• 제목/요약/키워드: Light Floor

검색결과 277건 처리시간 0.028초

Prediction of Peak Back Compressive Forces as a Function of Lifting Speed and Compressive Forces at Lift Origin and Destination - A Pilot Study

  • Greenland, Kasey O.;Merryweather, Andrew S.;Bloswick, Donald S.
    • Safety and Health at Work
    • /
    • 제2권3호
    • /
    • pp.236-242
    • /
    • 2011
  • Objectives: To determine the feasibility of predicting static and dynamic peak back-compressive forces based on (1) static back compressive force values at the lift origin and destination and (2) lifting speed. Methods: Ten male subjects performed symmetric mid-sagittal floor-to-shoulder, floor-to-waist, and waist-to-shoulder lifts at three different speeds (slow, medium, and fast), and with two different loads (light and heavy). Two-dimensional kinematics and kinetics were captured. Linear regression analyses were used to develop prediction equations, the amount of predictability, and significance for static and dynamic peak back-compressive forces based on a static origin and destination average (SODA) backcompressive force. Results: Static and dynamic peak back-compressive forces were highly predicted by the SODA, with R2 values ranging from 0.830 to 0.947. Slopes were significantly different between slow and fast lifting speeds (p < 0.05) for the dynamic peak prediction equations. The slope of the regression line for static prediction was significantly greater than one with a significant positive intercept value. Conclusion: SODA under-predict both static and dynamic peak back-compressive force values. Peak values are highly predictable and could be readily determined using back-compressive force assessments at the origin and destination of a lifting task. This could be valuable for enhancing job design and analysis in the workplace and for large-scale studies where a full analysis of each lifting task is not feasible.

주거 및 사무환경 챔버에서의 생활소음에 대한 감성적 평가 (Perceptual Evaluation of Noise Sources in a Chamber for Residential and Working Environment)

  • 전진용;김경호;정정호;류종관;조문재
    • 한국소음진동공학회논문집
    • /
    • 제12권6호
    • /
    • pp.437-444
    • /
    • 2002
  • This paper is to provide the basic way of a acoustical evaluation and efficient control noise by investigating the limits of perceptual loudness of living environment and by finding out any correlation between Physical characteristics of noise and psychoacoustic parameters. The limits of perceptual loudness were selected by the subjects in a chamber for residential and working environment. And the noise sources were analyzed to find out whether there is any correlation with Zwicker parameters and ACF factors. In this study especially, to set up the domestic evaluation grade about floor impact noise. we'd like to suggest the loudness Perception research result as fundamental resource for setting up the evaluation grade through the result that is based on annoyance. In the result of this research, upper limit of heavy-weight impact noise was L-60, and lower limit of it was L-50. On the other hand, upper limit of light-weight impact noise was L-70, and lower limit of it was L-55. It seemed that the loudness of noise from vacuum cleaner noise does not affect its perceived noisiness. Noises implicated In human such as floor walking noise and talking sound, are the most irritating noise in office environment.

18세기 이후 조선사회의 온돌에 대한 인식변화와 난방효율 증대를 위한 건축적 모색 (A Change of Awareness on the Ondol System and Architectural Seeking for Increasing Heating Efficiency since the 18th Century Joseon Society)

  • 정정남
    • 건축역사연구
    • /
    • 제27권3호
    • /
    • pp.15-26
    • /
    • 2018
  • As a result of reviewing various documents and existing researches, since the late Goryeo period, the most active period in the Ondol(溫突, Korean floor heating system) facilities is the 17th century. The phenomenological reason was recovering the buildings destroyed by the Japanese Invasion of Korea in 1592(壬辰倭亂) & the Manchu War of 1636(丙子胡亂), but the underlying cause was an abnormal climate in which a pair of summer and winter cold continued. In the 17th century, as the Ondol facilities grew rapidly without distinction between regions and classes, the supply and demand of fuel caused economic and natural environmental problems. And a negative and positive view on Ondol was suggested. Since the middle of the 18th century, when the demand and supply of Ondol reached its peak, which could no longer increase, a new awareness of Ondol began to grow. The room was called the Panbang(板房) and the Ondol, depending on the material that made up the floor. It was considered natural to have the Ondol from this time on. The Incan(因間) and Jo(竈) that were made to burn were started to be recorded as a kitchen, regardless of size and function. Changes in social awareness of Ondol have led to concerns about heating efficiency. A variety of architectural explorations were conducted. Such a search was later realized in concrete architectural form. There is a double Ondoll structure, and the column spacing is reduced compared to the previous one. The heat buffer space is formed around the Ondol room, and the double window can control the light and the air going in and out.

