International journal of advanced smart convergence
/
v.11
no.3
/
pp.187-196
/
2022
In this paper, we propose an example of designing and constructing a roof-type solar power plant structure equipped with a Pseudo-BIPV (Building-Integrated Photovoltaic) shape suitable for use as a roof of a small warehouse with a sandwich-type panel structure. As the characteristics of the roof-type solar power generation facility to be installed in the small warehouse proposed in this study, the shape of the roof is not a general A type, but a right-angled triangle shape with the slope is designed to face south. We chose a structure in which an inverter for one power plant and a control facility are linked by grouping several roofs of buildings. In addition, the height of the roof structure is less than 20 cm from the floor, and it has a shape similar to that of the BIPV, so it is building-friendly because it is almost in close contact with the roof. At the same time, the roof creates a reflective light source due to the white color. By linking this roof with a double-sided solar panel, we designed it to obtain both the advantage of the roof-friendliness and the advantage of efficiency improvement for the electric power generation based on the double-sided panel. Compared to the existing solar power generation facilities using A-shaped cross-sectional modules, the power generation efficiency of roofs in this case is increased by more than 11%, which we can confirm, through the comparison analysis of monitoring data between power plants in the same area. Therefore, if the roof-type solar structure suitable for the small warehouse we have presented in this paper is used, the facilities of electric power generation is eco-friendly. Further it is easier to obtain facility certification compared to the BIPV, and improved capacity of the power generation can be secured at low material cost. It is believed that the roof-type solar power generation facility we proposed can be usefully used for warehouse or factory-based smart housing. Sensor devices for monitoring, CCTV monitoring, or safety and environment management, operating in connection with the solar power generation facilities, are linked with the Internet of Things (IoT) solution, so they can be monitored and controlled remotely.
The objective of this study was to determine the important factors affecting the early natural regeneration of Pinus densiflora S. et Z. Seed germination, survival and height growth of the pine seedlings were examined at four experimental plots of P. densiflora forests including forest roadside. Plots I and III were thinned in 1992, plot II was treated with hexazinone in 1993 after seed tree method was applied in 1982 and 1989. Seedlings emerged after thinning and the rate of their emergence depended on forest floor conditions. Seedling survival was related with light conditions, herbaceous vegetation, and degrees of rainfall. More seedlings emerged in forest hauling roads than within the forest because soil scarification due to logging provided better conditions for seed germination and seedling growth. Seed supply was enough, but germination rate was very low in the forest compared with that in the greenhouse because micro-environments such as organic layer and herbaceous plant acted as limiting factors. Weed control was needed for 4 to 5 years until seedlings grew upto about 50cm in height which was similar to that of herbaceous plants. But 10-40% coverage of herbaceous vegetation was needed to protect small seedlings from heavy rain. Forest works such as thinning and logging, over 40% of light were important factors to help the pine regeneration. However, over 70% coverage of herbaceous vegetation, and heavy rain inhibited rather survival and growth of pine seedlings.
In the Natural Monument (No. 432) Jeju Sanghyo-dong Cymbidium kanran Habitat (39 ha), flora, vegetation diversity, stand structure, mirco-climate, canopy openness, light environment and soil temperature and moisture were quantified from Oct. 2013 to Feb. 2014. Compare to Seogwipo-si, daily mean temperature ($5.7^{\circ}C$) and moisture (75.8%) in study area were lower at $3.3^{\circ}C$ and 15%, respectively. Mean soil temperature and moisture were $16.5^{\circ}C$ and 37.3%, respectively, and mean litter layer depth (n = 81) was 4.3 cm. Mean canopy openness and light availability at forest floor were 15.5% and $8.5mol{\cdot}m^{-2}{\cdot}day^{-1}$, respectively. Total of 22 species including vascular and bryophyte plants and 6 vegetation group were observed. Castanopsis siebildii was dominant species in study area, and density and basal area were 1,777 stem/ha and $90.3m^2/ha$.
