• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.511-517
• /
• 2008

The radiation characteristics and economic efficiency of high - luminance light - emitting diodes (LEDs), a metal halide lamp, and a halogen lamp were studied to evaluate their potential as an energy-saving light source for fishing lamps. The wavelengths at which irradiance was maximum were 709, 613, 473, 501, 525, 465, 578, and 973 nm for red, orange, blue, peacock blue, green, and white LEDs, the metal halide lamp, and the halogen lamp, respectively. If the irradiance characteristics at 300-1,100 nm wavelengths are set as 100%, the irradiance rates at 381-780 nm were 99-78%, 82%, and 24% for the LEDs, metal halide lamp, and halogen lamp, respectively. The economic efficiency was superior in the order metal halide lamp, halogen lamp, peacock blue LED, and blue LED at 381-780 nm and metal halide lamp, peacock blue LED, blue LED, and halogen lamp at 480-520 nm. Based on the radiation characteristics and economic efficiency evaluated at 480-520 nm, the blue and peacock blue LED light sources can be used as energy-saving light sources for fishing lamps.

• Journal of Applied Biological Chemistry
• /
• v.59 no.2
• /
• pp.95-98
• /
• 2016

Phototactic behavioral responses of the Indian meal moth, Plodia interpunctella ($H{\ddot{u}}bner$), adults were determined to different light-emitting diodes (LEDs) of seven wavelengths, and their behavioral responses were compared to that using a commercial luring lamp (BLB) under laboratory conditions. Based on the attractive responses under optimal light conditions (60 lx luminance intensity and 30 min light exposure time), the green LED ($520{\pm}5nm$) showed the highest attractive rate ($520{\pm}5nm$, 52.2 %), followed by the blue LED ($470{\pm}10nm$, 33.9 %), the yellow LED ($590{\pm}5nm$, 32.2 %), BLB (28.9 %), UV LED (365 nm, 22.8 %), the red LED ($625{\pm}10nm$, 14.5 %), the white LED (450-620 nm, 10.6 %), and IR LED (730 nm, 9.5 %). In addition, the green LED to P. interpunctella adults was approximately 1.81 times more attractive than BLB. These results indicate that the green LED could be most useful for monitoring of P. interpunctella adults.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.167-170
• /
• 2004

A high light lantern system using LEDs is composed of power supply, flash controller, and daylight controller and proper case considering work condition. The performance of developed LED lantern is better than that of the existing marine lantern using an incandescent electric lamp and that of foreign products(Vega LED lantern made in New Zealand, Tideland system made in America). The electric consumption of our products is 30% compared with that of existing marine lantern using an incandescent electric lamp, and the luminous Intensity of them is 200% to 400% compared with that of existing marine lantern and foreign LED lantern. In addition, our LED lantern system is easy to repairing something wrong and changing the LED module and other controllers on the sea when they are in accident.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.64-71
• /
• 2018

This study was conducted to investigate the effects of light intensity and wavelength on the growth of Tetraselmis suecica and Tetraselmis tetrathele. These species were exposed to a blue light-emitting diode (LED; max=450 nm), a yellow LED (max=590 nm), a red LED (max=630 nm) and a fluorescent lamp (three wavelengths). The maximum growth rates (${\mu}_{max}$) of T. suecica and T. tetrathele under a red LED were 1.12/day and 0.95/day, respectively. Under a yellow LED, growth rates were 70% of the values for red wavelength, with low half-saturation constants (Ks). The optimum light source to ensure economically effective and productive growth in a Tetraselmis culture system (Photo-Bioreactor) would thus appear to be a three-phase culture, wherein a yellow LED is used during the lag phase and initial exponential phase to increase growth rate, followed by a red LED during the middle exponential phase to maximize growth rate, and finally a yellow LED again during the late exponential phase and stationary phase to achieve increased yield of useful bioactive substances.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.233-238
• /
• 2017

In this paper we propose a freeform secondary lens for an LED fishing/working lamp (LFWL). This innovative LED lamp is used to replace the traditional HID fishing lamp, to satisfy the lighting demands of fishing and the on-board activities on fishing boats. To realize the freeform lens's geometry, Gaussian decomposition is involved in our optics-design process for approaching the targeted light intensity distribution curve (LIDC) of the LFWL lens. The simulated results show that the illumination on the deck, on the sea's surface, and underwater shows only small differences between LED fishing/working lamps and HID fishing lamps. Meanwhile, a lighting efficiency of 91% with just one third of the power consumption can be achieved, when the proposed LED fishing/working lamps are used instead of HID fishing lamps.

• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.100-106
• /
• 2016

We have studied the mycelia growth of four soil-borne fungal pathogens under light qualities and two lighting types (continuous and intermittent) provided by light-emitting diodes (LEDs). As a result, each mycelia growth on Phytophthora cactorum KACC40166, Athelia rolfsii KACC40170, and Helicobasidium mompa KACC40836 strain showed the similar growth rates within 10% or less difference among treatments compared to dark control, regardless of lighting types. However, the mycelia growth on Rosellinia necatrix KACC40168 strain was significantly suppressed by blue, blue+green and blue+red LED as well as fluorescent lamp compared to a dark control, in common with lighting types. The melanin pigment on R. necatrix KACC40168 strain showed relatively to induce more strongly under green LED and fluorescent lamp, whereas no induction under red LED and a control, regardless of lighting types. Thus, the hypha width on R. necatrix KACC40168 was significantly thinned by blue and blue+green LED compared to a control, in common with lighting types.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.1
• /
• pp.39-45
• /
• 2009

The effects of red, blue, and far-red light by illumination of light emitting diodes (LEDs) on growth, morphogenesis and eleutheroside contents of in vitro plantlets of Eleutherococcus senticosus were examined. As a control, plantlets were grown under a broad spectrum white fluorescent lamp (16/8 h illumination). The length of plantlets grown under the red/blue LEDs was taller than those under fluorescent lamps. Leaf area, root length and fresh weight of plantlets were highest under blue light compared to other kinds of light sources. Chlorophyll contents in plantlets grown under fluorescent lamps were higher than those in plantlets grown under LED illumination. Production of eleuthroside B and E in plantlets was highest under blue LED. However, production of eleuthroside E1 was highest under fluorescent lamps. These results suggest that plant growth and eleuthroside accumulation can be controlled by wave length of light under LED illumination system.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.435-443
• /
• 2012

First introduced in 1962, LED(light-emitting diodes) emitted low-intensity red light, but modern versions are now available across the ultraviolet, visible, and infrared spectrum, many with very high luminance or brightness. As a result, growing importance of potential safety harzards for human. Now when certificated of CE provide that testing through IEC/EN 62471 for any lamp. Korea standard adopted as it IEC 62471:2006, Photobiological safety of lamps and lamp systems without change, but effectiveness is incomplete. In this paper, we introduce analysis and direction that urgently come into effectiveness of KS C IEC 62471 as a national standard specifications.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.409-414
• /
• 2015

Light-emitting diodes (LED) have many advantages for dental astral lighting because of their high color rendering index (CRI), low power consumption, light weight and longer life. A dental astral lamp is specially designed and simulated for securing the extra space for installing a multimedia display that will be helpful for treating young patients. The optical system using the reverse dual reflection method consisted of four illumination modules disposed at the four corners of the dental astral lamp, and each module comprises a high power LED, an elliptical mirror, and a multifacet reflector assembly using eight cylindrical mirrors. It is shown that the required illuminance, illumination pattern, and the illumination uniformity are well satisfied.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2006

The advantages of LED(Light Emitting Diode) are low electric power consumption long life time and excellent visibility. In order to design and develope the marine lantern using LED, technical trends and standards about the marine lantern were analyzed and sample products were manufactured and evaluated in comparing with existing marine lantern The performance of developed LED lantern is better than that of the existing marine lantern using an incandescent lamp. The electric power consumption of our products is 30[%] and the luminous intensity is two or fen times brighter than existing marine lantern.