호주인과 호주교민의 주공간 사용 및 주생활을 통한 주거문화 비교에 관한 연구 - 멜버른(Melbourne)을 중심으로 (A Comparative Study of Housing Cultures between Korean-Immigrants and Australians in Melbourne, Australia)

  • 이영심
    • 가정과삶의질연구
    • /
    • 제24권1호
    • /
    • pp.159-179
    • /
    • 2006
  • Each ethnic group has different cultural backgrounds and each culture has developed with its own traditions. The interaction between different cultures is getting more active through acculturation and cultural contacts. The purpose of this study was to compare domestic living of Korean immigrants with Australians in the form of a Cross-Cultural study. For this, usage of domestic space and seating style of 52 Korean households and 53 Australian households in Melbourne were analyzed. Ethnographic research with questionnaire was used. The results of the research were as follows. 1. The most popular type of Living-Dining-Kitchen arrangement was L+ K. D for Koreans and L. D . K for Australians. 2. A laundry room was indispensable for both and they all wanted to do ironing in there as well as dry. Both were satisfied with the type which toilet was separated from the bathroom Drain hole on the floor of the bathroom was not indispensable for most Koreans and Australians. 3. Koreans and Australians were doing various activities in living area and both were getting together around kitchen(dining) area. The particular thing of Koreans was that they were using the main bedroom with multiple purpose. 4. The seating style of Koreans and Australians belong to chair-seating style generally. But Koreans were using floor seating style in making bed for the guest and making Kimchi. Koreans and Australians were using mixed style of floor seating and chair-seating in relaxing time with watching TV, treating guest or so. 5. Koreans were not satisfied with using carpet cause of dust but Australians were satisfied with the carpet cause of warmness. 6. Most Koreans and Australians were take off shoes inside of the house. Koreans were organize shoes around the front door of the house usually and Australians were organize shoes in bedroom usually. 7. The most popular heating system was ducted heating for both. The level of satisfaction about ducted heating was low for Koreans because they though that it could contaminate air. Australians were satisfied with ducted heating because they though that this one was fit on the weather of this area. 8. Living room was the most important one for Koreans and Australians and they also thought it should be decorated well for entertaining guests. Most Koreans were estimate that the brightness of the light of the house was not enough but it was estimated to moderate for Australians on the contrary.

호주인과 호주 교민의 주거문화 비교를 위한 기초 연구(II) - 호주인의 주공간 및 주생활 분석을 중심으로 - (An Analysis of the Living Arrangement of Australians for Cross-Cultural Study with Korean Immigrants in Melbourne, Australia)

  • 이영심;이상해
    • 대한가정학회지
    • /
    • 제43권9호
    • /
    • pp.143-162
    • /
    • 2005
  • Many ethnic groups have different cultural backgrounds and each culture has developed with its own traditions. The interaction between different cultures is getting more active through acculturation and cultural contact. The purpose of this study was to provide basic data about the domestic living of Australians in order to compare with Korean immigrants in the form of a Cross-Cultural study. For this, usage of domestic space and seating style of 53 Australian households in Melbourne were analyzed. Ethnographic research with questionnaire was used. The results of the research were as follows. 1. The open plan type combining the kitchen, dining and tying areas was the most popular one for Australians and they are very satisfied with that type. 2. The laundry room has been planned traditionally and Australians demand to be able to dry their laundry and do ironing in there additionally. Most of Australians were satisfied with separated toilet and bathroom. h drain hole on the floor of the bathroom was not essential for most Australians. 3. Australians were doing various activities in the living areas and they also enjoy gelling together in the kitchen and dining areas. 4. The seating style of Australians was generally the chair-seating style. However, they sometimes made a bed for guests on the floor and watched TV and treated guests with both chair seating style and floor seating style. 5. Australians were satisfied with using carpet presumably for its warmth.6. Many Australians took off their shoes inside of the house for hygienic reason. Most people organized the shoes in the cabinet of the bedroom. 7. The most popular heating system was ducted heating for Australians and they were very satisfied with it because it was suitable for the weather in Melbourne. 8. The living room was the most important one for Australian families and they thought that it should be decorated well for entertaining guests. It was also considered that brightness of the light was enough for most Australians.