The purpose of this study was to investigate the need of home modification for outpatient with stroke and spinal cord injury. The subjects of this study were 54 outpatients who have experience in rehabilitation therapy at hospitals in Seoul and Gyeonggi-do. A questionnaire was distributed and collected form January 2th to February 4th, 2012. Descriptive statistics and $x^2$-test were used to analyze data. There were statistically significant difference in stairs of access, in width of front door, in bathroom, space of room according diagnosis. There were statistically significant difference in light of sensor, tissue holder and socket cover in bathroom for the comparison of demands for home modification by living type. There were statistically significant difference in width and threshold of front door, tissue holder and towel bar, nonslip floor in bathroom, space and table, chair of kitchen, space and threshold of porch, light for the comparison of demands for home modification according score of MBI. Based on the results of the survey, needs of home modification is different according disability level, diagnosis, living type, ADL performance. The results of this study show a need for the further occupational therapy of home modification and supporting policies in home modification.
This study was carried out to investigate the effect of energy saving and sound insulation of building materials mixed with charcoal. To investigate the functionality of building based on the difference of construction materials, three different experimental buildings were constructed. They were buildings built with the conventional construction materials (A), the charcoal construction materials (B), and the charcoal-sericite construction materials (C). The study showed that energy consumption could be reduced approximately 9.5% and 14.5% by replacing A with B and C, respectively. Especially, it is revealed that the lower outdoor temperature was, the higher energy saving effect was. Also, after shutoff the boiler switch the decrease rate of room temperature of the one using B was lower than those of others using A and C so that the room temperature at the building using B was higher by $3.5{\sim}4.2^{\circ}C$ in the 1 meter air above the ground and by $4.4{\sim}5.4^{\circ}C$ on the floor surface after 12 hours passed. In the building noise test the heavy-and light-weight impact sound of the plate, represented by criterion of noise between floors in multi-story building, tended to decrease in the test sample containing charcoal.
Proceedings of the Korean Powder Metallurgy Institute Conference
/
2002.07a
/
pp.25-37
/
2002
The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.
Infrared (IR) thermography which is the technique for detecting invisible infrared light emitted by objects due to their surface thermal condition and for producing an image of the light has been applied in various field without damaging the objects. It also could be used indirectly to examine the inside of an object. In this study, insulation property of wooden house in Korea Forest Research Institute (KFRI) was evaluated with according to "Thermal performance of building - Quantitative detection of thermal irregularities in building envelopes - infrared method (KS F 2829)". This method uses "Temperature Difference Ratio (TDR)" between outdoor wall surface and indoor wall surface of wooden building for evaluating its thermal performance. The thermal performance of a room on the 2nd floor of the wooden house was focused in this study and IR thermography on the indoor and outdoor surface of the house was captured by IR camera. Heat loss from the corner and the window of the wooden house as well as wall of the house was quantitatively evaluated and the invisible heat loss in the wall was detected. It is expected that the results from this study could contribute to improve the wooden building energy efficiency.
The Russian icon and Korean tangwha (幀畵, altar portrait of Buddha) are based on the similarity of the divine Being. Each has the characteristic index that forms an existential connection with the object and at the same time, implies the symbolic meaning of the scriptures and doctrines of the Russian Orthodox and Buddhists. Russian icon and Korean tangwha with these attributes have origins in the Byzantine, India and China. Unlike most religious art, Russian icon and Korean tangwha clearly reveal profane orientation and mystical elements. This artistic phenomenon has evolved from the mystical religious culture in Russia and tantric rituals of the early Joseon period. Iconostasis, created from historical figures of the Old Testament, Jesus, the New Testament represent the principles of the macrocosm. Each icon of iconostasis has integrity, while each floor has another narrative and a meta-discourse on the entire composition. Three-Platforms of amrtakundalin can also have a huge epic that is directed from the Low-Platform to the High-Platform for the purpose of salvation. While the narrative of iconostasis has a time structure, from the beginning of the universe up to date in chronological time, amrtakundalin have pictorial transitions of time and space that rises from this life to a heavenly world. Despite the different world views of the Russian Orthodox and Buddhists, iconographical format and symbolism of heaven and hell in the Iconostasis, Last Judgment and amrtakundalin are similar. There is a constant antagonism between heaven and hell, light and darkness, water and flame. Iconographical contents include the water of life and nectar, the book of life and 'eoppu', and the scales and mirror of Karma that discriminate between the good and evil before judgment. The dualistic coordinate concept such as light and darkness, life and death, or heaven and hell that appears in the narrative structure of iconostasis, the Last Judgment and amrtakundalin leads the people to spiritual awakening.
