• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.358-368
• /
• 2012

On most construction sites, the arrangement of tower cranes is decided by site engineers based on their own experience, which can cause cost overruns and delays in the lifting work. Although many researchers have conducted studies on tower crane arrangement using computer modeling and knowledge-based expert systems as well as mathematical models, no research has aimed to develop an algorithm to identify an optimum solution among several alternatives for installation areas of tower cranes satisfying the conditions of lifting work. The objective of this study is to develop an automatic arrangement algorithm for tower cranes used in high-rise apartment construction. First, as a new concept, a possible installation area of tower cranes was suggested. Second, after proposing several alternatives based on the installation points suggested in this study, an algorithm analyzing the economic feasibility of tower cranes was developed considering the rental, installation and removal costs. Third, a case study was conducted to prove the validity of the developed algorithm for selecting and installing an effective set of tower cranes at minimum cost.

• 대한산업공학회지
• /
• 제25권2호
• /
• pp.266-273
• /
• 1999

The maximum work capacity at various shoulder angles was estimated in terms of joint moment through maximum voluntary contraction (MVC) measurement, and the result was compared to workload computed from 3-D static lifting model (3DSSPP) based upon national institute of safety and health (NIOSH) lifting guideline (1991). The electromyography (EMG) of anterior/posterior deltoid and trapezius muscle was also recorded to study the function of individual muscle during asymmetric shoulder lifting. Psychophysical workload was measured to observe the difference from MVC or biomechanical estimation. An apparatus was constructed for the study and twenty five trials including five flexion angles and five add/abduction angles were performed isometrically. Results indicated that MVC at 30 degree of flexion was the strongest whereas MVC at 120 degree was the weakest. In case of add/abduction, MVC decreased to 77 to 89 % during add/abduction compared to the MVC at neutral position. Regarding the normalized EMG value, a substantial increase was observed at 30 and 60 degree abduction. More importantly, the shoulder moment computed from maximum permissible limit (MPL) was greater than the moment at MVC condition during 30 degree adduction. Current result can be used as a reference information for a safe workplace design to prevent the shoulder from an excessive work load in industry.

• 대한물리치료과학회지
• /
• 제31권2호
• /
• pp.30-40
• /
• 2024

Background: The purpose of this study is to identify the difference in muscle activity and muscle contraction onset time according to a LLD and object weight When subjects performed a lifting task. Design: Repeated measure design Methods: 15 male adults participated in this study. When subjects performed a lifting task, we measured a difference of muscle activity and muscle contraction onset time in the rectus abdominis(RA), the erector spinae(ES), and the rectus femoris(RF) between both legs using the surface electromyogram (Telemyo DTS, Noraxon Inc., USA). When subjects performed a lifting task, the weight of the object was set to 0% kg, 10% kg, and 20% kg of the subject's body weight, excluding the weight of the box. Results: The difference in muscle activity in the RA, the ES, and the RF between both legs when lifting an object was larger in LLD condition than in non-LLD condition(p<0.05). In all of muscles, the difference of contraction onset time was generally increased as the object's weight increased. Specially, the difference in muscle contraction onset time in the RA, the ES between both legs was larger in the LLD condition than in the non-LLD condition(p<0.05). Conclusion: This study suggests that LLD affects the muscle activity and muscle contraction onset time during lifting objects. It can be used as data to prevent joint damage and muscle due to the LLD during work and movements of daily living.