실내 빌딩 환경에서 부하 균등을 고려한 대피경로 산출 (Planning Evacuation Routes with Load Balancing in Indoor Building Environments)

  • 장민수;임경식
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제5권7호
    • /
    • pp.159-172
    • /
    • 2016
  • 본 연구는 복층 건물에서 실내 재난상황이 발생했을 때 적절한 대피경로들을 산출하기 위한 새로운 알고리즘을 제안한다. 제안된 방안은 Disaster Evacuation Graph(DEG)를 도입하여, 탐색시간을 크게 단축시킨다. 또한, 대피 경로 상의 인원수용능력과 그에 따른 인원 분산을 동시에 고려한다. 경로를 탐색하는 과정은 크게 두 단계로 구성된다. 이 때 각 단계는 Horitzontal Tiering(HT)과 Vertical Tiering(VT) 단계라 한다. HT 단계에서는 특정 층 임의의 공간으로부터 계단으로 향하는 가능한 최적의 경로를 산출한다. 그리고 모든 층에 대해 HT 단계를 수행한 이후, 각 층의 모든 공간으로부터 건물 입구나 옥상과 같은 안전지대로 향하는 경로를 결정하기 위해, VT 단계에서 HT 단계의 결과들을 통합한다. 이러한 단계별 과정에서 각각, 층 내 모든 공간으로부터 계단으로 향하는 경로와 각 계단으로부터 안전지대로 향하는 경로가 산출된다. 그리고 이러한 과정에서 경로를 탐색하기 위한 그래프의 범위를 결정하기 위해 티어링(tiering) 기법이 이용된다. 제안된 알고리즘의 성능을 평가하기 위하여, 빠른 탐색과 인원 분산을 위해 기존에 연구되었던 경로탐색 알고리즘들과, 경로탐색에 소요된 시간 및 사용자 대피시간을 비교한다. 제안된 알고리즘은 기존에 비해 더 짧은 시간 내에 빠르게 대피할 수 있는 경로를 산출한다. 특히 경로탐색을 위한 시간복잡도 성능이 뛰어나기 때문에, 높은 층으로 구성된 큰 규모의 건물에서 유용하게 활용할 수 있다.

서울 지하철공사 발파공법의 표준화 (Blasting Standardization works for NATM on the Seoul Subway Construction by Dr, Ginn Huh)

  • 허진
    • 기술사
    • /
    • 제16권3호
    • /
    • pp.5-23
    • /
    • 1983
  • On the Seoul Metropolitan Subway Construction of No. 3, 4 Line, the total length is 57 Km and it is now undergoing almost 55% progress. The working method is classified into Open Cut of 70% and the rest of 30% tunnelling method in the 48 job site. Above tunnelling method is execute by American Steel Support System and the rest of 10 job site carried out by New Austria Tunnelling Method. This paper describes Blasting Standardizations works on the above Tunnelling ' Open Cut Method under big slogan, first safety, second execution. As a superintendent, I strived standardization of works with Better powder, Better Drills ' Better Pattern. Geological structure of Seoul area is composed by Jurassic Granite and also the above rockgroup are over burden by Alluviums as a Unconformity. First of all, I carried out the standard amount of powder and burden through experimental standard blasting by each powder as following Blasting works in the subway construction is surrounding shop Building, under pass the city river and also under pass highest building basement floor. I made allowable Blasting Vibration Value by West-Germany Vornorm DIN 4150, Teil 3 and should measure each blasting works as fellows all of powder is used basically Low-Gravity and Low Velocity such as Slurry, Ammonium Nitrate ' Finex I, II. for Smooth Blasting Instead of Gelatin Dynamite. Electric Detonation Cap is used basically M/S Delay Cup instead of Electric delay ' Simultaneous cap. I applied following formula V=KW3/4 $D^{-2}$ V=Particle Velocity (Cm/sec) K=Ginh Huh's Value W=Delay Charge (Kg) D=Distance(m) In the Open Cut, within 1m distance from H-pile I made to use the Concrete breaker, as following V=7W/$^{0.5}$V/$^{-1.75}$ On the Concentrate Building area, I advise to use Light class drill ø36m Bit and advance 1.1m per round blasting the three boom jumbo drill over ø45mm used only suburb of city.e Light class drill ø36m Bit and advance 1.1m per round blasting the three boom jumbo drill over ø45mm used only suburb of city.

  • PDF

천연활엽수림내 잣나무(Pinus koraiensis) 수하식재 성적 평가 (The Evaluation for the Performance of Pinus koraiensis Underplanting in the Natural Deciduous Forest)