In order to achieve efficiency of laying eggs of silkworms, it is very important to eliminate noncocooning silkworms. This study is written on the basis of observation and analysis of mechanism of silkworms physiologically and anatomically. It is hoped that given herein will contribute to the effecting elimination work. Outline of the study summarize as follows: 1. It is observed through microscope that the silkworms which are seen normal state in the silk gland but no ability of cocoon making have polyhedrosis in the nerve, trachea and muscle near the tissue of the spinneret. 2. Relatively high proportion of non-cocooning silkworms are caused by the grasserie of the silkworms. 3. As a result of inoculation with purulent discharges against silkworms from first fooding through 8th day of 5th instar, number of cocooning silkworms were increased when inoculation are applied at laterer day of the instar. In the case of non-cocooning silkworms, meanwhile, resulted not big varriation when it is apllied in the early and middle of the period, but number of non-cocooning silkworm was reduced when the inoculation are given at laterer of the instar. Number of death during rearing and mounting are increased when earliest application of inoculation are carried out. 4. Symptom of grasserie was appeared more or less three days after application of the inoculation. Some silkworms which were inoculated just before mounting has ability of cocooning making even taken grasserie, in this case the silkworm can make thin cocoon. since the silkworm fall sick during cocoon making and unable of spinning soon. when the worm was affected by grasserie slightly, it was observed that the silkworm can spinning. It is supposed to be the light paralysis of spinneret is not very much influenced to spinning. 5. As a result of observation of original stock and hybrid including other 44 kinds of silkworm, many non-cocooning silkworms were found in the original stock especially originated from japanese than in hybrid. 6. A number of undulations are found in the middle division of the silk gland of non-cocooning silkworms. 7. According to the observation of the sizes of the body and digestive organs, normal natured silkworms and non-cocooning silkworms are more or less same in length, but the width, circumference of bodies and digestive organs were more larger in the later. If silkworm which was in the period of active eating of 5th instar was given shock of dropping to the floor, the silkworm receives little more shock when hit to side of the body than to head, and concrete floor than ondol and wooden floor.
Yang, Ka Young;Jeon, Jung Hwan;Kwon, Kyeong Seok;Kim, Jong Bok;Ha, Jae Jung;Lee, Jun Yeob
Journal of the Korea Academia-Industrial cooperation Society
/
v.20
no.8
/
pp.200-206
/
2019
Korea is introducing new animal welfare rearing standards for swine farmers in order to improve the breeding environment of livestock on Korean farms, Korea is establishing a policy to apply to all new farms in 2019 and to all existing farms in 2025. These guidelines are limiting stall breeding of sows after 4 weeks of pregnancy, the light intensity should be above 40lux, the ammonia level should be below 25ppm and the breeding density area should be increased from $1.4m^2$ to $2.25m^2$. In Europe, where animal welfare has been studied and applied for nearly 100 years, the facility specifications and management manuals are available and provided to farmers to introduce proper animal welfare for pigs and to enhance the convenience and utility of farmers who are converting to raising pigs. The EU has established independent standards for each country, and the EU has set the standards for floor facilities to improve animal welfare on pig farms and as applied by farmers. Yet in Korea, there are no methods and techniques for breeding methods that do not use an ordinary stall, except on a few leading farms. There has been no research on the welfare of sows so that farmer could improve sows' living conditions. Thus, farmers can minimize the difficulty of implementing the changing government policies, and they must develop farm turnover policies and specification management manuals to cope with the introduced regulations on sow group housing. We suggest that conducting research and evaluating the level of sows' welfare are important for farmers.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.