• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.55-72
• /
• 1993

The aim of this study was to compare the marginal leakage of class II light curing composite resin restoration according to filling methods. With using acid etching technique and dentin bonding agent, various methods were suggested to eliminate or reduce the marginal leakage. In this study, class II cavities were prepared in 100 extracted human premolars with cementum margin(1mm below the CEJ) and the teeth were randomly assigned to 5 groups of 20 teeth each. The teeth in group 1, 2, 3 and 4 were restored by direct filling methods using P-50 and Clearfil Photoposterior of 10 teeth each, but the method of insertion of the restorative materials varied with each group. And the teeth in group 5 were restored by inlay method using Kulzer Inlay and CR Inlay. Filling methods are as follows : Group 1 : The composite resin was inserted in one layer in the proximal box and one layer in the occlusal portion. Group 2 : Insertion was in two equally thick horizontal layers in the proximal box. Group 3 : Insertion was in two diagonally placed layers in the proximal box. Group 4 : The composite resin was inserted in the same way as in group 3 except that a glass ionomer liner was first placed on the axial wall and gingival floor. Group 5 : The teeth were restored by Inlay technique using dure cure resin cement. All the teeth were thermocycled, stained with 1 % methylene blue solution, sectioned mesiodistally, and scored for marginal leakage. To compare the marginal leakage, ANOVA and T-test were used in analysis. The following results were obtained : 1. In direct filling methods, there was no significant difference in marginal leakage at both occlusal and cervical margins. 2. In all groups, occlusal margin showed significantly less leakage than cervical margin. 3. In group using glass ionomer liner, there was no significant reduction of marginal leakage at the cervical margin. 4. The group restored by inlay method showed significantly less marginal leakage than groups restored by direct filling methods at both occlusal and gingival margins. 5. There was no significant difference in each group according to filling materials.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.2
• /
• pp.40-59
• /
• 2010

Anssolim is the unique technique which standing columns lean in a inward direction of buildings in traditional architecture, which has not been thoroughly investigated to this day. With a dearth of previous studies, the anssolim technique can only be examined through detailed three-dimensional surveys. The main halls of Korean palaces can be seen as buildings that were built with the regulations of the day in mind, making them excellent research subjects when studying the anssolim technique. The findings can be summarized as follows. 1. In the main halls that were studied, anssolim was applied most to main space (eokan) columns, then lessened for peripheral columns. 2. The largest second-floor cheoma columns were placed inward in the eokan, then became smaller as with the peripheral columns. In the case of the eokan, the columns were arranged according to the size of the anssolim. 3. The second-floor cheoma column anssolim in the middle-floor main hall were generally a third or a quarter of the size of those on the first floor. As on the first floor, the largest anssolim were applied to the eokan columns, then became gradually smaller towards the periphery columns. 4. In the palace main halls, the largest anssolim were used for the eokan columns, and became smaller with the peripheral columns. This unique structure can be seen to be a Korean technique that deviates from the Chinese "Yingzaofashi(營造法式)" techniques. Although this study is limited in that it only studies the main hall of Korean palaces, it is significant in that it shed new light on the technological implications of the anssolim technique, and can be used as important data for research into the history of technology. Although this type of data is difficult to extrapolate, it has been made as accurate as possible by minimizing the margin of error in the data for the palaces that were actually studied.

• Korean Institute of Interior Design Journal
• /
• no.36
• /
• pp.14-21
• /
• 2003

The Propose of this research was to consider how the New Media Architecture was applied to contemporary architecture according to the analysis of the design method process of Toyo Ito. Sendai Mediatheque by Toyo Ito stands as one of the most symbolic statement In New Media architecture. The four principal architectural elements of the Mediatheque are the digital image, the continuous space, the tube, and the skin facade. The digital image express forms of communication, person-to-person and person-to-thing, and they vary according to the media utilized on each level. The three skin elements of the Mediatheque are a double skin of MPG, skin of louvers, skin of fine-floor decking. The tubes act as columns while enveloping light, air, water, electricity the passage of people, as well as the means of transferring material. The thirteen tubes of different sizes prevent the erection of wall and suggest places instead of rooms. Instead of being limited to certain specified actions in clearly defined rooms, people are free to choose places for their actions in the continuous space.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.148-158
• /
• 2012

The objective of this study is to find a possible application of small space utilization of GangSo Housing, so called compact-but-effective housing, through analyzing that of Japanese small housing. We analyze openness of view and flexibility of spaces divided by the physical and architectural aspects as first component and the psychological and interior space aspects as second component. The results showed that Japanese small houses have various unit plan compared to uniformity of Korean houses. Openness of view in Japanese small housing is accomplished by letting in light from the outside using position and shape of the window, looking more spacious using courtyard, void spaces, or sliding door hanging from the ceiling, and creating deception of view using floor-wall plan and appropriate materials. Flexibility of spaces is achieved by combination of first and second components, multipurpose of space and furniture, and variety of storage methods. It is necessary to improve spatial efficiency with consideration of volume-metric planing rather than flat-plane and develop various unit plans to meet residents' needs and demands on compact-but-effective houses.