  • 김지홍;강성기
    • Journal of Forest and Environmental Science
    • /
    • 제21권1호
    • /
    • pp.75-82
    • /
    • 2005
  • 이 시험 연구는 울폐된 천연활엽수림 내에 수하식재한 2-2 잣나무 묘목의 생육 성적을 평가하기 위하여 실시되었다. 식재 후 7년 동안의 생존률과 생장율에 대하여 상층 임관의 효과가 평가되었다. 7년생 잣나무 치수의 활착율은 약 80%로 조사되었으며, 평균 수고는 0.9m, 최소치는 0.3m, 최고치는 2.1m로 측정되었고, 평균 근원경은 1.7cm, 최소치는 l.4cm, 최고치는 3.5cm로 조사되었다. 개벌 후, 인공 조림한 잣나무의 생육 상황과 비교해 볼 때, 이 시험에서 수하식재된 잣나무 치수의 생육 상황은 공한지 인공 조림목에 비해서 매우 열등하여, 수고는 약 30%, 직경은 약 20%에도 미치지 못하는 것으로 파악되었다. 내음성이 있는 잣나무 치수라 할지라도 정상 생육하기에 상층의 울폐도가 너무 높다고 판단된다. 잣나무의 정상적인 생장과 발달을 위해서는 천연림 보육 작업에 준하는 벌채를 통하여 우량 활엽수를 잔존시키면서 50% 이상의 상층 임관을 열어 주어 광선 조건을 개선시켜야 할 것이다.

  • PDF

가시광 통신을 이용한 실내 사용자 단말 탐지 시스템 (Performance of Indoor Positioning using Visible Light Communication System)

  • 박영식;황유민;송유찬;김진영
    • 디지털콘텐츠학회 논문지
    • /
    • 제15권1호
    • /
    • pp.129-136
    • /
    • 2014
  • Wi-Fi fingerprinting 시스템은 실내에서 사용되는 위치 측위 방법이며 AP(Access Point)에서 발생하는 RSS(Received Signal Strength)에 의존한다. AP로부터의 RSS는 벽, 장애물 그리고 사람에 의한 간섭과 다중경로 페이딩 효과에 의하여 변할 수 있기 때문에 Wi-Fi fingerprinting 시스템은 낮은 측위 정확도를 갖는다. 또한, Wi-Fi 신호는 벽을 통과하기 때문에 기존의 시스템은 사용자가 현재 위치해 있는 층을 구분하기 어렵다. 이러한 단점을 극복하기 위하여 본 논문은 정확한 실내 측위를 위한 LED fingerprinting 시스템을 제안한다. 제안된 시스템은 LED로부터 발생하는 LED-ID와 LED의 광 파워를 사용한다. 본 시스템의 Training 단계에서는 각 장소에 해당하는 Fingerprinting을 데이터베이스에 기록한다. Serving 단계에서는 K-NN(K-Nearest Neighbor) 알고리즘을 적용하여 기존의 데이터와 새롭게 수신되는 사용자의 데이터를 비교한다. 컴퓨터 시뮬레이션을 통해 CDF(Cumulative Distribution Function) 형태로 본 시스템의 성능을 나타내었고, 시뮬레이션 결과로부터 제안된 시스템은 평균 측위 정확도보다 8.6% 높은 정확도를 얻을 수 있다.

도서관자료(圖書館資料) 보존(保存)에 관한 연구(硏究) (A Study on the Conservation of Library Materials)

  • 권기원
    • 한국비블리아학회지
    • /
    • 제6권1호
    • /
    • pp.179-213
    • /
    • 1984
  • The history of recording and conserving for maintenance the human's memory from ancient times to modern's has brought about a lot of changing process of the recorded information media with developing in culture, and each society has made important recorded materials in his library as essentially the social apparatus. But most of them that were damaged by factors of the natural disaster, humidity, temperature, light, fungi and insects in the library, and were resulted in deterioration and losing the numerous materials. For removing the inevitable phases repeated, there are studying for counterplan of the fundamental environment factors about preservation, restoration and chemical research of materials in advanced countries, but I get a few researches about protecting the cultural properties. Therefore I research the survey of the actual conditions on 72 university libraries centering around them, and then I have researched the collection rate 81 percent, 58 university libraries. (local : 35, in seoul : 23) As the result of this research, I propose the model of the environment factors of conserving the library materials. 1) To apply the equipment of processing the radiant energy to the new construction and buildings. 2) To remove factors that occur fungi and insects by facilities being controlled relative humility, temperature, and to equip the ventilation arrangement in the library. 3) To shelve all acquired and bound materials after proceeding the vacuum fumigator. 4) Those who want to enter into the library stack were surely taken in sterilzing their hands and shoes, and must put on the gown. 5) To use the vacuum dusting thing (machine) for removing the dust without spreading out the floor of the library at any time. 6) To set up the gas automatic fire extinguisher worked by smoke sensor. 7) To assist the research into the preservation, natures and environment of recorded materials, and to supply financial funds for librarian. 8) To hold regularly the workshop be able to educate the methods of preservation materials by the constant system. (Library Association) 9) To add to responsibilities on certification of preservation materials for librarian. 10) To hold the constant committee system in each library. 11) To keep up with the ideal environment (humidity, temperature, light, ventilation, etc.) of preservation materials in the arrangement room, and to put on the gown.

  • PDF