• 한국응급구조학회지
• /
• 제23권1호
• /
• pp.101-112
• /
• 2019

Purpose: The purpose of the study was to contribute to the prevention of musculoskeletal disorders (MSDs) in 119 emergency medical technicians (EMTs) by evaluating ergonomic risk factors of patient lifting work-postures. Methods: Four procedures were evaluated: using long back-board (LBB) on the sitting and standing main stretcher, using variable stretcher on the sitting and standing main stretcher. Wok-postures were assessed during training. Results: In using LBB on the sitting main stretcher, the OWAS-score was Mode:3 (Mean:2.30, Maximum:3), the REBA-score was Mode:9 (Mean:7.61, Maximum:11), requiring improvement soon. In using LBB on the standing main stretcher, the OWAS-score was Mode:3 (Mean:2.33, Maximum:3), requiring as soon as possible corrective action, the REBA-score was Mode:6 (Mean:5.44, Maximum:11), requiring improvement. In using variable stretcher on the sitting main stretcher, the OWAS-score was Mode:1 (Mean:1.85, Maximum:3), not requiring corrective action, the REBA-score was Mode:6 (Mean:6.78, Maximum:11), requiring improvement. In using variable stretcher on the standing main stretcher, the OWAS-score was Mode:3 (Mean:2.84, Maximum:3), requiring as soon as possible corrective action, the REBA-score was Mode:11 (Mean:9.38, Maximum:11), requiring immediate improvement. Conclusion: All four-procedures showed improvement in work-posture. Thereby, required attention and management in training, occupational health professionals should participate in change of lifting-method, and programs aimed at preventing MSDs should be developed and implemented in fire-academy and fire-station.

• 한국산업보건학회지
• /
• 제31권2호
• /
• pp.156-172
• /
• 2021

Objectives: To investigate the trends of industrial injuries among long-term health care workers in Korea Methods: T7866 injuries were selected from the total industrial injuries approved by the Industrial Accident Compensation Insurance Act(Occupational Safety and Health Act) among long-term health care workers between 2007 and 2016 in Korea. We analyzied the trends of industrial injuries according to work process, occurrence type, and causes. Results: The industrial injuries among long-term health care workers increased since 2012. The mostly occurred area for industrial injuries were low back areas, which is related that the most serious industrial injuries occurred when the one long-term healthcare worker lift manually the recipient, from bed(ondol, Korean floor heating system) to a wheelchair, bed to bath bed, and wheelchair to bath chair. In addition to this, lack of workforce, increased work intensity due to overwork contributed the increasing of occupational injury. Conclusions: This study suggests that the main causes of industrial injuries were Lack of facilities and equipment for small private long-term care institutions, The physical load that goes into lifting the recipient directly, work intensity such as excessive workload and increased work speed. We suggest that the social publicization of long-term care service for the elderly, avoiding ways to lift recipients directly, introducing lifting machines as well as improving working methods, and reducing the workload of caregivers are required.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.65-73
• /
• 1999

Most psychophysical studies in manual material handling (MMH) have paid more attention to two-handed MMH activities than to one-handed MMH activities. Also, studies are involved only with single MMH activities - lifting, lowering, carrying, holding, pushing or pulling. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (lifting a box, then carrying the box, and lowering the box). The objective of this study was to find the psychophysical and physiological responses of human subjects from a simulated industrial task involving one-handed and two-handed combined tasks. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks - lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box from knuckle to floor height - were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. In addition to maximum acceptable weight, heart rate and RPE values on wholebody, back, and arm were also measured as responses.

• 한국직업건강간호학회지
• /
• 제14권1호
• /
• pp.44-55
• /
• 2005

Purpose: The purpose of this study was to describe the current status of work-related back pain among nurses in the U.S. Method: Literature review and website searching were conducted. Key words as 'nurse and back pain (or back injury)' were used in searching the Medline, NIOSHTIC-2and reference list of selected studies. Total studies were selected of which subjects were nurses working in the U.S., and published since 1970. Results: Though there was variation in the measurement among studies, the prevalence rate of back pain among nurses in the U.S. could be estimated about 50%. Risk factors were confirmed as the frequency of patient lifting, ward, nursing shortage, overtime, work shift, stress on physical demand, but age and work experiences showed the inconsistent relation. It has been well known that educational approach is not enough to prevent back pain. Intervention studies to apply the ergonomic approach using mechanical devices reported the effects, but the devices were less diverse than European countries or Canada. The study for lifting team was rare. Federal government developed only the guideline for nursing home that had no legal obligation. As a professional nursing organization, ANA has been trying to educate and advocate for "No lift policy" since 2003. Meanwhile, two trade unions of nurses made efforts to establish the law strengthening the responsibility of health care facilities. Conclusion: The research and policy development will be needed to prepare to rapid increase of back pain among Korean nurses.