• Korean Institute of Interior Design Journal
• /
• v.27 no.3
• /
• pp.90-99
• /
• 2018

The purpose of this study is to study how F.L. Wright reflected the climatic properties and materials of the region into creative ways of designing his architecture. The research method examined the design methods and use of materials by Wright in existing research literature and compares the space plans of housing works in Arizona. The research results will be summarized as follows : 1) For two-story houses, pilotis was used to avoid the hot air and the walls on the ground floor were often planned as thick wall. 2) In the fifties, F.L. Wright's design method changed in a circle from the vertical and horizontal lines. 3) F.L.Wright's Architectural form concepts and design concepts were extracted from local symbolic forms and natural forms. 4) F.L.Wright avoided Arizona's direct light but Indirect sunlight enters into the interior space. 5)External space was expressed as a closed space, while internal space was expressed as an open space. It's like an organic space. 6) Most of the housing materials used are stone and cement from rough deserts, and wood with low heat conductivity and thick concrete blocks to prevent the sunlight from rising above.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.859-865
• /
• 1999

Many sensors such as a laser, and CCD camera to obtain 3D information have been used, but most of algorithms for laser calibration are inefficient since a huge memory and experiment data are required. This method saves a memory and an experimental data since the 3D information are obtained simply triangulation method. In this paper, the calibration algorithm of a slit km laser based on triangulation method is introduced to calculate 3D information in the real world. The laser beam orthogonally mounted on the XY table is projected on the floor. A CCD camera observes the intersection plane of a light and an object plane. The 3D information is calculated using observed and calibration data.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.222-226
• /
• 2007

Buildings form interior space when part of an external environment is limited by a physical surface. And, the interior space forms an appearance of building when space-defining elements, such as floor, wall, and roof. An appearance or a form of building has a lot of meanings depending on the physical and psychological conditions, as well as symbolism. Especially, the prevailing meaning of form in the modern age was, "Form follows function," was quite different from the meaning of form in the architectural era of Louis I. Kahn, who asserted "Form always supercedes function," when functional modernism was still existed even after some 50 years later. Existing studies on Louis I. Kahn usually analyzed his architectural terminology and philosophical concepts of Centrality, Light, Order, Form, and Design; or they were focused on an overall plane and the principle of composition. The purposes of this study are: (1) to investigate how the formal composition characteristics of building are expressed on skylights; and (2) to demonstrate that the formal composition characteristics of skylights plays an important role in constructing a whole structure of building in relation with other architectural elements.

• The Korean Journal of Physiology
• /
• v.4 no.2
• /
• pp.69-81
• /
• 1970

These studies were carried out on 176 persons ranging in age from 20 to 50 years to determine the basal metabolic rates, energy expenditure of various activities, and daily energy expenditure of service personnel in Korea. The measurements of basal metabolic rates were made on 42 subjects by indirect calorimetry using a Douglas' bag and Scholander's gas analyzer. The energy expenditures of various activities of daily life were also measured. The greatest increase in ratio of energy expenditure in the basis of resting metabolism was 277.3% in floor sopping and the least was 40.9% during hair cutting by beauticians. The assessment of the dailly energy expenditure for each subject was made by the factorial method, using a record of their activities throughout each of 24 hours of every survey day. Certain activities were recorded in minute units. The total daily energy expenditure is the sum of all energy expenditure. This was calculated by multiplying the caloric value of the metabolic rate by the time spent on each activity. The result of the total daily energy expenditure records for 17 occupations are summarized. In respect to the daily energy expenditure, most of the occupations are moderate or light work. But the janiter (F), laundress, cook (F), room maid and nurse's aid do heavy work.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.168-173
• /
• 1999

Many sensors such as a laser, CCD camera to obtain 3D information have been used, but most of calibration algorithms are inefficient since a huge memory and an experiment data for laser calibration are required. In this paper, the calibration algorithm of a slit beam laser based on triangulation method is introduced to calculate 3D information in the real world. The laser beam orthogonally mounted on the XY table is projected on the floor. A Cm camera observes the intersection plane of a light and an object plane. The 3D information is calculated using observed and calibration data. This method saves a memory and an experimental data since the 3D information are obtained simply triangulation method.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.5
• /
• pp.11-17
• /
• 2012

In this study, a simulation program was developed with heat transfer model in the thermal storage tank for a solar collector and burner combined heating and hot water supply system. Analysis was conducted with variation of operating condition and schedule to analyze performance of a hot water supply and panel heating system with a solar collector and burner combined thermal storage tank. The simulation program is divided two sections. One part is calculation of temperature variation of water which flows through the panel in the floor for heating of the residential house during 24 hours, and the other part is heat transfer calculation for the reaction time to get desired water temperature in the thermal storage tank. As results, light oil consumption and system performance during operation period were analyzed with variation of climate condition and with or without solar collector. Most of the case, oil could be saved about from 24 to 41% with installing the solar collector. The performance of the system is more dependent on radiation time of the solar collector rather than the intensity of the solar radiation which was adopted for the climate analysis.