution level increases, and in the case of gray and black dust, the voltage decreases.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.59-64
• /
• 2012

The impact strength of material is considered the most important design factor for small and light products. Impact strength is a unique material property, thus the impact strength should not depend upon the geometry of specimen. However it varies according to specimen thickness, notching method, and notch shape. In this study, the variations of impact strength have been investigated according to thickness, notch shape, and notching method of specimen. Engineering plastics such as PC, ABS and POM have been used in this study. Experimental results showed impact strength increased as thickness decreasesd. PC showed the highest increment of impact strength when the thickness was thin. Fractured section of PC showed brittle fracture behavior when the specimen was thick. However it showed ductile fracture behavior when it was thin. The impact strength of in-mold notched specimen showed higher than that of milling notched specimen. PC showed the highest notch sensitivity among the materials used in this experiment.

• Parasites, Hosts and Diseases
• /
• v.50 no.1
• /
• pp.15-21
• /
• 2012

In Iran, $Plasmodium$ $vivax$ is responsible for more than 80% of the infected cases of malaria per year. Control interventions for vivax malaria in humans rely mainly on developed diagnostic methods. Recombinant $P.$ $vivax$ apical membrane antigen-1 (rPvAMA-1) has been reported to achieve designing rapid, sensitive, and specific molecular diagnosis. This study aimed to perform isolation and expression of a rPvAMA-1, derived from Iranian patients residing in an endemic area. Then, the diagnostic efficiency of the characterized Iranian PvAMA-1 was assessed using an indirect ELISA method. For this purpose, a partial region of AMA-1 gene was amplified, cloned, and expressed in pET32a plasmid. The recombinant $His-tagged$ protein was purified and used to coat the ELISA plate. Antibody detection was assessed by indirect ELISA using rPvAMA-1. The validity of the ELISA method for detection of anti-$P.$ $vivax$ antibodies in the field was compared to light microscopy on 84 confirmed $P.$ $vivax$ patients and compared to 84 non-$P.$ $vivax$ infected individuals. The ELISA cut-off value was calculated as the mean+2SD of OD values of the people living in malaria endemic areas from a south part of Iran. We found a cut-off point of OD=0.311 that showed the best correlation between the sera confirmed with $P.$ $vivax$ infection and healthy control sera. A sensitivity of 81.0% and specificity of 84.5% were found at this cut off titer. A good degree of statistical agreement was found between ELISA using rPvAMA-1 and light microscopy (0.827) by Kappa analysis.