• 대한인간공학회지
• /
• 제36권4호
• /
• pp.325-341
• /
• 2017

Objective: The purpose of this study is to suggest the guidelines of operation phases to minimize injuries and musculoskeletal disorders in manual material handling (MMH) tasks through literature reviews. The guidelines are presented as the preparing phase, lifting phase, carrying phase, and lowering phase. Also, we summarized the non-numerical general guidelines for MMH tasks. Background: Manual material handling is still a main cause to musculoskeletal disorders. Method: Procedures of a literature review are classified into database selection, keyword search, title review, abstract review related to literature selection, guideline review and arrangement. A total 48 papers and books were analyzed in detail by title and abstract reviews. Results: In the preparing phase, we suggested the basic conditions in MMH, preparing procedure, clothing and protective equipment, and education. In the lifting and carrying phases, we recommended maximal acceptable weight by frequency and body posture. In the lowering phase, we suggested the lowest weight and safety body postures. Finally, we recommended general guidelines and guideline items for MMH. General guidelines are presented to suggest worker selection, technical education, and work design parts. Conclusion: We suggested the guidelines on the four operation phases of MMH tasks such as preparing, lifting, carrying, and lowering phases. Application: The findings of this study can be utilized as guidelines for proactive recommendations according to workers in MMH tasks.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.95-99
• /
• 1997

Most studies in manual material handling (MMH) have paid more attention to single MMH activities-lifting, lowering, carrying, holding, pushing or pulling and have ignored combined activities. Also, many studies have been involved with two-handed MMH activities rather than to one-handed MMH activities. Very few studies are reported on the determination of workers' capacities for combinations of one-handed MMH activities (e.g. lifting a box, then carrying the box, and lowering the box). The objective of this study was to utilize the psychophysical approach to examine the combinations of lifting, carrying and lowering activities from a simulated industrial task involving one- handed and two-handed combined tasks and to develop mathematical models for combined tasks. Ten male students served as subjects for the study. The capacities that were determined as the maximum acceptable weight workloads for 1 hr work period for one-handed and two-handed combined tasks-lifting a box from floor to knuckle height, carrying the box for 4.3 m, and lowering the box form knuckle to floor height -were determined psychophysically under three frequencies: six handlings per minute, one handling per minute and one handling per five minutes. Combined MMH capacities models for one-handed tasks were developed. Te advantages and disadvantages of different models are discussed.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.1-12
• /
• 1999

The objective of this study was to investigate the metabolic energy consumption rate of the psychophysical Maximum Acceptable Weight of Loads (MAWLs) for different manual materials handling tasks. Lifting activities with four different lifting frequencies (2, 5, 8, 11 lifts/min) for a lifting range (from floor to 76cm height) were studied. The oxygen consumption rate and heart rate were measured or recorded while subjects were lifting their MAWLs. It was found that the relationship between MAWL and frequency can be described best by the exponential function with the R-sq value 0.9865 for this study. Psychophysical MAWL decreased from 22.38 to 7.48 kg, while the oxygen consumption rate with the MAWL increased from 717.8 to $1114.7m{\ell}-O_2/min$ as the frequency increased from 2 to 11 lifts/min. Heart rate also increased from 104.5 to 120.7 bpm. The ratio of oxygen consumption for the MAWL to the Physical Work Capacity (PWC) ranged from 28 to 43%. The MAWLs were greater than or equal to the Maximum Permissible Limits (MPLs) when the frequencies were higher than 8 lifts/min. It seems that the MAWLs by psychophysical approach when the frequencies were higher than 8 lifts/min tend to be overestimated from the viewpoint of the physiological criterion of the oxygen consumption rates. From these findings it is suggested that the NIOSH Guideline should not be directly applied to Korean without reasonable modifications.